On a ship, there are many hatches, flaps, doors and lids. Whether interior or exterior of the boat - for a durable, solid mounting and easy opening and closing you need properly dimensioned hinges made of stainless material, like brass or stainless steel. A hinge consists of two similar parts that are rotatably attached to a bolt. Special, long hinges are called piano hinges because they are also used to attach piano flaps. They are versatile and can be easily cut to the required size. A concealed hinge is used especially for concealed mounting of cabinet doors. Hatch hinges, on the other hand, are very sturdy outdoor hinges for deck hatches or skylight hatches. These fittings can be supplied in heavy, elegant versions made of cast bronze. Whether it is a hatch for folding tables or folding worktops, a rail hinge, strap hinge or lift-off hinge - you will certainly find the right item for the use aboard or at home.
- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
-
Cabin & comfort
- Lamps, lights & lanterns
- Clocks, barometers & instruments
- Stoves & heaters
- Cooker, oven & barbecue
- Interior fittings
- Cabinet fittings
- Hinges & strap hinges
- Flush handles
- Locks
- Bolts & fasteners
- Hooks
- Clothing
- Life on board
- Store nets & bags
- Bags & duffel bags
- Cushions & mattress
- Maritime decoration
- Key rings
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Hinges & strap hinges
Quality butt hinges made from seamless drawn brass profile material, made by DAVEY LONDON in England.Equiped with a fixed pin. Avaiable with a brushed, polished or chrome plated surface finish.
Quality hinge, made of extruded brass profile material.Drilled and milled, with fixed brass pin and finished surface.
Ball finial hinge by the English manufacturer DAVEY LONDON. Made of brass with a polished surface and a fixed ball pin.
Quality hinge of polished brass with polished or chromed finish.Pulled profile material, drilled and milled, with fixed brass pin.Also available in matt chromed brass by request.
Small hinge made of cast brass, with fixed pin and countersunk drill holes. The surface is highly polished. Available with bottom or top roller.
High quality brass hinges with satin chromed surface.Made of drawn brass material, drilled and milled, with fixed brass pin.
Strong hinge with removable pin. Made from brass, surface polished brass or chrome plated.Hinge for ship's doors, in accordance with DIN 81401B.
Light hinge with fixed pin, precisely made from profiled brass. The surface is brushed brass or nickel plated brass.
Removable hinge for furniture construction with two identical, slender arms.The pin is loose and made from Stainless steel, the body is made from cast brass, the surface is polished or nickel plated.
Quality import.Rolled stainless steel, with riveted stainless steel pin.
Medium wide butt hinge made from stainless steel A2 (1.4301), with rivetted stainless steel pin.Surface: matt, brushed finish, quality product made in Germany.
Patented hinge for furniture construction. Long-oval version for recess mounting made from chromed brass, the mechanism is from stainless steel.Widest angle 180°.
Narrow butt hinge made from stainless steel A2 (1.4301), with rivetted stainless steel pin. Surface: matt, brushed finish, quality product made in Germany.
Squarish hinge made from stainless steel A2 (1.4301), with rivetted stainless steel pin. Surface: matt, brushed finish, quality product made in Germany.
Light design of cast brass, polished or chromed.With square flaps and fixed pin.
These polished locker hinges are plane smooth without screw holes, with M4 threaded sockets and with the draw point raise underneath.The narrow arm is mounted invisibly in the hatch frame.Made from cast brass or chromed with stainless steel pin.
These polished locker hinges have a flat, smooth surface without screw holes, with M4 threaded sockets and with the draw point raise underneath.Made from cast brass or chromed with stainless steel pin.
Extra wide butt hinge made from stainless steel A2 (1.4301), with rivetted stainless steel pin.Surface: matt, brushed finish, quality product made in Germany.
Wide hinge, made from stainless steel A2 (1.4301), with rivetted stainless steel pin.Surface: matte, brushed finish.Quality product, made in Germany.
T-strips made of A4 stainless steel (AISI 316). Item No. 5057-100 made of A2 stainless steel.The surface is polished.
Stainless steel offset hinge from ROCA made for hatch covers.
High-quality, sand-cast brass strap hinge with equal-length flaps and solid pin.Avaiable with a polished or chrome plated finish.
Solid hinge with fixed pin made of investment cast stainless steel with polished, smooth surface and bottom roller. The flat design without open screw heads makes the hinge suitable for mounting deck hatches or cockpit lockers. The M6 threaded bolts have a length of 45 mm.
Simple, straight skylight hinge with equal-length leaves and a slightly curved central section to match the skylight frame.Sand-cast bronze, hand-polished, heavy design. Weight 390 g.Note: The layout of the holes may vary from that shown in the illustration.
Small hinge made of cast brass, with fixed pin and countersunk drill holes. The surface is highly polished. Available with bottom or top roller.
These hinges allow to easily take apart or fasten hatches, doors or engine covers by pulling the spring-loaded pin.Made of forged bronze with a matte tumbled or chrome plated finish. Always come in pairs (1 left and 1 right).
Strong T-shaped hinge made from cast brass with vertically offset spindle from stainless steel.The surface is chromed brass.
Electropolished hinge with a solid stainless steel pin.With pressed edges.
These hinges from the Swedish manufacturer ROCA are equipped with a patented friction function that makes it possible to keep doors and hatches open or closed without the need for additional aids. This eliminates the need for additional hatch springs for some applications. Made of electropolished stainless steel with Ø 5 mm holes.
Electropolished hinge with fixed stainless steel pin.With drawn edges.
Heavy-duty, high-quality A4 stainless steel investment-cast part (AISI 316), with 5-mm holes.
Electropolished hinge with fixed stainless steel pin.With drawn edges.
Electropolished hinge with fixed stainless steel pin.With deep-drawn edges.
Heavy-duty strap hinge made of cast brass with height offset (cranked).Avaiable with polished or chrome finish, with a stainless steel pin.
Light version made of brass, polished or chromed.With fixed brass pin.
Electropolished hinge with fixed stainless steel pin.With drawn edges.
Strap hinge with arms of different length.Made from polished or chromed cast brass.
Light design of cast brass, polished or chromed.With square flaps and fixed pin.
Heavy-duty, made of precision-cast stainless steel, with 5 mm screw holes.
Robust, lift-off furniture hinge in a straight design for screw mounting.With extruded and riveted joint and spacer ring, made from A2 stainless steel (AISI304), with wide bands and matte surface finish.
Midweight, good quality, polished or chromed brass.With brass pin and 7.5 mm offset for overlaid doors.Made in Germany.Right and left designs available.
Polished. chromed or matte-chromed brass.Straight design of extruded profile material, drilled and shaped.Rounded edges, brass pin with spacer ring.Conforms to DIN 81401. Made in Germany.Right and left designs available.
Polished brass, heavy design, for blunt enclosed doors.Straight design with brass pin and spacer ring, cast flaps.Right and left designs available.
Robust, lift-off furniture hinge in a straight design for screw mounting.With extruded and riveted joint and spacer ring, made from A2 stainless steel (AISI 304).It has narrow bands with rounded corners and matt surface.
Patented hinge for furniture construction. Long-oval version for recess mounting made from chromed brass, the mechanism is from stainless steel.Widest angle 180°.
Cast brass, polished or chromed.Light but strong design for furniture and light doors.With brass pin and spacer ring.Right and left designs available.
Medium weight, "German quality" lift-off hinges.Made from extruded brass profile with a polished or chromed surface, drilled, with a smoothed surface finish. The pin is also made of brass.Right and left designs available.
Inexpensive quality lift-off hinges, rolled brass plate, rolled with a smoothed surface finish.With brass pin and with a 7.5 mm offset for overlaid doors.Right and left designs available.
Cast brass lift-off hinge with horizontal heavy design for obtuse-lying doors.With strong barrel D x L = 16 x 48 mm.Without spacer ring!
Concealed self-closing hinge made entirely of A2 stainless steel.The spring is steel, opens to an angle of 100°, holes 35mm.Available for various overlaps.The counter plate must be ordered separately.
Concealed hinge made from stainless steel A2 with integrated damper, hinge cup diameter: 35mm.Shipping includes counter plate. Import quality.
Steel hinges to be welded in, conforming to DIN 83105. For heavy boat doors and hatches, with slotted hole (type C) or round hole (type D) and drilled for grease nipples (threaded M 10 x 1). Black steel. Stainless-steel bolt, secured with a splint.Weight: 1500 g.
Heavy, lift-off hinge to screw on, straight design, with solid riveted pin and spacer ring.The hinge is made from stainless steel (AISI 304), has narrow arms, the surface is matte.
Folding tables or folding work tops can easily be constructed with the patented RAKEGO folding bracket made by ROCA in Sweden.Spring-loaded eloxadized aluminium tubing enables telescopic action.Eight different sizes offer every possibility of mounting with one or two brackets according to the load requirements.Easy handling: to swing open - simply lift it up and loosen the arrest with a finger.Idealy suited for the boat and camping but also in the home - useful in the kitchen, on the balcony, in the shop or in the garage. P1 = Evenly distributed load; P2 = Point load. A matching hinge is also available (see suitable items).
Exceptionally strong and solid brass swallow-tail design.High-gloss polished finish.
Together with the RAKEGO folding bracket (see suitable items) this sturdy hinge from swedish manufacturer ROCA forms a unique folding system which enables easy installation for folding benches or tabletops.The hinge is screwed directly on to the wall, the panel/board can be mounted either continuously or split. Made of precision molded aluminum.
Polished cast-stainless steel hinge for folding-tables. Square, with rounded edges.Weight 38 g.
Ingenious system for attaching folding table leaves.The spring supported snap-action mechanism makes the holding of the table top without additional supports possible. The table leaves can be folded by 180° down and out of the way and arrested rattle-free. Very strong fitting with good holding support and in robust stainless steel quality.Dimensions of one leave: 95 x 65 mm.
Small hinge for attaching a tabletop that folds up.Polished or chromed brass design.
Middle piece of investment-cast stainless steel.The flaps are made from rolled punched sheets.
Heavy duty design made of stainless steel, thickness = 4 mm.
Four part table bracket set made from stainless steel A2, consisting of two wall sheets 85 x 53 x 2mm and two angle pieces 75 x 45 x 27 x 2mm, with 6 mm countersunk holes.
Piano hinge made of brass. Quality hinge made in Germany.The hinge is already drilled and countersunk: the hole spacing is 60.4 mm, trade pitch 15 mm, for the hole diameter see table below.The mandrel (mandrel = axis = 1.75 mm) of the piano hinge is also made of brass.Available in different lengths
Countersunk slotted head screws (according to DIN 97) made of brass. Manufactured in German quality production.We supply these screws individually or in packs.Package size: 100 or 200 pieces per pack (see graduated price in the table).The lower graduated price applies to complete packs, i.e. a quantity that is evenly divisible by 100 or 200.
Piano hinge made of stainless steel (V2A). Undrilled, commercial pitch 15 mm. The mandrel (mandrel = axis = 1.75 mm) of the piano hinge is also made of stainless steel.Available in different lengths.
Piano hinge made of stainless steel (V2A). Quality hinge made in Germany.The hinge is already drilled and countersunk: hole spacing 60.4 mm, trade pitch 15 mm, hole diameter see table.The mandrel (mandrel = axis = 1.75 mm) of the piano hinge is also made of stainless steel.Available in different lengths
Countersunk slotted brass screws (DIN 97).The surface is nickel plated Manufactured to high-quality standards in Germany. You can order these screws by the piece or in packages of 100. Please order in amounts divisible by 100, in order to get the best price.
