Produkte von Ketten Wälder

The CROMOX Anchor Twister Original CATO is an anchor-chain connector developed by stainless steel chain specialist KETTEN WÄLDER, designed to match the breaking load of the corresponding DUPLEX anchor chain.Manufactured in Germany from high-strength, corrosion-resistant 1.4462 DUPLEX (AISI 318LN) stainless steel.Thanks to its special design and the smooth-running, rotatable ball head of the anchor swivel, the anchor aligns itself during hoisting so that it fits well against the anchor roller. This prevents the anchor chain from twisting and potentially causing damage.With the innovative quick-change system, the anchor can be easily and simply detached from the anchor chain or replaced. The chain and anchor are each secured with a bolted pin (hex socket).

Short-link anchor chain made of the exceptionally high-strength DUPLEX stainless steel alloy 1.4462 (AISI 318LN), Grade 6. Calibrated and conforming to DIN 766A. The chain offers high corrosion resistance in saltwater, even at high water temperatures up to 35 °C (PRE value approx. 34). The surface is electropolished.It is delivered as a complete coil, which is cut to your specified length. The delivery time is approximately 3 weeks. Each coil delivery includes a factory certificate in accordance with EN 10204-2.2. We have loose chain by the meter “in stock” in case you need a shorter length (e.g., as a high-strength section of your shrouds or as a chain lead-in).CROMOX stainless steel anchor chains achieve their maximum corrosion resistance when electropolished. During electropolishing, the surface is microscopically smoothed through electrochemical material removal. In addition, chromium and nickel accumulate on the surface, leading to the formation of a durable passive layer. This combination of a minimal surface area and an optimal passive layer results in outstanding corrosion resistance. KETTEN WÄLDER provides a 3-year corrosion protection warranty on these chains.CROMOX anchor chains are manufactured in Germany by KETTEN WÄLDER. These chains offer maximum safety thanks to their exceptionally high breaking strength, as well as significant weight savings, since a smaller chain diameter can be used while maintaining the same breaking strength. They are lightweight and fit neatly into the chain locker without clumping. The surface of the chains is very smooth, resulting in minimal adhesion of silt and sand and thus virtually no problems with dirt or fouling.This chain is also available with a simply polished, bare surface (see “Similar Products”).Upon request, this chain is also available with gauge marks in accordance with ISO 4565.

Short-link anchor chain made of the particularly high-strength DUPLEX stainless steel alloy 1.4462 (AISI 318LN ), grade 6. Calibrated and true to gauge according to DIN 766A. The chain has high corrosion resistance in salt water, even at high water temperatures up to 35° (PRE value approx. 34). The surface is bright.Minimum order quantity 20 m. Delivery is made in whole bundles from 20 m length, made up according to your length specification. Each bundle is supplied with a works certificate according to EN 10204-2.2. Delivery time approx. 3 weeks. CROMOX anchor chains are produced in Germany by KETTEN WÄLDER. These chains offer the highest level of safety due to their particularly high breaking strength, or a significant weight saving, since a smaller chain diameter can be used for the same breaking strength. They fall easily and lay well in the chain case. The surface of the chain is smooth, so there is little adhesion of silt and sand, and thus hardly any dirt and fouling problems.This chain is also available with electropolished surface (see matching articles). We can also supply electropolished chain in shorter lengths.A true to gauge chain according to ISO4565 is also available on request.

Short-link anchor chain made of high-strength stainless steel 1.4404 (AISI 316L), grade 6. Calibrated and true to gauge according to DIN 766A. The chain has high corrosion resistance in salt water, even at high water temperatures up to 28° (PRE value approx. 25).  The surface is electropolished.Minimum order quantity 20 m. Delivery in whole bundles from 20 m length - made up according to your length specification. Each bundle is supplied with a certificate according to EN 10204-2.2. Delivery time approx. 3 weeks.CROMOX stainless steel anchor chains reach their maximum corrosion resistance in electropolished condition. During electropolishing, the surface is microscopically smoothed by electrochemical material. In addition, chromium and nickel accumulate on the surface, resulting in the formation of a resistant passive layer. This combination of minimum surface area with optimum passive layer results in excellent corrosion resistance.CROMOX anchor chains are produced in Germany by KETTEN WÄLDER. These chains offer maximum safety due to a particularly high breaking force, or a significant weight saving, since a smaller chain diameter can be used for the same breaking force. They fall easily and lay well in the chain case. The surface of the chains is very smooth, so that there is little adhesion of silt and sand, and thus hardly any dirt and fouling problems.This chain is also available with a plain polished, bright surface (see matching articles).A true to gauge chain according to ISO4565 is also available on request.

Short-link anchor chain made of high-strength stainless steel 1.4404 (AISI 316L), grade 6. Calibrated and true to gauge according to DIN 766A. The chain has high corrosion resistance in salt water, even at high water temperatures up to 28° (PRE value approx. 25).  The surface is bright.Minimum order quantity 20 m. Delivery in whole bundles from 20 m length - made up according to your length specification. Each bundle is supplied with a certificate according to EN 10204-2.2. Delivery time approx. 3 weeks. CROMOX anchor chains are produced in Germany by KETTEN WÄLDER. These chains offer the highest level of safety due to their particularly high breaking strength, or a significant weight saving, since a smaller chain diameter can be used for the same breaking strength. They fall easily and lay well in the chain case.The surface of the chains is smooth, so there is only minimal adhesion of silt and sand, and thus hardly any dirt and fouling problems.This chain is also available with an electropolished surface (see matching articles).A true to gauge chain according to ISO4565 is also available on request.

Chain foregoer made from high strength DUPLEX stainless steel 1.4462 quality grade 6. Made by Ketten-Wälder in Germany. This chain exhibits a very high corrosion resistiveness (resistant to 35°C water temperature). Breaking loads are reached which are more as twice as high as those or normal glavanized chain.Each length is 5,00 m - provided with larger end links on both ends, through which it is possible to run a shackle, surface shiny.

Eye load hook type COHF with safety flap, completely made of high strength and low carbon stainless steel with grade 6, surface sandblasted. The hooks are tested and approved for lifting loads. German product from KETTEN WÄLDER..