Products from Epifanes
In 1902, Willem Heeren founded the paint factory W. Heeren & Zoon in Aalsmeer, the Netherlands, together with his son Albert. Under the brand name Epifanes, the company initially produced paints based on linseed oil. Over the decades, it developed into an internationally recognized manufacturer of yacht paints and coatings for the maritime sector. Today, the Epifanes brand is associated worldwide with high-quality surface treatment in boat finishing.
The Epifanes product range includes a wide variety of coating and painting solutions for maritime applications above and below the waterline. This includes one- and two-component clear and topcoats, primers, undercoats, and antifoulings for different substrates and levels of stress. The systems are suitable for both new constructions and maintenance work and are used in shipyards, professional shipbuilding, and the restoration of classic yachts. Many of the products are compatible within coordinated systems and meet technical requirements for protection, adhesion, UV resistance, and durability.
The Epifanes product range includes a wide variety of coating and painting solutions for maritime applications above and below the waterline. This includes one- and two-component clear and topcoats, primers, undercoats, and antifoulings for different substrates and levels of stress. The systems are suitable for both new constructions and maintenance work and are used in shipyards, professional shipbuilding, and the restoration of classic yachts. Many of the products are compatible within coordinated systems and meet technical requirements for protection, adhesion, UV resistance, and durability.
76 products
EPIFANES Clear Varnish
From
€16.90 *
Popular classic yacht varnish.A clear, high-gloss one-part varnish, long-oil-alkyd-resin based, with good paintability and very high waterproofness.It retains its gloss for a long time even in salt water areas and in tropical climates. High elasticity protects against cracking on working woods. Suitable for painting on raw wood (mahogany, meranti, Oregon pine) and plywood above the waterline indoors and outdoors. EPIFANES Boat Varnish can also be painted on existing intact one and two component clear coat systems. Thinner: EPIFANES 1K Brush Thinner for Pain & Varnish or high quality turpentine substitute.Yield approx. 14m²/l.
EPIFANES Brushthinner for Paint & Varnish
From
€14.95 *
A high quality thinner for brushing or rolling most one-component primers, paints and varnishes. High solving power providing easy thinning. The double destillation of this thinner provides maximum purity.
EPIFANES Paint stirrer
From
€0.50 *
Wooden mixing sticks from EPIFANES. Available in two sizes to match the EPIFANES paint cans.
EPIFANES MONO-URETHANE Yacht Paint
From
€37.90 *
High gloss urethane oil-based finishing paint with good abrasion resistance and high filling properties.The yacht paint is a one-component paint and easy to apply, it dries quickly and almost reaches the hardness and resistance of two-component varnishes after hardening.Suitable for interior and exterior use above the waterline, applicable on aluminum, steel and wood, with the appropriate primer. Can also be used to rework intact existing 1- and 2-component paints. On well prepared gelcoat surfaces, the Mono-urethane paint can be applied directly without a primer. Thinner: EPIFANES Brushthinner for Paint & Varnish, EPIFANES 1K-SpraythinnerYield: approx. 15 m²/l.Note color chart: The colors shown may show slight color deviations depending on the settings of your monitor.
EPIFANES SATIN FINISH white
€41.90 *
A one-component, white silk gloss paint (48% gloss) based on urethane-alkyd resin with lightfast pigments.Suitable as a topcoat for interior use on primed materials like polyester, steel, wood and aluminum, or for exterior use above the waterline as a semi-gloss finish over a high gloss paint system.Can also be applied on existing, intact one- and two-component systems. The paint has great flow properties, hiding power and is resistant to abrasion, alcohol and household chemicals. Thinner: EPIFANES Brush Thinner for Paint and VarnishYield: approx. 13 m²/l.
EPIFANES RAPIDCLEAR wood protection
€32.90 *
A one-component varnish that provides optimal protection in all climate conditions. EPIFANES Rapidclear gives a high-quality satin finish for long-term protection and care of all maritime woods, both inside and outside above the waterline.The paint is based on a modified alkyd-urethane resin. It adheres extremely well to teak and other oily woods, is very water-repellent, very breathable and flexible. It provides a lightly pigmented UV-protection finish, protects against discoloration and supports the natural wood grain. On weathered surfaces, RAPIDCLEAR can restore a uniform appearance. With its quick drying, grain filling properties, it is suitable for fast and easy build-up of varnish without sanding needed between layers. This makes it a great base coating for the final application with EPIFANES Clear Gloss Varnish or EPIFANES Woodfinish Gloss. Can be applied on existing one- and two-component varnishes as well. EPIFANES Rapidclear is for those who want the best in a quick and easy satin finish system with maximum UV resistance and durability.Suitable Thinner: EPIFANES Brush Thinner for Paint and Varnish, EPIFANES 1-K spray thinner Coverage: ca. 13m²/l
EPIFANES Woodfinish Gloss
From
€24.89 *
A great alternative for classic wood oil systems suited especially for resinous tropical wood types and American pine. This high-gloss, one-component clear varnish with UV filter adheres very well to sanded, oil-containing wood types such as teak or iroco.With a layer build of less than five coats, the varnish oil still remains breathable. With more layers of varnish, the wood closes completely. Applicable for coating solid and plywood indoors and outdoors above the waterline, as well as for reworking existing one- and two-component varnish systems.Thinner: EPIFANES Paint Thinner, EPIFANES 1K Spray ThinnerYield approx. 12m²/l.
EPIFANES CR Antifouling Primer
From
€36.90 *
EPIFANES CR Antifouling Primer is a universal underwater ship primer based on chlorinated rubber. Suitable for use on steel, aluminum, wood and polyester. It dries quickly and can be applied to many pre-treated substrates and old coatings. The chlorinated rubber contained in the primer makes it permanently elastic, allowing it to bridge the natural movement of wood, for example.Technical dataSubstrates: GRP, wood, steel, aluminum, existing commercially available antifoulings Pre-treatment: Fouling and adhesions on old coatings must be removed. The substrate must be clean, degreased, dry, well sanded and free of dust. Wash off salt or other water-soluble contaminants with fresh water. Remove grease and oil with ammonia solution or Epifanes Spray Thinner for 1K paints. Old tar and bitumen layers: Should be at least seven days old and free of growth. Soften with an aggressive thinner and/or sand coarsely with P60-80. Steel: should be dry and free of rust, grease, oil, salt and dirt. Degrease with Epifanes cleaning thinner and clean cloths. Rough sand with P60. Clean the surface before painting and allow to dry. Application: For a preservative effect on wood, at least five coats should be applied when recoatingFollow-up coat: all common antifoulingsCoverage: approx. 9 m²/lThinner: EPIFANES D-100 ThinnerApplication method: Brush, fur rollerDrying times at 20°C: Dust-dry: 2 hours, recoatable with itself: after approx. 6 hours, recoatable with antifouling: after approx. 24 hours.Further information on processing can be found in the technical data sheet under “Downloads”.
EPIFANES Stain for Wood or Clear Varnish
From
€18.90 *
Fast-drying, solvent-based stain for coloring and tinting wood, available in reddish mahogany shade and reddish brown teak shade.The stain has a very long color stability and can be recoated with most 1- and 2-component paint systems.For color intensification, up to 3 coats can be applied to the raw wood.For repair painting and color lamination of existing surfaces, up to 10% EPIFANES stain can be added to most 1- and 2-component clear coats. Can be recoated after 2 hours at 18°C. Shake well prior to use. Do not thin.Coverage: 4-7sqm/ 500ml, depending on substrate and application method.
EPIFANES PP Varnish Extra with UV Filter
From
€129.90 *
High-gloss, highly filling, elastic 2-component clearcoat for interior and exterior use.Abrasion-resistant and quick-drying (3 coats per day possible).Primer for solid wood and plywood.Good insulating varnish for oily and greasy woods (e.g. teak). Best adhesion to epoxy surfaces.For UV protection, the exterior must be finished with 1-component clear lacquer or 2-component PU(DD) lacquer.Coverage approx. 14 sqm/l.
EPIFANES POLY-URETHANE Yacht Paint
From
€59.90 *
An extremely hard, resistant and well covering 2-component color paint with particularly good scratch, impact and abrasion resistance. Due to the very good weather resistance, the color-stable high-gloss finish is retained for a long time even in sun and salt water. Suitable for plywood and non-working hardwoods, and as a finishing coat on epoxy coatings and gelcoat / GRP surfaces. Thinner: EPIFANES POLY-URETHANE Brush Thinner, EPIFANES POLY-URETHANE Spray ThinnerCoverage: 12 m²/kg.Note: This two-component paint cannot be used on 1-component paints. Please note that the accuracy of the displayed color chart depend on the settings of your screen and may be different from the original color.
EPIFANES MULTI MARINE PRIMER
From
€32.90 *
EPIFANES MULTI MARINE PRIMER is a universally applicable, quick-drying one-component primer with excellent adhesion properties. Suitable for use above the waterline on wood, fibreglass, steel, stainless steel, aluminium, galvanized metal, copper and most other bare or painted substrates.The primer can also be used as a tiecoat or adhesion promoter between a one- and two-component paint system.MULTI MARINE PRIMER offers exceptional hiding power, high build, good pore filling and corrosion protection on steel. Important: Stir well before application. Do not apply the coats wet-on-wet and observe the recoating interval. To ensure good adhesion between coats, we recommend sanding after each coat. Avoid too thick layers when painting to prevent drying problems. Must not be painted over with epoxy products (filler, primer, paint).Technical DataSubstrate: GRP, hard plastics, wood, steel, aluminium, zinc, galvanized metals, existing 1C/2C coatingsSurface preparation:GRP: degrease, sand dry with P220–280Steel: degrease, sand dry with P60Wood: degrease, sand dry with P220–240Aluminium: degrease, sand dry with P60; new aluminium: apply one coat of EPIFANES WASHPPRIMER AQExisting coatings: clean, sand with P240–280Can be overcoated with: Most one- and two-component products (see technical data sheet)Coverage: approx. 8–10 m²/l at 45 µm dry film thicknessThinner: EPIFANES Brush Thinner (brush), EPIFANES 1C Spray Thinner (spray), EPIFANES D-100 (airless)Application method: Brush, roller, spray gun, airless (professional users)Drying times at 10 °C: Dust dry after 2 hrs; recoatable after 12 hrs (1C), after 48 hrs (2C PU)Further information on application can be found in the technical data sheet under “Downloads”.
EPIFANES Yacht Enamel White
From
€33.90 *
A high-gloss one-component boat paint with good weather resistance and long-lasting gloss. The paint is easy to apply and is characterized by good flow properties and high covering power. Can be used on all interior and exterior materials above the waterline. Can be used on existing and intact 1- and 2-component paints.Color: WhiteThinner: EPIFANES Brushtinner for Paint & Varnish, EPIFANES 1-component spray thinnerYield: approx. 14 m²/l.
EPIFANES POLY-URETHANE DD Clear Gloss With UV Filter
From
€59.90 *
Extremely hard, high-gloss 2-component clear coat with UV filter.It offers particularly good scratch, impact and abrasion resistance. Due to it's great weather resistance, the high-gloss finish is retained for a long time even in sun and salt water. Has very good flow properties and allows easy application by roller, brush or spray gun.Suitable for interior and exterior use, on plywood and non-"working" hardwoods, and as a UV-protective finish on epoxy coatings.Cannot be used on 1-component paint systems.Thinner: EPIFANES POLY-URETHANE Brush Thinner, EPIFANES POLY-URETHANE Spray ThinnerYield: 12 m²/l.
EPIFANES Spraythinner for Paint & Varnish
€20.90 *
Thinner for spray application of one-component primers, paints and varnishes. Also suitable for degreasing wood and lacquer surfaces.
EPIFANES epoxy primer
€54.50 *
EPIFANES EPOXY PRIMER is a good filling, 2-component primer based on epoxy resin. It has very good adhesion to a wide range of substrates, is also a good filler and easy to sand. Has good anti-corrosion properties and is particularly resistant to under-rust in the event of damage. Suitable for underwater and above-water applications on steel, aluminum, GRP and plywood. Tips for application: No sanding is required within a recoating time of 24 hours. After 24 hours, intermediate sanding with P150-180 is recommended. Do not apply wet-on-wet to prevent runs and drying problems. Avoid application in direct sunlight or in excessive wind, as this leads to a rapid loss of solvent, which affects the flow. Technical DataSubstrate: Steel, aluminium, plywood, GRP/polyesterSurface preparation:Surfaces must be free from rust, grease, oil, wax and saltRinse with fresh water and pressure washer or emulsifierDegrease with ammonia solution, MEK or EPIFANES 1C Spray ThinnerTopcoat: Epoxy or polyurethane paints, e.g. EPIFANES Poly-urethane DD VarnishCoverage: approx. 10 m²/l Thinner: EPIFANES D-601Pot life at 15°C: 12 hrs.Application method: Brush, solvent-resistant roller, spray gun, airlessDrying times at 10 °C: Dust dry after approx. 1 hr; recoatable after 12 hrs; fully cured after 7 daysFurther information on applying the product can be found in the technical data sheet under “Downloads”.
EPIFANES Cleaning Solvent
€18.90 *
Solvent-based prep cleaner to clean and degrease raw steel and wood surfaces before painting.Not suitable for GRP surfaces. We recommend EPIFANES Polyester Degreaser for this.
EPIFANES Thinner for PP Varnish Extra
€32.90 *
A fast evaporating thinner for Epifanes PP Varnish Extra. Also suited for degreasing teak wood.
EPIFANES RAPIDCOAT rapid satin varnish
€32.90 *
Fast-drying, silk matt varnish with good weather resistance and UV protection.Adheres well to teak and other oily woods and protects against discoloration due to its brownish pigmentation.On weathered surfaces, EPIFANES Rapidcoat can restore a uniform appearance.Suitable for filling and priming wood in preparation for e.g. EPIFANES Clear Varnish or EPIFANES Woodfinish-Gloss. Can also be used for overcoating existing one-component clearcoats and can also be overcoated with all one-component lacquers. Use indoors and outdoors above the waterline.Thinner: EPIFANES Brush Thinner for Paint and VarnishYield approx. 13m²/l.
EPIFANES Anti-slip Additive
From
€13.49 *
Anti-slip additive for EPIFANES MONO-URETHANE or EPIFANES POLY-URETHANE DD Yacht Varnish. By mixing the powder into the paint before application, an anti-slip paint can be mixed in the respective color shade. Can of 20g, sufficient for 750ml of paint.
EPIFANES Waterline Paint
From
€19.50 *
Waterline paint is a high gloss, water and weather resistant, single component paint specially developed for waterline application by the Dutch manufacturer EPIFANES. Suitable for fresh and salt water areas. Can be applied on all materials on a well adhering paint system above the waterline.It is recommended to paint the water pass or waterline with a distance of 5-10cm above the water (at full load), so that the paint does not have a constant water load later. Available in various shades.Yield: approx. 14 m²/l.The color samples may differ from the original color shades due to monitor or printer settings and serve only as a guide.
EPIFANES POLY-URETHANE Primer
From
€46.80 *
EPIFANES POLYURETHANE PRIMER is a hard 2-component polyurethane primer. The primer has excellent adhesion properties, fills small pores and scratches and ensures a smooth surface for subsequent final coating with colored EPIFANES POLY URETHANE paint. The primer fills the substrate well, is easy to apply with a roller or brush and is easy to sand.Area of application: Interior and exterior above the waterline, on untreated GRP or gelcoat. The primer also adheres to existing 2-component polyurethane or epoxy coatings above the waterline.Technical DataSubstrate: Gelcoat, epoxy coatings, existing old 2-component coatingsSurface preparation:GRP/Gelcoat: degrease, sand with P180Epoxy (HB/Primer): degrease, sand with P120–P180Old coatings: degrease, sand with P180–P220New aluminium: apply one coat of EPIFANES WASHPPRIMER AQTopcoat: EPIFANES Poly-urethane Varnish, for other paints see technical data sheetCoverage: approx. 10 m²/l at 35 µm dry film thicknessThinner: EPIFANES Poly-urethane Brush Thinner / Spray ThinnerApplication method: Brush, roller, spray gun (professional use)Drying times at 10 °C: Dust dry after 2 hrs; recoatable after 12 hrsFurther information on applying this product can be found in the technical data sheet under “Downloads”
EPIFANES COPPER CRUISE Self Polishing Antifouling
From
€45.90 *
EPIFANES COPPER CRUISE is a highly efficient antifouling containing copper and biocides with a self-polishing effect and excellent long-term fouling protection in fresh, brackish and salt water. Copper release technology combines the advantages of hard antifouling and self-polishing antifouling with significantly improved fouling protection. Compared to conventional copper-containing antifoulings, the active ingredients are optimized and released in much smaller quantities, which benefits the environment.Can be easily applied to most commercially available underwater primers, as well as hard and self-polishing antifoulings. Suitable for all sailing and motor boats with a maximum speed of 30 knots and for all boat building materials except aluminum. Not suitable for long-term moorings that are not moved or only moved a little throughout the season. This antifouling has a Dutch approval (approval no. 14301). Technical dataArea of application: Waters with medium to heavy foulingBoat type: motor and sailing boats up to 30 knotsSubstrate: all materials except aluminumCoverage: approx. 10 m²/lDilution: Not recommended, max. 2-3 % with EPIFANES Thinner D-100Application method: Brush, rollerDrying times at 20°C: Dust-dry: approx. 30 min., recoatable: after approx. 8 hoursService life (time between painting and wetting) at 20°C: min. 24 hours to 1 monthFor information on processing, please refer to the technical data sheet under "Downloads". 
EPIFANES Yacht Enamel
From
€33.90 *
A high gloss, weather resistant alkyd resin paint with good flow properties and high coverage, available in 46 standard color shades.Suitable for use on primed gelcoat, steel and aluminum surfaces indoors and outdoors above the waterline. Also suitable for reworking existing 1- and 2-component systems. Select the shade from the shade card (the shade may appear slightly different due to your screen settings!). Yield: approx. 15 m²/l.
