- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
-
Pumps & sanitation
- Toilets
- Sinks & water taps
- Water purifying
- Boiler
- Hoses & pipes
- Tanks
- Deck fills & waste pump out fittings
- Thru hulls, valves & fittings
- Draining plugs & cockpit drains
- Pumps
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Fittings, hose nozzles & connectors
Bronze pipe-to-hose fitting with external thread and hexagon. Available for different hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
90° angle with inner and outer threads. High quality fitting made from seawater-resistant bronze alloy. The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!
Connector, outer threads on both sides. Bronze. Thread sizes are the nominal size (BSP) and do not indicate the thread diameter.
T-piece, inner threads.High quality seawater-proof bronze fitting.The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!
Sleeve, inner thread/inner thread.High quality seawater-proof bronze fittings.The nominal sizes are thread sizes (BSP) and do not indicate the thread diameters!
45° angle with inner and outer threads. High quality seawater-resistant bronze fitting. The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!
90° angle with inner threads. High quality seawater-proof bronze fitting. The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!
Seawater-resistant bronze sealing plug with exterior threads.The nominal sizes are thread sizes (BSP) and do not indicate the thread diameters!
Seawater-proof bronze reducers.BSP inner and outer threads (thread sizes are the nominal sizes, not the diameter).
Seawater-proof bronze reducers. BSP outer threads on both ends (thread sizes are the nominal sizes, not the diameter).
Bronze pipe-to-hose fitting with internal thread and hexagon. Available for different hose diameters.Type approval:RINA ISO 9093:2020LLOYD’S REGISTERThread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Saltwater-proof bronze end cap.With internal threads (BSP). The nominal sizes are thread sizes (BSP) and do not indicate the thread diameters!
Cleanly machined hose nozzle made of stainless steel (seawater and acid-resistant, A4, 1.4401 = AISI 316). Thread type: BSPThread form: cylindrical or parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Cleanly machined stainless steel pipe-to-hose fitting with internal thread and hexagonal wrench attachment (seawater and acid-resistant, A4, 1.4401 = AISI 316). Thread type: BSPThread form:Â parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Cleanly worked stainless steel knee, 90 degrees.Stainless steel A4, 1.4401 = AISI 316).The given thread size in BSP is the nominal size and does not correspond to the thread diameter.
Cleanly worked stainless steel sleeve.Stainless steel A4, 1.4401 = AISI 316).The given thread size in BSP is the nominal size and does not correspond to the thread diameter.
Cleanly worked stainless steel connector.Stainless steel, A4, 1.4401 = AISI 316).The given thread size in BSP is the nominal size and does not correspond to the thread diameter.
Cleanly worked stainless steel T-piece. Stainless steel A4, 1.4401 = AISI 316).The given thread size in BSP is the nominal size and does not correspond to the thread diameter.
Cleanly worked stainless steel knee, 45° angle. Stainless steel A4, 1.4401 = AISI 316.The given thread size in BSP is the nominal size and does not correspond to the thread diameter.
Cleanly worked stainless steel reducer.Stainless steel A4, 1.4401 = AISI 316).The given thread size in BSP is the nominal size and does not correspond to the thread diameter.
Cleanly worked stainless steel blind plug.Stainöless steel A4, 1.4401 = AISI 316).The given thread size in BSP is the nominal size and does not correspond to the thread diameter.
90° elbow hose nozzle made of brass, with external thread and hexagon for screwing in. For various hose diameters.Thread type: BSPThread form: cylindrical or parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Brass pipe-to-hose fitting with external thread and hexagon. Available for different hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes and do not indicate the thread diameter.
Brass pipe-to-hose fitting with internal thread and hexagon.Available for different hose diameters. Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
45° elbow pipe-to-hose fitting made of brass, with external thread and attachment for screwing in. Available for various hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Brass reducers. BSP outer threads on both ends (thread sizes are the nominal sizes, not the diameter).
Connector, outer threads BSP on both sides. Made from brass.Thread sizes are the nominal size (BSP) and do not indicate the thread diameter.
90° angle with inner and outer threads. High quality brass fitting. The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!
90° angle with inner threads. High quality brass fitting. The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!
Bronze reducers.BSP inner and outer threads.The thread sizes are the nominal sizes and not the diameter.
90° angle with inner and outer threads. High quality brass fitting. The nominal sizes are the thread sizes (BSP) and do not indicate the thread diameter!
Brass sealing plug with exterior threads.The nominal sizes are thread sizes (BSP) and do not indicate the thread diameters!
Sleeve, inner thread/inner thread.High quality brass fittings.The nominal sizes are thread sizes (BSP) and do not indicate the thread diameters!
Brass end cap. With internal threads (BSP). The nominal sizes are thread sizes (BSP) and do not indicate the thread diameters!
45° elbow pipe-to-hose fitting made of brass, with internal thread and attachment for screwing in. For various hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Reduction fitting for attaching hoses of various diameters.The fitting can be cut for connection from the largest to smallest diameters.Safe operating temperature: max. 80°C (176 °F)
Outer thread BSP, hexagonal, colour black. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide. The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).
Attachment piece for hoses of varied diameters.Plastic.
Outer thread BSP, hexagonal, colour black, 90° angled fitting. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).
The 1½" Threaded T-Piece features 2x internal threads and 1x external thread enabling them to be joined together to create manifolds - useful for multiple hose connections to a single ball valve & thru-hull fitting.The centre female thread is shorter and designed for use with AQUAVALVE tails giving the option of tail sizes from 19mm up to 38mm. NOTE: all AQUAVALVE tails that are used with the T-piece do not face-seal using the Red or Blue washer as they do when used in Aquavalves. Instead, use a suitable thread sealant or PTFE tape to seal threads. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).
TRUDESIGN AQUAVALVE tails for hose attachment with 1 1/2" BSP thread. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).
Plastic fitting to connect hoses of equal diameters.
Robust TRUDESIGN hose clamps with clamping jaws made of impact-resistant and tough nylon 6 material and pull screws made of stainless steel 316. The width of the design prevents deep cuts and damage to the hose material. Compared to simple metal hose clamps, this type of clamp reduces the risk of injury during maintenance work on the hose system, as there are no sharp edges or protrusions.
Inner thread BSP, hexagonal, colour black, 90° angled fitting. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).
Strong 90° elbow hose connector for hoses of the same diameter. Useful if the installation situation requires a tight installation radius of the hose section. This allows hose to be securely routed next to bulkheads and walls.Available for various hose sizes in black or white.TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide. The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive.
Outer thread BSP, hexagonal, colour black, 120° angled fitting. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).
Straight hose nozzle of gray or white plastic, with outer threads.
Strong Y-connectors made of thick-walled, resilient plastic that enable the flow of two hoses to be combined smoothly. For connecting hoses of the same and different diameters.Available for different hose diameters, in white colour.TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide. The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive.
Connectors specially made for water cooled exhaust pipes made from PVC.Also well suited to connect already existing and sound hoses with new exhaust components.Available straight and 60° angular.
90° connector with female-male thread BSP.This fitting enables a space-saving installation.Colour: black. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel. Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).
MARELON hose connector.Black.Straight design.American NPT threads, not compatible with standard BSP threads. *** MARELON fittings ***: Made in the USA of high strength, fiberglass-reinforced special plastic. MARELON is absolutely resistant to galvanic corrosion and thus exceptionally well suited for aluminum and steel hulls.MARELON is resistant to oil, diesel, waste, and saltwater. U.L. and A.B.Y.C. certified. Temperature range -40ÃC to +80ÃC. Beware: American NPT threads are not compatible with standard BSP threads!
Bent hose nozzle of gray plastic with exterior threads.
Black hose nozzle with female BSP thread made of composite plastic.TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide. The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel.Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).
Plastic connector for tubes with identical diameters. The 90° elbow hose connector enables clean, parallel hose routing, e.g. in corners and narrow areas on board.
Plastic fitting to connect hoses of equal diameters.
