Construction of classic yachts, fishing boats or traditional sailing ships, needs a wide variety of fastening materials. If a new ship is being constructed or an old historical hull is being traditionally restored, the shipyard or boatbuilding company must have a good stock of boatbuilding nails and boatbuilding screws made of various materials suitable for classic yacht building. Whether it is wood screws made of brass for interior fittings, lag bolts and GRIPFAST nails made of high-strength silicon bronze, hot-dip galvanized boat nails or simple copper pins - …
Screws, nails, rivets & wood plugs
Rivets & roves
Copper boatnails / rivets
From
€59.90 *
Square copper wire nails with flat heads. These nails are used in wooden boat building for nailing or for riveting (in combination with our copper rivet discs). Only available in entire packages of 1 kg.
Copper roves
From
€53.50 *
Typical curved copper roves, as are used to rivet with copper rivets (nails) in classic clinker wooden-boat building. Match our copper boat nails.For matching sizes, please compare under the copper boat nails ("suitable items").Only available in whole packages of 0.5 kg.
Copper boat nails with rose head
From
€62.90 *
Square copper wire nails with raised heads. These nails are used in wooden boat building for nailing and especially for riveting in combination with our copper rivet discs. Only available in entire packages of 1 kg.
Galvanized roves
Galvanized roves
From
€1.43 *
Hot-dip galvanised, bevelled roves, pressed from thick steel plate.Of the type traditionally employed for the permanent riveting of fittings and the tightening of the planks to the frames of the wooden ship.Thickness ca. 4mm.
Nails
Gripfast nails silicon bronze
From
€49.69 *
Boatbuilding nails of high-strength silicon bronze with flat heads. The ring-shaped threads give exceptionally good grip and adhesion in the substructure.Come in packs 450 g each.
Galvanized nails
From
€44.49 *
Shipbuilding nail with strong head.Crude nails of hot-dip galvanized steel.Only available in whole packages.
Copper pins
From
€8.70 *
Cut nails made from pure copper.For nailing leather or sheet metal to masts, spars, oars or superstructures as chafe protection.Supplied either in packs of 100 g or 1 kg.
Bronze screws
Bronze wood screws with slotted countersunk head
From
€0.17 *
Wood screws with countersunk-head, similar to DIN 97. Made from high-strength bronze.This bronze (CuSn) shows very high strength and is highly seawater-resistant.Longitudinal strength: 590 - 790 N/mm.sq.Hint for measurement: The dimensions are nominal sizes, from the DIN, the shaft diameters can be about 10% smaller than the nominal size.We are happy to supply the screws in pieces. You will receive the favourable graduated prices if you order whole packages (content 100 screws), please order a quantity divisible by 100.
Bronze wood screws slotted raised head
From
€0.17 *
Wood screws with raised-head, similar to DIN 95. Made from high-strength bronze.This bronze (CuSn) shows very high strength and is highly seawater-resistant.Longitudinal strength: 590 - 790 N/mm.sq.Hint for measurement: The dimensions are nominal sizes, from the DIN, the shaft diameters can be about 10% smaller than the nominal size. We are happy to supply the screws in pieces. You will receive the favourable graduated prices if you order whole packages (content 100 screws), please order a quantity divisible by 100.
Bronze coach bolts
From
€3.36 *
Carriage bolt with rounded head and square for driving.UNC (unified coarse - american standard) threaded bolt of high-quality, corrosion-resistant silicon bronze. The best prices can be achieved by ordering entire packages - please order in numbersthat conform to package sizes.
Bronze washers
From
€0.40 *
Washers of high-strength corrosion-resistant silicone bronze. Suitable for our UNC nuts and bolts.
Bronze hexagonal nuts
From
€0.60 *
Bronze hexagonal nuts, made from high-strength corrosion-resistant silicone bronze.American standard threads UNC (unified coarse).
Bronze countersunk head screws UNC or No. thread
From
€0.64 *
Bronze flathead countersunk screws, UNC or No. threaded.Made from high-strength corrosion-resistant silicone bronze. Long threads.American standard threads UNC (unified coarse) or No.Matching bronze washers and hexagonal nuts are available separately.The prices are per piece. We also offer volume prices for these items. Volume prices are always for a complete pack. Please check pack size (pcs/pkt) in the list below and order a quantity which can come in complete packs.
Bronze lag bolts with hexagonal head
From
€13.70 *
Lag bolts with hexagonal head and wooden thread, made of high-strength, corrosion-resistant silicon bronze (CuSi).Prices are per piece. You will get favorable graduated prices when ordering whole packages. In a package are 25 screws, please order then a number of pieces divisible by 25.
Brass screws
Wood screws countersunk head, brass
From
€0.10 *
Countersunk brass slotted screws (DIN 97). Manufactured to high-quality standards in Germany. You can order these screws by the piece or in packages of 100. Please order in amounts divisible by 100, in order to get the best price.
Wood screws countersunk head, nickel plated brass
From
€0.11 *
Countersunk slotted brass screws (DIN 97).The surface is nickel plated Manufactured to high-quality standards in Germany. You can order these screws by the piece or in packages of 100. Please order in amounts divisible by 100, in order to get the best price.
Rod, threaded & plain
Bronze rod
From
€75.01 *
Rod of high-strength silicone bronze (CuSi), seawater-proof.Smooth drawn, without thread. Length: 3 foot (915 mm).
Bronze UNC threaded rod
From
€50.00 *
Threaded rods of high-strength silicone bronze (CuSi), seawater-proof.With standard UNC (unified coarse) threads.Length: 3 foot (900 mm).
Threaded Rod from stainless steel 330mm
From
€8.90 *
V4A (AISI 316) stainless steel threaded rod.Available in lengths á 330 mm.
Threaded rod stainless steel 1000 mm
From
€13.49 *
V4A (AISI 316) stainless steel threaded rod.Available in length á 1000 mm.
Bolts & screws with eye or ring
Eye bolt WICHARD stainless steel
From
€16.01 *
WICHARD eyebolts. Forged quality.Made from V4A stainless steel.
Stainless steel eye bolt long thread
From
€9.35 *
Eye screw made from V4A stainless steel. Conforms to DIN 444/LBM (long thread).
Eye bolt stainless steel with collar
From
€8.40 *
Eyebolt with metric threads, with large collar.Welded V4A stainless steel.
Shackle bolt fitting DAVEY
From
€46.51 *
Cambered shackle made from high tensile manganese bronze with strong through deck bolt.
Eye bolt stainless steel
From
€5.00 *
Eyebolts with metric threads.Polished V4A (AISI 316) stainless steel.Inexpensive design.
Brass eye bolt thread to the head
From
€6.40 *
Metric eyebolt with full-length thread made from rolled brass.Well suited for porthole fasteners, for example.According to DIN 444/LBM (thread up to the head).
Eye Screw stainless steel
From
€3.30 *
Ring bolt, stainless steel V4A (AISI316) metric thread, similar to DIN 580.
Brass eye bolt short thread
From
€6.40 *
Metric eyebolt made from rolled brass with partial thread.Well suited for porthole fasteners, for example.In accordance with DIN 444/BM (short thread).
Brass eyebolt rolled or chromed
From
€6.40 *
Brass eyebolt with collar. Rolled or chromed surface.Stainless threads, comes without nut.
Brass eye bolt
From
€12.40 *
Robust brass eyebolt. Large base with pronged mounting plate (to keep it from twisting).Polished or chromed finish.Comes with nut.
Brass ring bolt
From
€15.60 *
Eyebolt and soldered ring, with collar and rounded eye.Rolled brass.Comes with nut and washer.
Brass ring bolt polished
From
€13.99 *
Eyebolt with soldered ring, with collar and spherical head.Polished brass.Comes with nut and washer.
Brass ring bolt chromed
From
€14.40 *
Eyebolt with soldered ring, with collar and spherical head.Chromed brass.Comes with nut and washer.
Galvanized ring bolt
Price on request
Eyebolt with loose, welded ring and collar.Inch threaded, comes with nut.Hot-dip galvanized steel.
Galvanized ring screw
From
€7.54 *
Eye screw with threads for wood. With loose, welded ring.With collar.Made from hot-dip galvanized steel.
Ring bolts from stainless steel
From
€3.80 *
Stainless stell ring bolt with loose ring and without collar. DIN threaded, comes with nut.
Brass eye bolt rolled or chromed
From
€9.50 *
Brass eyebolt with collar.Rolled-brass or chromed finish.Comes with nut and washer.
Eye screw galvanized
From
€5.00 *
Eye screw with screw threads, for wood.With collar.Made from hot-dip galvanized steel.
Eye screw stainless steel for wood
From
€4.15 *
Eye screw with threads for wood.Made from polished V4A (AISI 316) stainless steel.
Wing nuts & eye nuts
Brass toggle nut short
From
€13.45 *
Toggle nuts made from brass following DIN 80701 with short handles.Surface tumbled.
Stainless steel toggle nut short
From
€13.49 *
Toggle nut made from stainless steel similar to DIN 80701 in a short version.
Brass ring nut
From
€4.40 *
Brass ring nut, rolled or chromed finish.Round.Available with through-drilled threads or with blind hole.
Eye nut WICHARD stainless steel
From
€12.70 *
WICHARD ring nut, forged quality. Metric threads.Made from polished V4A (AISI 316L) stainless steel.
Brass eye nut rolled or chromed
From
€7.50 *
Brass ring nut, rolled or chromed finish.Oval.Through-drilled.
Stainless steel bow nut
From
€12.50 *
Bow nut.Metric (for example for closing ports). Made from investment-cast A4 stainless steel.
Ring nut brass
From
€15.20 *
Brass ring nut according to DIN582, rolled or chromed finish.Round with through-drilled thread.
Brass toggle nut long
From
€27.16 *
Toggle nut made from brass according to DIN 80701 in a long version.Drummed surface.
Single sided brass toggle nut
From
€16.95 *
Toggle nut made from brass according to DIN 80701 in a single handle version.Drummed surface.
Stainless steel toggle nut long
From
€23.70 *
Toggle nut made from stainless steel according to DIN 80701 in a long version.
Bronze Ring Nut DAVEY
From
€32.20 *
Heavy, polished bronze ring nut with metric blind bore, manufactured in the sand casting process by the traditional manufacturer DAVEY from London. Visually a full ring with base, this makes the fitting look more traditional in design and pleasantly stands out from conventional ring nuts in terms of appearance. In addition, the casting process gives the surface a lively appearance.
Wood plugs
Mahogany Wood Plugs
From
€0.40 *
Cleanly drilled wood plug of mahogany wood.Cylindrical straight sided. These plugs are used to close screw holes in wooden decks, floors and wooden joinery.The reduced graduated price applies for packs of 100 pieces. To buy for this price, please order 100, 200, 300 etc. pieces.
Plugs teak, cylindrical
From
€0.15 *
Cleanly drilled wood plug of teak wood, not varnished.Cylindrical straight plugs are used to close screw holes in wooden decks, floors or in wooden joinery. The reduced graduated prices apply for packs of 100 pieces. To buy for this price, please order 100, 200, 300 etc. pieces.
Sleeve bolts
Sleeve bolts for door plates M4
From
€4.50 *
Brass sleeve bolts for our "small yacht locks" and for our "yacht locks."Available with polished or chromed surface.