Mooring lines, halyards and sheets need to be fastened. For attaching the spring lines, bowlines and stern lines, on the deck of sailing ships, you can find mooring bollards in many different designs. Onboard, it is important that lines can be slipped in a controlled way. Ashore, on the pier, dock or jetty you also need bollards and mooring rings for rigging the lines. We stock sturdy traditional cross bollards, cross head bollards or raked bollards made of bronze, cast bronze and brass. We also have stainless steel and galvanized steel bollards for welding or bolting. Classic, sturdy mooring cleats are popular in yachting, while other types of cleats are very common with dinghies and classic yachts for attaching the running rigging. We offer wooden or stainless steel cleats, as well as cleats made of Tufnol, aluminium or nylon. Similar to cleats, on many traditional ships, our belaying pins are used to secure halyards and trim-lines.
- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Cleats, bollards & rings
Beautiful base made of hand-polished cast bronze, robust heavy fitting for bar cleats or hand-rails. The oval bar must be finished individually (ideally matched exactly to the fitting, because slight dimension variations are possible in the oval piece). Screws in with 4 screws or bolts, D = 5 mm (sold separately). Come in single pieces, for one cleat, two pieces are required. Comes without the bar.
Cleanly finished, classic wooden cleat with two holes.Made from varnished ash.
Cleanly worked, classic wooden cleats with two mounting holes.Teak, sanded and unoiled.
Cleanly crafted, classic wooden cleat with two holes.Made from the teak-like thermowood KEBONY CLEAR, cleanly sanded and unoiled.Properties of Kebonyhigh durability dimensionally stable (barely any shrinkage/swelling)high resistance to rot, mold, insectsnatural wood look. Initially a chocolate-like brown tone, after approx. one year weathered silver-grey like teakif the wood is sanded, sawn or planed (all possible without any problems), the original brown color appears againlow maintenance: sufficiently maintained with salt water or with lubricating or green soaptreatment with varnish or (teak) oil is possiblefully recyclable or can be disposed of like "usual" wood
Scandinavian cleat in classic form with round wooden pole made of kebony and brass feet with a choice of polished or chrome-plated finish. With M10 fixing bolt, length 45 mm.Can be used universally as the pole and fittings are supplied loose. Spare poles are available as accessories.
Thin cleat, similar to classic Herreshoff cleats.Tapered top with straight, oval profile.Polished brass.
Pfeiffer Marine cleat made of aluminium, silver anodised. Classic mooring cleat / mooring cleat used on many yachts. Available in various sizes. The cleat is mounted from above with countersunk screws through two mounting holes. lternatively, this cleat shape is also available for mounting with four screws through the two bases (feet) - see "Similar products".
Classic cleat in a narrow design with an elegant, rounded base plate and two predrilled holes for mounting.Made of solid cast bronze, hand-polished.
Straight small cleat, made from cast stainless steel (AISI 316), polished.Square mounting foot with two mounting holes.
Very useful and beautiful cleats that can be mounted to the coaming. Cast of marine bronze, with a tumbled matte finish.The cleats are ready to mount and come complete with backing plate and countersunk bolts (UNC-threaded 1/4-inch, Bronze). Coaming thickness (with the included bolts) max. 30 mm. Available in two sizes, the larger cleat has a triangular backing plate.A quality product of the American manufacturer SPARTAN.
Bar cleat with round teak bar. This cleat is universally mountable, because the bar and stands come separate. Holes are provided for additional fastening of the pole in the feet (screws are not supplied). Available in polished or chromed brass with teak bar. Delivery with mountingbolts M10.Replacement parts are available.
Beautifully rounded cleat, with functional mounting base.Made from highly polished stainless steel.
The classic cleat for the quick securing and releasing of sheets on small boats. Made from hand-polished massive cast bronze.
This classic American bronze deck cleat was designed by the famous builder Nat Herreshoff and has proven itself aboard American sailing boats for over 100 years.The American manufacturer SPARTAN casts these very strong cleats from dark burnished matte bronze. The size of the countersunk holes is relative to the size of the cleat. Long, round bridge with fitted profile.Two ropes can be fixed to this cleat simultaneously.
Elegant and functional stainless steel retracting cleat.When retracted, this strong folding cleat lies flat on the deck: thus it can't snag lines or trip crewmembers. Massive cast stainless steel, hand-polished.Built-in plastic rings prevent rattling and hold the cleat open - a recess allows quick opening.Comes with mounting bolts, nuts and washers.Length of the Bolts:1324-115: 43 mm 1324-165: 45 mm1324-210: 50 mm
Hot-dip galvanized cast iron (gunmetal) horn cleat.Comes complete with two machine screws made from A2 stainless steel with nuts and washers.The bolt heads are countersunk into the cleat body.
Flat, delicate and still robust clamp cleat made of bronze with fine matt tumbled surface. The cleat is suitable for 4 to 6 mm thick rope and can also be used as a fairlead.A drilled base plate to protect the surface under the cleat can be ordered separately.
Elegant and functional stainless steel retracting cleat.When retracted, this strong folding cleat lies flat on the deck: thus it can't snag lines or trip crewmembers. Massive cast stainless steel, hand-polished.Built-in plastic rings prevent rattling and hold the cleat open - a recess allows quick opening.Comes with mounting bolts, nuts and washers.Length of the Bolts:1324-115: 43 mm 1324-165: 45 mm1324-210: 50 mm
Strong retractable cleat made of A4 stainless steel (AISI 316), polished.Slim, shapely cleat that forms an elegant streamlined body when folded.Fastening via M22 stud bolts.Watertight only after appropriate sealing on board.
Solid aluminum fold-down cleat. Smooth form with lightly rounded top. When retracted, this cleat lies flat on the deck, without any protrusions or edges. Ideal for use as spring-line cleats. The countersunk fastener holes in the mounting plate are appropriate for use with machine screws M10. These cleats also make excellent handles.
A refined design of the folding cleat: The two arms are geared together.When open, this is a strong spring-line cleat - when folded, lines can not get hooked!Cast bronze, surface polished.
Cast brass retractable cleat, polished or chrome finish.A very practical cleat that is installed completely flat into the deck. Two spring-loaded balls on the side hold the cleat in position when it's pulled up. Two lids with O-ring seal can be used to drain water that accumulates from above on the substructure.This retractable cleat is very suitable as a midship spring cleat.
Sturdy retractable cleat made of A4 stainless steel (AISI 316), polished.Slim, attractive cleat that forms an elegant, streamlined body when folded.Attached using M10 stud bolts. Locked by spring balls in the shaft.Waterproof only after appropriate sealing on board.
Strong flagline cleat. Heavy, high-quality construction from polished bronze with round mounting plate.
tumbled brass with matt finish, for fitting to the shroud with 4 screws.
Robust, aesthetically pleasing mooring bitt with cross piece made from polished stainless steel casting (AISI 316). The ground plate comes with boreholes and clean countersinks for mounting.
Functional polished stainless steel mooring bitt with cleanly welded end-to-end cross piece.Comes with a drilled mounting plate.
These heavy mooring bitts are cast from high-tensile bronze in a traditional casting mold in England then hand-polished.Massive body with strong cleat.A functional piece of art on any foredeck.
Solid, massive bollard with strong bars and beautiful knobs, made of hand-polished cast bronze.The mounting plate is drilled.
Heavy bollard with slightly angled arms.Made from cast brass, polished or chromed finish.The bollard is attached invisibly from underneath.Comes complete with two stainless steel stud bolts and nuts that are securely screwed into blind holes.
Brass bollard cleat, polished or chromed finish.With flat, round mounting plate.A central M12 countersunk hole has been drilled for mounting.Mounting-plate diameter 65 mm, weight 360 g.
Functional polished stainless steel mooring bitt to be welded on.With cleanly welded end-to-end cross piece.Ready to weld-on bollard without mounting plate.
Double-cross bollard with rounded edges.Solid design made of polished stainless steel.
Heavy solid deck bollard (double cross) from the British traditional manufacturer DAVEY of London. Made of seawater-resistant cast bronze, cleanly hand-polished. Base plate drilled with holes for countersunk screws of 1/4" or 6 mm (both fit).
Heavy bollard cast from a traditional British pattern.Made from galvanized cast iron.
Functional cast-brass bollards with angled arms.Polished or chromed finish. Threaded holes in the mounting plate.Comes with 80 mm stainless steel bolts.
Heavy classic bollard:This original, based on the cast models of the 1920s is a piece of art on any deck.Made of hand-polished bronze. Massive mounting plate, drilled. With angled arms.
Heavy classic bollard with straight arms:This original fitting, based on the cast models of the 1920s is a piece of art on any deck.Made of heavy cast bronze, hand-polished. Massive mounting plate, drilled. With straight arms.
Heavy bollard cast from a traditional British pattern.Made from solid hand-polished cast bronze.
Classic massive bollard with knobbed ends.A noble no-nonsense fitting that has been cast by hand in this tradition for almost a century.Made from hand-polished cast bronze.
Welded ring made from stainless steel A4 on a ground plate with 8 mm counter sunk drillings.
Functional-quality eye plate, with welded-on eye and welded ring.Made from hot-dip galvanized steel.
