The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Warning: The given rope diameter (D1) is only good for very supple, braided rope. For stiff or laid rope, choose larger blocks or blocks from the heavier series (Art.-Nr. 1122-....).Available with or without becket (Hdf in the drawing).
The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Warning: The given rope diameter (D1) is only good for very supple, braided rope. For stiff or laid rope, choose larger blocks or blocks from the heavier series (Art.-Nr. 1122-....).Available with or without becket (Hdf in the drawing).
Turning block that mounts using screws on its side. Made from TUFNOL laminated cloth with stainless steel fitting. This block is exceptionally well suited for use as a return pulley for reefing lines on the boom.The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).
TUFNOL block with mounting plate and swivel. A strong spring holds the block upright on deck.The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).
Heavy duty single sheave TUFNOL blocks. Made from seawater resistant plastic resin with inside fittings made from stainless steel. This special design guarantees a particularly high breaking load. The blocks are maintenance free and known for particular longevity. The Tufnol sheaves are equipped with brass bearings, keeping wear and friction very low. Also the diameter (D) of the sheaves of these blocks are much larger relative to the specified rope diameter (D1) than with standard blocks. This makes the blocks turn better and makes them in particular suited for 3-stranded cordage and rigid ropes.The high breaking load are tested by the Germanic Lloyd (GL). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Available with or without becket.
Two-sheave fiddle block with swivel, becket and cam cleat.The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Warning: Because the bottom sheave has a very small diameter, fiddle blocks are only intended for very supple, braided line. The given rope diameters (D1) are maximum diameters. The blocks spin more easily with thinner rope.
The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Warning: The given rope diameter (D1) is only good for very supple, braided rope. For stiff or laid rope, choose larger blocks or blocks from the heavier series (Art.-Nr. 1122-....).Available with or without becket (Hdf in the drawing).
The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Warning: The given rope diameter (D1) is only good for very supple, braided rope. For stiff or laid rope, choose larger blocks or blocks from the heavier series (Art.-Nr. 1122-....).Available with or without becket (Hdf in the drawing).
The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Warning: The given rope diameter (D1) is only good for very supple, braided rope. For stiff or laid rope, choose larger blocks or blocks from the heavier series (Art.-Nr. 1122-....).Available with or without becket (Hdf in the drawing).
Two-sheaved fiddle block, with fixed bracket. Built of saltwater-proof hardened "tufnol" fabric, with fittings made of stainless-steel. These blocks are maintenance-free and known for their long lives. The sheaves are finished with brass bearings, greatly reducing wear and friction. These blocks are particularly good for classic yachts of the 50s and 60s and are ideally suited for universal working blocks.The high breaking loads have been tested by Germanischen Lloyd (GL). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Beware: Because the lower sheave has a very small diameter, violin blocks are intended only for very thin ropes.The given rope diameters (D1) are maximum diameters, with thinner ropes working better.
Two-sheave or three-sheave Tufnol block with swivel and integrated cam cleat.The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Warning: Because the bottom sheave has a very small diameter, fiddle blocks are only intended for very supple, braided line. The given rope diameters (D1) are maximum diameters. The blocks spin more easily with thinner rope.
The TUFNOL block has become a classic over the years. Made from seawater-resistant laminated corse fibers with stainless steel fittings. These blocks are maintenance-free and known to be exceptionally long-lived. The TUFNOL sheaves have brass bearings, through which wear and friction are kept very low. These blocks fit exceptionally well aboard classic yachts from the 1950s and 60s and are also ideal as universal blocks.The high breaking strengths have been tested by Germanisher Lloyd (GR). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Warning: The given rope diameter (D1) is only good for very supple, braided rope. For stiff or laid rope, choose larger blocks or blocks from the heavier series (Art.-Nr. 1122-....).
Heavy duty single sheave TUFNOL blocks. Made from seawater resistant plastic resin with inside fittings made from stainless steel. This special design guarantees a particularly high breaking load. The blocks are maintenance free and known for particular longevity. The Tufnol sheaves are equipped with brass bearings, keeping wear and friction very low. Also the diameter (D) of the sheaves of these blocks are much larger relative to the specified rope diameter (D1) than with standard blocks. This makes the blocks turn better and makes them in particular suited for 3-stranded cordage and rigid ropes.The high breaking load are tested by the Germanic Lloyd (GL). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Available with or without becket.
Heavy duty single sheave TUFNOL blocks with swivel. Made from seawater resistant plastic resin with inside fittings made from stainless steel. This special design guarantees a particularly high breaking load. The blocks are maintenance free and known for particular longevity. The Tufnol sheaves are equipped with brass bearings, keeping wear and friction very low. Also the diameter (D) of the sheaves of these blocks are much larger relative to the specified rope diameter (D1) than with standard blocks. This makes the blocks turn better and makes them in particular suited for 3-stranded cordage and rigid ropes.The high breaking load are tested by the Germanic Lloyd (GL). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Available with or without becket.
Two-sheaved fiddle block, with swivel. Built of saltwater-proof hardened "tufnol" fabric, with fittings made of stainless-steel. These blocks are maintenance-free and known for their long lives. The sheaves are finished with brass bearings, greatly reducing wear and friction. These blocks are particularly good for classic yachts of the 50s and 60s and are ideally suited for universal working blocks.The high breaking loads have been tested by Germanischen Lloyd (GL). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).Beware: Because the lower sheave has a very small diameter, violin blocks are intended only for very thin ropes.The given rope diameters (D1) are maximum diameters, with thinner ropes working better.
Light Tufnol wire block, with fixed eye.The blocks have a very small diameter in proportion to the wire and are therefore intended for light loads or for redirections at obtuse angles only.These blocks are maintenance-free and known for their long lives. The sheaves are finished with brass bearings, greatly reducing wear and friction.The high breaking loads have been tested by Germanischen Lloyd (GL). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).These blocks are particularly good for classic yachts of the 50s and 60s.
Single-sheave design, made from Tufnol, with large sheave diameter. These blocks are maintenance-free and known for their long lives. The sheaves are finished with brass bearings, greatly reducing wear and friction. They are particularly well suited for backstay purchase systems.The high breaking loads have been tested by Germanischen Lloyd (GL). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).These blocks are particularly good for classic yachts of the 50s and 60s.