Toilets

A classic in the world of marine toilets.Large porcelain bowl, plastic seat and cover.The large hand pump, as well as the solid, smooth-surfaced pump base are made of saltwater-resistant brass;screws, pistons, and valve are made of stainless steel.Inlet 19 mm, outlet 38 mm.The heavy design and the large pumps for fresh and waste water guarantee functional safety and ease of use; well suited for working and charter boats.Available in two designs: classic bronze-looking fittings with uncoated fittings (as picture) or fittings coated with white Rilsan coating.Made in Germany.

Made by JABSCO, the largest worldwide manufacturer of small onboard toilets -  the standard on many production boats!Model COMFORT with large porcelain bowl and seat of normal household standard. Seat and cover are made from wood with white stoved enamel coating.Easy to use, double-acting hand pump with simple to replace parts. The TWIST'N'LOCK safety system prevents the siphon effect by a simple 90° turn of the pump handle. The pump can be moved to the left side.Inlet 3/4", outlet 1 1/2".Also available or possible to retrofit with electric rinse, macerator and drain pump for 12 or 24 volt systems.

The LAVAC POPULAR is a tried and tested marine toilet from the range of the British manufacturer BLAKES.LAVAC toilets have been in production since 1963 and are very easy to use due to the completely simple vacuum system:The seat and cover seal hermetically (with a surrounding lip seal), so that when water is pumped out, new water is automatically pulled in by the vacuum.Included is a robust and easy to clean HENDERSON/WHALE membrane pump, that can also be used as a bilge pump or to empty the holding tank.The pump is intended for installation on the bulkhead or the floor.Toilet installation requires little space.Bowl of white porcelain, seat and cover of plastic, all metal pieces of stainless steel.Inlet hose fitting 19 mm, outflow - hose attachment 38 mm.

The RHEINSTROM Yacht-WC Y3 is characterized by the highest quality materials, a very low-wear technology and a low weight.The coated aluminum profile cylinder with a pump piston made of Delrin in combination with a PTFE piston seal ensures a permanently smooth pump operation. The mechanical guidance of the traditional RHEINSTROM pump lever ensures that pumping takes place with little effort and prevents the piston from jamming in the cylinder. Due to its compact dimensions, this toilet can be easily replaced almost anywhere with existing standard toilets.The on-board toilet has a large bowl made of porcelain. The seat and lid are made of plastic. All screws, the piston rod and the valve spindle are made of stainless steel.The inlet has a 19 mm connection, the outlet 38 mm.

Made by JABSCO, the largest worldwide manufacturer of small onboard toilets - standard on many production boats!Model COMPACT with small porcelain bowl in standard yacht size. Seat and cover are made from wood with white stoved enamel coating. Easy to use, double-acting hand pump with simple to replace parts. The TWIST'N'LOCK safety system prevents the siphon effect by a simple 90° turn of the pump handle. The pump can be moved to the left side.Inlet 3/4", outlet 1 1/2".Also available or possible to retrofit with electric rinse, macerator and drain pump for 12 or 24 volt systems.

The LAVAC POPULAR is a tried and tested marine toilet from the range of the British manufacturer BLAKES.LAVAC toilets have been in production since 1963 and are very easy to use due to the completely simple vacuum system:The seat and cover seal hermetically (with a surrounding lip seal), so that when water is pumped out, new water is automatically sucked in by the vacuum.Included is a robust and easy to clean LAVAC membrane pump, which can also be used as a bilgepump or to empty the holding tank.Comes without pump, requires a capable manual or electric vacuum pump.Bowl of white porcelain, top of plastic, all metal pieces of stainless steel.Intake-hose attachment 19 mm, outflow-hose attachment 38 mm.

The LAVAC POPULAR is a tried and tested marine toilet from the range of the British manufacturer BLAKES.LAVAC toilets have been in production since 1963 and are very easy to use due to the completely simple vacuum system:The seat and cover seal hermetically (with a surrounding lip seal), so that when water is pumped out, new water is automatically sucked in by the vacuum.Included is a robust and easy to clean LAVAC membrane pump, which can also be used as a bilgepump or to empty the holding tank.The pump is intended for installation behind the bulkhead.Because the pump can be mounted anywhere, the toilet installation requires little space.Bowl of white porcelain, top of plastic, all metal pieces of stainless steel.Intake-hose attachment 19 mm, outflow-hose attachment 38 mm.

The real classic under the yacht toilets, renowned worldwide for its reliable system, quality build and comfort.First designed in the late Victorian aera for classic racing yachts, this toilet is still one of the best classics. All metal parts are made from seawater-resistant bronze or brass. Mountings and fittings are chrome plated. The surface of pump and pipes is coated white.The bowl is made from white ceramics, seat and cover are from protected wood, matte white design.Separate pumping systems for clean and waste water (3/4" hose attachment) reduce odor and allow reduced rinse water use (good if you have a small blackwater holding tank). Available with right or left pump (as seen from the front).This toilet is now also available, on customer's request, with coloured bowl in a wide range of colours. Please check "Suitable Items" and contact us. We will be happy to support you.

Now available in all colours! The real classic under the yacht toilets, renowned worldwide for its reliable system, quality build and comfort.First designed in the late Victorian aera for classic racing yachts, this toilet now comes, on customer's request, in any colour. Also words or logos may be engraved in the toilet bowl. Seat and cover may come in classic white or, on special request, in a wide variety of wood designe. Materials: All metal parts are made from seawater-resistant bronze or brass. Mountings and fittings are chrome plated. The surface of pump and pipes is coated in the same colour as the bowl. The bowl is made from high grade ceramics, seat and cover are from protected wood, matte white or wood design veneer. Separate pumping systems for clean and waste water (3/4" hose attachment) reduce odor and allow reduced rinse water use (good if you have a small black water holding tank). Available with right or left pump (as seen from the front). Please send us your special requests for colour and design under "Comments applying to this order" as you proceed in the order process. Or contact us in advance. We will be happy to support you.

Small pump toilet from JOHNSON.Delivery as type COMPAKT with a small porcelain bowl in yacht standard.The seat and lid are made of durable plastic and have a soft-closing mechanism.Easily operated, double-acting hand pump with easily replaceable wear parts. The pump can be converted to the left.Inlet 19 mm, outlet 38 mm.

Large pump toilet from JOHNSON.Delivery as type COMFORT with a larger porcelain bowl in yacht standard.The seat and lid are made of durable plastic and have a soft-closing mechanism.Easily operated, double-acting hand pump with easily replaceable wear parts. The pump can be converted to the left.Inlet 19 mm, outlet 38 mm.

Developed over 15 years ago in America by cruising sailors for yachts and tested worldwide: the NATURE`S HEAD separation toilet sets new standards in the installation, maintenance and operation of toilets on boats, in motor homes or Tiny Houses.Neither water connections, board outlets nor separate holding tanks are required for your use. It impresses with its robust, trouble-free construction in combination with the simple installation and the almost maintenance-free operation.The principle of operation: a simple mechanism separates solid and liquid components in the toilet. The urine is then discharged into an integrated canister (8-liter capacity), which remains leak-proof even in heavy seas and can be emptied outboard if necessary. The solids are mixed with coconut fibers in another container, these initiate the composting process and accelerate the drying of the substrate. A small, quiet 12V fan (60mA) provides air circulation and prevents condensation inside the toilet. The capacity is up to 80 toilet cycles, conventional toilet paper can be used.The dried compost does not smell and can be disposed of easily in the next harbour, even on the home compost heap. Cleaning after use is done with a spray bottle of vinegar water. After emptying, the NATURE`S HEAD is fitted with a new coconut fiber brick and is immediately ready for use again. The bricks are vacuum packed and can be stored for a long time.Delivery includes the required installation material.Advantages at a glance:100% Ecological,no waste water gets into the sea,little installation effort,no water or sewage connections necessary,no clogged hoses, leaking shipboard culverts, valves or seals,space-saving, as no separate wastewater tank is required,robust and maintenance-free,no pumping out of the holding tank in port,easy operation.

Quiet, electric marine toilets, equipped with a powerful macerator pump and a separate Par-Max 3 flushing pump for drawing in external water. The amount of flushing water is 1-2 litres and can be activated as required using the control panel supplied.Available in two different sizes: Compact version with wooden toilet lid or Comfort version with large toilet bowl (household standard) with soft-close lid made of composite plastic.Both models are available for either 12 volt or 24 volt.The Quiet Flush E2 has a quick coupling system - the pump unit can be detached from the base holder without tools, is easily accessible and easy to maintain.  The base and pump are concealed, which simplifies cleaning and hygiene.The toilet is suitable for many installation situations: the base with the attached chopper pump can alternatively be mounted on the side, and the pump can also be attached rotated by 180°. The fixing points of the base are identical to those of previous Jabsco Quiet Flush / Standard Marine toilets since 2001.Included in delivery: 19mm (3/4") hose connections for flush pump, 25mm outlet piece waste water pump in straight and 90° bend, hose adapter for connection to 38mm (1-1/2") waste water pipe, sea water filter, control panel with black box.

The modern, electric on-board toilets in the JABSCO Quiet Flush E2 series are characterised by their low operating volume and high level of convenience.The models in the series designed for flushing with onboard fresh water can be connected to existing pressure water supplies with a flow rate of 11 l/min and more. The solenoid valve with backflow preventer protects against potable contamination of the freshwater supply. A powerful macerator pump takes care of the dischargeThe amount of flush water can be controlled using the control panel supplied. The Quiet Flush E2 features a quick release system - the easily accessible pump unit can be detached from the base holder without tools - maintenance is quick and easy. The toilet can be used in many installation situations: the base with the attached discharger pump can alternatively be mounted on the side, and the pump can also be coupled rotated by 180°. Another advantage of the JABSCO Quiet Flush E2 is Easy-to-clean shroud Available in the Compact version with a wooden toilet lid or the Comfort version with a plastic SoftClose lid. Available for 12V and 24 V. Supplied with: 25mm waste water pump outlet in straight and 90° bends, hose adapter for connection to 38mm (1 1/2") waste water pipe, control panel with black box. Models designed for flushing with seawater can be found under similar products.

The WandaGO compost separation toilet from TROBOLO is an easy-to-use, convenient alternative to chemical toilets or the use of a faeces tank in areas where the discharge of waste water is prohibited.• Extra compact transport dimensions• Weighs only 4.2 kg• Adjustable seat height of 306 mm or 436 mm• Self-sufficient operation without water, chemicals or electricity• Reliable separation of urine and solids• Odourless and spill-proof thanks to TROBOLO SafeShell System®• Ergonomically shaped toilet seat for high comfort• Weatherproof and highly robust• Easy and hygienic emptying and cleaning• Level indicator for the urine• Practical holder for urine diverter in the lid• Fastening system for safe transportation• Firmly closing toilet lid• Can be used with regular toilet paper• Includes one roll of inlays • Tested load-bearing capacity of 150 kgDimensions when closed height 314 mm, depth 382 mm, width 341mmMin. seat height: 306 mmMax. seat height: 436 mmTested load-bearing capacity: 150 kgWeight: 4.2 kg.CapacityMaximum number of usages through defecating: 8-12 usagesMaximum number of usages through urinating: 10-20 usagesVolume of the container for solids: 6.5 litresVolume of the container for liquids: 4.6 litresLitter and inlays can be found under "Accessories" further down on this page.

With a little manual dexterity, the TROBOLO DIY set can be used to install a compost separation toilet in a (wooden) body.The "inner workings" made of plastic components disappear from view and only the wooden toilet lid remains visible in the wooden interior of the yacht, van or tiny house.The compost separation toilet is an easy-to-use, convenient alternative to chemical toilets or the use of a faeces tank in areas where the discharge of waste water is prohibited.The advantages of a separating toilet at a glance:Connection-free use without electricity, water, chemicals or faeces tanksEasy, convenient use like a conventional toiletReliable separation of urine and solidsOdourless operation thanks to the use of litter or an exhaust air system for the solids containerEasy and hygienic emptying and cleaning of the solids and liquid containersEasy disposal of toilet wasteComposting of toilet waste is also possibleNo water or electrical connections, onboard outlets or separate faeces tanks are required.The DIY set consists of:1x toilet seat with lid (both made of wood)1x separating toilet insert (grey)1x cutting template for the installation of the separating toilet insert1x filter strainer and hose connection with integrated filter strainer for DN321x liquid container, volume 4.6 litres (maximum 10 to 20 uses through urination)1x solids container, volume 6.5 litres (maximum 8 to 12 uses through defecation). Recommended emptying interval of the solids container: 5 to 10 days1x Assembly instructions for the urine-diverting toilet insert1x Instructions for use and care instructions for the urine-diverting toilet insertFurther down on this page under "Accessories & spare parts" you will find a spill stop for the liquid container, an exhaust air duct set and the consumables litter and inlays.  

Very noble classic toilet-paper holder. The sand cast bronze body is hand polished or chromed. A (not included) toilet paper roll is held on a stainless steel bail with a wood roller.

A sanitary solution for the lavatory made from white break-proof ABS plastic. BRUSH & STOW toilet brush: the odour proof wall container keeps the brush safe even in heavy seas and it is nevertheless easy to remove it for cleaning> The small brush head (diameter 55mm) is tailored to the ships toilet and can be replaced. Measurements of the container - length x diameter: 150 x 85mm. Total height with brush: 320mm.

Hygienic solution for the toilet, made of white, unbreakable ABS plastic. DRYROLL is an innovative toilet paper dispenser: the toilet paper roll is sealed moisture-proof under the cover, the first sheet is automatically rolled out when it is opened. For surface or recessed mounting (delivery includes installation panel).Dimensions surface-mounted version WxHxD: 170 x 160 x 145 mm.Dimensions built-in version WxHxD: 195 x 185 x 75/75 mm.

Spares for the famous BABY BLAKES toilet.Please check the attached PDF at "Downloads & informations" for contents of this kit.

Accessory for LAVAC POPULAR onboard toilets: Available spare part sets:* Seat and cover of white plastic, complete with seals, * Seat or cover alone, * Seals for seat or cover,* Plastic hinge sets (please ask for the matching model),* Complete seal set,* Seat and cover complete with seal and hinge set. A detailed view of the table can be found under "Downloads & Information".

Standard service kit for toilets RHEINSTROM type Y4.Contents of the kit: Please check the pdf at "Downloads & informations".

Blakes Victory Extended Cruising Spares Kit. Included is a 56-page ‘Owners Handbook’ with many useful installation, usage, maintenance and repair tips for BLAKES marine toilets.Parts:1 x TBB7705 Hose connection2 x TBB7300 Back connection washer2 x TBB7335 Hose clip1 x TBB7340 Copper washer1 x TBB7345 Asbestos Washer1 x TBB7350 Washer1 x TBB7355 Bucket Washer1 x TBB7360 Leather Washer 1"1 x TBB7385 Centre Weighted Rubber Ball1 x TBB7390 Joint4 x TBB7395 Fibre Washer4 x TBB7400 Rubber Washer6 x TBB7405 Rubber Washer1 x TBB7415 "O" Ring 3/8"1 x TBB7416 Lip Seal 3/8"1 x TBB7640 Gland Packing1 x TBB7370 Washer 1 1/2" Leather1 x SCX6989 Washer 2" Leather2 x TBV7875 Washer 5/8" Leather2 x TBV7880 Joint (Discharge Cylinder)2 x TBV7885 Bucket Washer (Discharge Pump)1 x TBV7890 Top Clack Valve (Discharge Pump)1 x TBV7895 Valve (Lower Clack Valve)1 x TBV7900 "O" Ring 5/8" (Discharge Pump)1 x TBV7901 Lip Seal 5/8" (Discharge Pump)1 x TBBLIT Handbook

Robust diaphragm pump for extracting sewage from the pump specialist JABSCO. Dry self-priming up to 3.0 m. Full passage due to the use of lip valves. Universal and flexible installation, as both the pump head and the hose direction can be adjusted as required.Dimensions L x W x H: 278 x 161 x 132 mm. Available for 12 V or 24 V.

Proven bilge pump with robust housing of white plastic for mounting behind the bulkhead or below the deck with through reaching pump handle (bulkhead pump, below deck pump), especially suited for the installation in the sanitary areas. The efficient membrane pump is easy to maintain without tools through the large screw-off inspection port. Self priming up to 4,5m, maximum delivery height: 4,5m. For hose fittings of 38mm. Very well suited as a head pump, for example, for LAVAC POPULAR or ZENITH toilets (vacuum pumps). Type HENDERSON MK5 U/D, white.

Proven bilge pump with robust housing of white plastic for mounting on the bulkhead (bulkhead pump), especially suited for the installation in the sanitary areas. The efficient membrane pump is easy to maintain without tools through the large screw-off inspection port. Self priming up to 4,5m, maximum delivery height: 4,5m. For hose fittings of 38mm. Very well suited as a head pump, for example, for LAVAC POPULAR or ZENITH toilets (vacuum pumps). Type HENDERSON MK5 T/A, white.

WC seat and cover for the bigger bowl (komfort) from JABSCO.This toilet seat fits both manual toilets JABSCO KOMFORT, and electric toilet JABSCO QUIET FLUSH KOMFORT.

Service Kits for the JABSCO toilets COMFORT and COMPACT. Please note the date of manufacture of your toilet.

Spares for diaphragm pump HENDERSON/WHALE MK5.

Accessories and replacement parts for LAVAC ZENITH onboard toilets:We have even more replacement parts in stock.

Standard service kit for toilets RHEINSTROM type Y3.Contents of the kit:1 x Weight pressure valve plate Y2 G0102042 1 x Seal pressure valve plate Y2 A0102042 2 x O-ring 60 x 2 NBR 0103047 1 x O-ring 50 x 3,5 NBR 0103057 1 x pressure lip valve 0101052 1 x seal for Delrin piston Y3 0103051 1 x piston rod seal Y3 0103017 1 x plain bearing bush Y3 0103048 1 x seal for flush valve flap Y3 D0103034 1 x pressure piece for flush valve Y3 0103037 1 x retaining orifice Y8-10S 0111017 2 x plain bearing bush for changeover lever Y3 0103066 1 x O-ring 7,5 x 1.5 NBR 0103065 6 x plain bearing bush lever Y3 0103027 4 x plastic disc 0101006 1 x funnel seal round version 0103007

The spare hand pump TWIST'N'LOCK for the JABSCO toilets COMPACT and COMFORT with their safety system suppress the siphoning effect through a simple 90° turn of the handle.

WC seat and cover for the small bowl (Kompakt) from JABSCO.This toilet seat fits both manual toilets JABSCO KOMPAKT, and electric toilet JABSCO QUIET FLUSH KOMPAKT.

Service kit for JABSCO QUIET FLUSH marine toilets COMPACT and COMFORT. The Service kit includes: - 1 x Bowl O-Ring Seal, - 1 x Joker - Valve, - 1 x O-ring, - 1 x Seal, - 2 x Washer.

This white bowl from best china porcellain is the original spare part for the legendary BLAKES yacht toilets.Fits the BLAKES BABY or VICTORY.p>

Oval Seat & Cover c/w Buffers. Includes complete Hinge Assembly (TBB7252).Available in mahogany or white coated. Suitable for:Baby BlakeBlakes MinorBlakes Victory

Accessories for RHEINSTROM toilets: White seat and lid (large).Suitable for all RHEINSTROM toilets.

The pressure valve plate from RHEINSTROM is made of rubber and has a metal weight. This RHEINSTROM spare part is suitable for the Y2 or Y3 toilet.

Jabsco 58541-1000 Pulley and Belt Kit.New version: Pulleys made of aluminum. Compatible with the Jabsco toilet series 58500.Contains Small and Large Pulley, Belt and Clip.