Sound signals and day shapes indicate a vessel’s condition, manoeuvres or particular circumstances to other traffic. The signalling equipment that must be carried and displayed depends on vessel length, area of operation and the applicable regulations. In seagoing and inland commercial shipping, this includes sound signalling systems, ship’s bells and gongs as well as balls, cones, cylinders and diamond-shaped day signals.
TOPLICHT supplies electronic and compressed-air sound signalling systems for different vessel sizes. Depending on the design, signals are generated by pressure-chamber loudspeakers or pneumatic horns, while control panels can operate prescribed sequences and fog signals. The range also includes approved ship’s bells and signal gongs, together with compressors, solenoid valves, compressed-air tubing and associated components. Selected systems carry BSH, MED or other product-specific approvals.
For visual signalling, the range includes folding day shapes intended for use in accordance with COLREG requirements and inland-navigation regulations. These include black and coloured signal balls and cones as well as cylinders and diamond shapes. Their frames are made from galvanised steel rings covered with mesh material, providing the required form while keeping wind resistance down. After use, the shapes can be folded flat for storage on board.
Heavy ship's bell made of polished brass. The bell is manufactured using the traditional sand casting process. It is cleanly turned and polished on the outside and cast-grey on the inside. The surface is unlacquered.Type-tested and approved by the BSH (Federal Maritime and Hydrographic Agency - Bundesamt für Seeschifffahrt und Hydrographie). You will find the National Approval as a pdf file under "Downloads".Equipment regulation according to KVR/COLREG, rule 33a:All ships over 20 m (ship class I, II, III) carry a bell with a diameter of at least 300 mm.Ships under 20 m (ship class IV) are not required to be equipped in accordance with COLREG/COLREG. However, a bell with a diameter of 200 mm is recommended.Delivery includes test certificate for the bell.
Marco EW3 electronic sound signaling system with pressure chamber loudspeaker.The system is approved for ships < 75 m (IMO Class IV) by RINA, Bureau Veritas, Lloyd's Register and BSH as a sound signaling system ("whistle") in accordance with KVR (COLREG 1972). You will find the relevant certificates at the end of the user manual (see "Downloads").Technical featuresSound frequency 675 HzLoudness 122 dB(A) at 1 mIntegrated ultrasonic preheating of the membrane for improved sound quality at low temperaturesFor 24 VDimensions: see photo 2Weight: 3.8 kglisten to the sound here.OperationThe control panel can be used to start fog signals or individual tone sequences (up to eight tones) with a repetition of 60 or 90 secondsThe horn can be activated as required using a separate push button (not included) - with absolute priority, e.g. before a fog signal that has already been startedScope of deliveryWaterproof (IP67), heatable horn (loudspeaker) with bracket for mounting on the mastA factory-fitted, one meter long, tin-plated power cable with a cross-section of 2 x 1.5 mm² is attached to the acoustic horn. To ensure watertightness, the cable gland is sealed (opening the seal will invalidate the warranty). The required cable length to the control unit must be connected to this cableControl unit with sound generator for below-deck installationControl panel for bulkhead mounting5 meter RJ45 cable for connecting the control panel and control unit. Note: The watertight cable gland in the control unit is unfortunately too small for the plug size of this cable and must therefore be adapted. In the control panel, the plug of the cable ensures that the box cannot be closed again. Therefore, use the control panel for bulkhead mounting.
A replacement part of the electronic horn MARCO EW3 is also the acoustic horn (loudspeaker) for mounting in the mast..Fitting also as bull horn loudspeaker for outside montage.
Horn for use with compressed air.Pleasant deep tone: approx. 315 Hz, volume 123 dB(A) (1 m).For ships up to 20 metres in accordance with the international COLREG 1972 regulations.EU approval for IMO Class IV from RINA, Lloyd's Register, BureauVeritas, MCA, BSH and NMMA.Comes complete with compressor MARCO M1, air tube (5,0 m long, 8mm) and assembly materials.The distance between horn and compressor should not exceed 5,0 m in order to avoid pressure loss.Brass horn, painted white or chromed.Frequency approx. 315 Hz, 123 dB(A) (1m). Listen to the sound here.The matching compressor MARCO M1 is available as a spare part.
Electronic sound signaling system with pressure chamber loudspeaker and microphone for audio announcements. The system has an approval for ships up to 20 m as a signal system and fog horn, according to COLREG 1972, IMO Class III, approved by BSH, RINA, Lloyd's Register, MCA, BureauVeritas.The EW2M sound signaling system consists of the waterproof (IP67) sound horn (loudspeaker) for mounting on the mast, the control box with sound generator (200 x 150 x 80 mm), the control panel and a microphone with talk button.The sound frequency is 675 Hz, the loudness 122 dB(A) at 1 m. A signal of up to 8 tones can be programmed, with a repeat frequency of 60 or 90 seconds.The integrated ultrasonic preheating of the membrane improves the sound quality under cold conditions. Listen to the sound here.Available for an on-board voltage of 12 volt or 24 volt.Operation:either via the supplied control panel, which is connected via an RJ45 cable (also supplied) (length 5.0 m),or via a pressure switch (not included).
Compact, lightweight, quiet compressor with an 8-liter storage tank.Stays stable thanks to four rubber feet and features a convenient carrying handle on the motor. The compressor is equipped with a pressure gauge and a condensate drain valve.It is suitable for audible warning systems and other compressed air applications on board. According to the manufacturer, however, it is not designed for continuous operation.Technical SpecificationsAvailable for 12 V or 24 V onboard power systemsMotor power: 240 wattsOperating pressure up to 8 barAir delivery: approx. 47 liters of air per minuteConnection: 1/4" screw fitting with hose nozzle and union nut for 8 mm plastic tubing (6 mm inner diameter). You can find this compressed air hose further down on this page under "Accessories & Replacement Parts."
Ships bell made from brass with wall bracket. The bell is manufactured in the traditional casting method and has a high gloss finish.The wall bracket is supplied with a mounting wedge: only this piece is screwed on. Thus the bell can simply be dismounted from the wedge and put away.These bells are die-cast from brass and therefore have a clear, high sound. The bell with diameter 300 mm is RINA approved as signal bell of ships over 20 m with carriage requirements. Shipment: bell, bracket, mounting wedge. Available with polished or chromed finish.
The horn complies with the KVR (COLREG) requirements for audible signaling systems on seagoing vessels less than 75 meters in length. Furthermore, it may be used on inland waterway vessels (< 75 meters) operating on European waterways and German maritime waterways, where the same acoustic signaling regulations apply as for seagoing vessels of the same length.The H400 Maritone compressed-air horn from Den Haan Rotterdam has an audible range of more than one nautical mile.The diaphragm housing is made of 316L stainless steel, and the diaphragm is made of phosphor bronze. The bell is made of brass and painted white (with a red interior). These high-quality materials ensure a long service life.Operation requires an 8x10 mm compressed air line with a connector, a solenoid valve, and a pushbutton or control panel. You can find all of these under “Accessories & spare parts” further down on this page. The connected compressor must deliver an air flow rate of at least 8–12 l/s at a pressure of 7 bar. Technical SpecificationsSound pressure: 130 dB at 1/3 octave or 140 dB(A)Frequency: 440 HzRequired compressed air: 7 barAir consumption: 8 to 12 l/sConnection: ¼" with coupling for plastic hose (⌀ 10 mm).Materials: Stainless steel (1.4401) diaphragm housing and a brass horn with a white (red on the inside) powder coatingApproval: Seagoing vessels and inland waterway vessels on German inland waterways (each < 75 meters in length)
Horn PW2-B for use with compressed air. For ships up to 20 metres in accordance with the international COLREG 1972 regulations.EU approval for IMO Class IV from RINA, Lloyd's Register, BureauVeritas, MCA, BSH and NMMA.Comes complete with compressor MARCO M1, air tube (5,0 m long, 8mm) and assembly materials.The distance between horn and compressor should not exceed 5,0 m in order to avoid pressure loss.Brass horn, painted black or chromed.Frequency approx. 315 Hz, >120 dB(A) (1m). Listen to the sound here.The matching compressor MARCO M1 is available as a spare part.
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The anchor ball / signal ball can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Diameter: 600 mmColour: black
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The signal rhombus can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Measurements: 600 x 1200 mmColour: black
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The signal cone can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Measurements: 600 x 600 mmColour: blue
MARCO acoustic funnel for operation with compressed air.In accordance with COLREG 1972, IMO Class III approved by RINA, Lloyd's Register, BureauVeritas for ships up to 75 m in length.Sound funnel made of brass, surface painted white.Compressed air supply of 6-12 bar (6 l/sec) is required on board. The electromagnetic control valve is supplied. It must therefore be ordered to match your on-board voltage (12 volt or 24 volt).The scope of delivery also includes: 10 meter plastic compressed air line 6x8 mm and connection material.Frequency 315 Hz, 132 dB(A) (1 m). listen to the sound here.
MARCO Horn for use with compressed air.Pursuant to COLREG 1972, IMO Class III, approved by RINA, Lloyd's Register, BureauVeritas. For vessels of 20-75 m LoA. Brass horn, painted black or chrome plated.The horn requires an onboard compressed-air supply of 6-12 bar (6 l/sec).The magnetic valve is included. The system must be ordered to match your 12 Volt or 24 Volt power supply for this valve.The scope of delivery includes furthermore: 10 m 6x8 mm compressed air tube and assembly materials.Frequency 315 Hz, 132 dB(A) (1 m). Listen to the sound here.
Marco EW2 electronic sound signaling system with pressure chamber loudspeaker.The system is approved for ships < 20 m (IMO Class IV) by RINA, Bureau Veritas, Lloyd's Register and BSH as a sound signaling system ("whistle") in accordance with KVR (COLREG 1972). You will find the relevant certificates at the end of the user manual (see "Downloads").Technical featuresSound frequency 675 HzLoudness 122 dB(A) at 1 mIntegrated ultrasonic preheating of the membrane for improved sound quality at low temperaturesOptionally for 12 V or 24 VDimensions: see photo 2Weight: 3.8 kg listen to the sound here.OperationThe control panel can be used to start fog signals or individual tone sequences (up to eight tones) with a repetition of 60 or 90 secondsThe horn can be activated as required using a separate push button (not included) - with absolute priority, e.g. before a fog signal that has already been startedScope of deliveryWaterproof (IP67), heatable horn (loudspeaker) with bracket for mounting on the mastA factory-fitted, one meter long, tin-plated power cable with a cross-section of 2 x 1.5 mm² is attached to the acoustic horn. To ensure watertightness, the cable gland is sealed (opening the seal will invalidate the warranty). The required cable length to the control unit must be connected to this cableControl unit with sound generator for below-deck installationControl panel for bulkhead mounting5 meter RJ45 cable for connecting the control panel and control unit. Note: The watertight cable gland in the control unit is unfortunately too small for the plug size of this cable and must therefore be adapted. In the control panel, the plug of the cable ensures that the box cannot be closed again. Therefore, use the control panel for bulkhead mounting.
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The signal rhombus can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Measurements: 500 x 800 mmColour: yellow
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The anchor ball / signal ball can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Diameter: 600 mmColour: green
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The signal cone can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Measurements: 600 x 600 mmColour: black
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The signal cylinder can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Measurements: 600 x 1200 mmColour: black
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The signal ball can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Diameter: 600 mmColour: red
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The signal ball can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Diameter: 600 mmColour: yellow
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The signal cylinder can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Measurements: 500 x 800 mmColour: white-black-yellow-black-white
Daytime signal in accordance with the International Regulations for Preventing Collisions at Sea (COLREGs) and the German Inland Waterways Regulations, Binnenschifffahrtsstraßen-Ordnung (BinSchStrO).Brand quality from the Dutch manufacturer Den Haan Rotterdam (DHR), which fulfils the requirements of commercial shipping.The signal rhombus can be folded or collapsed and can therefore be stowed away to save space. Attachment to two swivel mountings or spliced-in fastening hooks.The 6 mm thick, galvanised steel rings are covered with heavy, stitched PVC mesh fabric that offers little wind resistance.Measurements: 500 x 800 mmColour: black
Functional cookies are absolutely necessary for the functionality of the web shop. These cookies assign a unique random ID to your browser so that your unhindered shopping experience can be guaranteed over several page views.
Session:
The session cookie stores your shopping data over several page views and is therefore essential for your personal shopping experience.
CSRF token:
The CSRF token cookie contributes to your security. It strengthens the security of forms against unwanted hacker attacks.
Timezone:
The cookie is used to provide the system with the user's current time zone.
Cookie settings:
The cookie is used to store the cookie settings of the site user over several browser sessions.
Cache handling:
The cookie is used to differentiate the cache for different scenarios and page users.
Information on origin:
The cookie stores the referrer and the first page visited by the user for further use.
Activated cookies:
Saves which cookies have already been accepted by the user for the first time.
CAPTCHA integration
Age check / minimum age:
Check of age for specific catgories and products
PayPal payments
Wishlist
YouTube video
Google Maps:
We use Google Maps to display maps. For this purpose, we integrate an external service from Google, which may access and evaluate personal data. Privacy policy of Google
Youtube / Vimeo:
This cookie is required for playing youtube videos which use cookies.
Matomo Tracking:
Tracking statistics for the optimization of user workflows. No personal data is stored.
language-redirected
Cookie Konfiguration:
Das Cookie speichert, welche Cookies zum Zeitpunkt der Cookie Zustimmung angeboten wurden, damit bei einer Änderung der Cookie-Konfiguration eine erneute Zustimmung eingeholt werden kann.
Cookie-Configuration-Hash
Cloudflare Turnstile (spam protection):
Protects the forms against spam. Loads a script from challenges.cloudflare.com, which processes technical data such as your IP address and browser details.
Stores recently viewed products in the browser (localStorage)
shopwarePayments.cookie.paypal
shopwarePayments.cookie.googlePay
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Enhanced Conversion Tracking
Vimeo video
Service cookies are used to provide the user with additional offers (e.g. live chats) on the website. Information obtained via these service cookies may also be processed for site analysis.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Persistent cart:
Saves the shopping cart of the shop customer across sessions.
Marketing cookies are used to display advertisements on the website in a targeted and individualized manner across multiple page views and browser sessions.
Google Analytics
Morayne:
Enables the optimization of various functions, such as the search in our shop.
Google Advertising
Stored data:
Shopware Analytics adds the following information to your browser's local storage until consent is revoked: _swa_anonymousId (a unique identifier of the visitor), _swa_userTraits (user traits of the visitor).
Google Tag Manager
Google Analytics
Google Ads
Here you can choose which cookies are enabled. You can choose between cookies that are necessary for the operation of the website and additional marketing cookies. If you select all cookies, we will collect data for the analysis and control of advertising campaigns.
Request sent successfully
Request wasn't send - a error occured. Please try again.