The heat exchanger with two ventilators can be connected to the onboard heater or the cooling system of the engine and will heat the cabins with warm air. The device is equipped with an extremely quiet blower motor (48 dB) with very little electricity consumption and has an effective aluminium radiator.The heat exchanger is very easily mounted and can also be fitted in a bulkhead and comes without a switch. Body and cover are made from black plastic. Features:Warm water tube connector: diameter 16 mm, thermal output 5,5 kW max.,air flow rate 250 m?/h,power consumption 1,3 / 0,6 A.
Practical heater, which ensures the circulation of warm air throughout the cabin. The RADEX heat exchanger is attached to the motor's coolant system or a DICKINSON oven. One (type I) or two (type II) fan blowers then circulate the warm air into the cabin with minimal power use (0.74 A per fan). The heating takes place through an internal heat exchanger (copper tubing 19 mm with aluminum plates). In type II the fans can be turned on separately.Air flow per fan is approx. 170 cubic meters per hour.Outer housing of brushed stainless steel.
Heater with which radiant heat from the exhaust pipe system is diverted to other rooms.Instead of a 550 mm stove pipe, HEATEX is used in the pipe system. It consists of a 550mm tube jacketed by a heat exchanger. On the back there is a flange with which DICKINSON pipes or flexible exhaust hoses are connected to the fan. When the fan is switched on, the heat is sucked in through the connecting line and distributed in the room.The scope of delivery includes the heat exchanger, the fan (12 or 24 volts) and a pipe angle.All parts are made of stainless steel.
The heat exchanger with one ventilator can be connected to the onboard heater or the cooling system of the engine and will heat the cabins with warm air. The device is equipped with an extremely quiet blower motor (48 dB) with very little electricity consumption and has an effective aluminium radiator.The heat exchanger is very easily mounted and can also be fitted in a bulkhead. Body and cover are made from black plastic with a rocker switch in the front panel. Features:Warm water tube connector: diameter 16 mm, thermal output 1,7 kW max.,air flow rate 110 m³/h,power consumption 0,6 / 0,3 A.