Shroud plates, also known as eye plates, initialise traction forces of the shrouds into the hull. They have an eye to be attached to shrouds and stays. In sailing, for a more precise distinction, they are called shroud plates, forestay plates, backstay plates or even more special, bowsprit shroud plates. These fittings are either attached to the hull or a shored up part of the deck. Chainplates and stemhead fittings are fittings which are firmly attached to the stem of a ship. A stemhead roller with chain roller for the anchor chain belongs to this category. Our corresponding, beautifully shaped fittings for traditional ships, classic yachts and dinghies are primarily made of cast bronze.
- Rigg & sail
- Rope & cordage
- Anchoring & mooring
-
Hull & deck
- Sheet winches & halyard winches
- Cleats, clutches & CLAMCLEAT
- Tracks & slides
- Chain plates & stemhead fittings
- Pad eyes & fairleads
- Hooks & eyelets
- Hand rails
- Flags & flagstaffs
- Portlights & hatches
- Ventilation
- Steering wheels, tillers & rudders
- Specialities for motorboats
- Dinghys & rowboats
- Letters & plates
- Navigation lights
- Outdoor lights & deck spots
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Chain plates & stemhead fittings
Mounting plates in straight-rhombus (diamond) shapes. Designed as staysail chainplates.Four countersunk fastener holes for mounting, two attachment points (8 mm and 10 mm).Heavy mounting plates of cast manganese bronze.For attaching shackles or turnbuckles.Because of the dimensions, these plates are known for their high breaking strength.Tumbled matte finish. A product of the renowned American foundry SPARTAN.
Solid deck plate/deck tang for the forestay made from seawater resistant cast bronze.Pentagonal, with 4 fastening holes.Stud with 2 bores (for forestay and staysail tack).Surface: tumbled with matt finish.
This bow fitting, made from hand-polished solid cast bronze, is intended be screwed into the stemhead.Two strong eyes with 10mm diameter for forestay, headsail, etc.. DAVEY labelling DL 3727.For small boats.
Patented U-bolt with watertight and UV-resistant (black) rubber cover. This deck bolt can be mounted without sealant. The shape of the rubber cover protects the deck from rattling tether carabiners and dropped wrenches. The U-bolt is made from high-quality stainless steel (1.4567) with a guaranteed breaking strength and working load. Come complete with backing plate and nuts.
Strong shroud or chain plate with triangular ground plate made from seawater resistant cast bronze and 3 holes for mounting screws.Surface: tumbled with matt finish.The drilled eye of the whiskerstay fitting is situated high enough above the ground plate for the turnbuckle not to touch it.
Square mounting plate.4 fastener holes, one eye.Heavy mounting plate made of high-tensile cast marine bronze. For attaching turnbuckles and shackles. Because of the dimensions, these plates are known for their high breaking strength.Tumbled matt finish.A product of the renowned American foundry SPARTAN.
Base plate in a diamond shape with two countersunk mounting holes and a web with a hole for attaching stays, turnbuckles or shackles. These heavy-duty chainplates, made from high-strength marine bronze, are designed to withstand high breaking loads due to their dimensions.Surface: matt tumbled bronze.A product from the renowned American foundry SPARTAN.Technical specifications:Item No. 1380-181:Hole for stay attachment: 10 mmCountersunk fixing holes: 12 mmItem No. 1380-182:Hole for stay attachment: 8 mmCountersunk fixing holes: 10 mmMounting plates (chain plates) in rhombus (diamond) shapes.Two fastener holes, one eye.These heavy mounting plates cast of high-tensile marine bronze work well for attaching shackles or turnbuckles.Because of the dimensions, these plates are known for their high breaking strength.Tumbled matte finish.A product of the renowned American foundry SPARTAN.
Polished or chromed cast brass - for multiple uses. Long oval shape. The eye is screwed in from below with M5 threaded bolts and matching nuts. Comes complete with threaded bolts (length 60 mm) and nuts.
Light shroud plate with long oval ground plate made from seawater resistant cast bronze and 2 holes for mounting screws.Surface: tumbled with matt finish.The drilled eye of the whiskerstay fitting is situated high enough above the ground plate for the turnbuckle not to touch it.
Trapezoidal mounting plate.4 mounting holes, 1 eye.Heavy base plate of cast high-strength marine bronze. For attaching turnbuckles or shackles.Because of the dimensions, these plates are known for their high breaking strength.Tumbled matt finish.A product of the renowned American foundry SPARTAN.
Light bow fitting for dinghies.Made from hand-polished cast bronze.Screws into the stemhead.Two strong eyes for the forestay, etc.DAVEY labelling DL 3729.
Traditional shroud plate for shrouds and stays, with flat eye.Hot-dip galvanized cast iron.The galvanized shroud plate is drilled with countersunk holes before it's galvanized.
Hand-polished cast-bronze plate for shrouds and stays. DAVEY No. 9471.With flat eye.The bronze shroud plate comes undrilled, so that the attachment points can be matched to the boat's specific requirements.
Shroud plate with protruding eye for jibstays, but also appropriate for shrouds. DAVEY 9472.The hand-polished cast-bronze mount comes undrilled, so that the attachment points can be matched to the boat's specific requirements.
Classic foredeck fitting for sailing dinghies or small cruisers.Bronze with boreholes (type Jolly 3 and type Pirat 2) for forestay and staysail tack and one elongated hole for the shackle of the mooring line.Surface: tumbled with matt finish.
Strongly executed, shapely fitting made of high-strength aluminium cast bronze, fine matt tumbled from European production. For attaching the water stay of the bowsprit to the stem.Also suitable as a side eye plate to hold the bowsprit side stays.The base plate of the fitting is slightly tapered downwards in plan view.Available in three sizes, the largest of which has a third hole in the base plate.
