Steel stanchions to build a stern or bulwark railing. The stanchions are neatly processed, with drilled opening and blind thread. Comes with matching bolt and grommet. The article 1325-007 is a steel ball to weld onto a steel stanchion. Additional diameters of stanchion balls are available on request.
Stainless-steel wire covered with white PVC (construction 7x7) for lifelines, guys, bolt ropes, and other uses where impact resistance and abrasion protection are crucial. We have chosen for you from the lifeline alternatives in the market the one with the thickest and thus longest-lasting cover.Shipping in metre lengths. For the best price, please order in lengths divisible by 50 meters. You will find guardrail wire on 125 m spools under "Suitable Items" at the bottom of this page. Other diameters and qualities are available on request.
Stainless-steel wire covered with white PVC (construction 7x7) for lifelines, guys, bolt ropes, and other uses where impact resistance and abrasion protection are crucial. We have chosen for you from the lifeline alternatives in the market the one with the thickest and thus longest-lasting cover.Shipping on 125 m spools. You will find guardrail wire in metre lengths under "Suitable Items" at the bottom of this page. Other diameters and qualities are available on request.
Classic, elegantly shaped stanchions, built in an English foundry from historic cast models. Sand-cast from solid bronze and hand polished and drilled.With a fixed angled foot that screws in to the toerail or deck edge.Core holes of 8 mm exist for the lifelines to run through. They can be drilled out to a maximum of 15 mm. The stanchions are tapered. Because of the large amount of hand work in the manufacture, small deviations in dimensions are unavoidable. Size of the foot L x H x W: 97 x 72 x 59 mm.
Strong cast-bronze flush stanchion base, matches our classic DAVEY stanchions.Shiny polished by hand.For fitting through the deck or in the top rail.A countersunk stainless fixing screw holds the stanchion in place.
Robust stanchion socket made from bronze casting, high gloss polished by hand. compatible with our classic DAVEY stanchions (with a diameter of 27,5 mm). Weight: 1,7 kg
Classic, elegantly shaped stanchions, built in an English foundry from historic cast models. Sand-cast from solid bronze and hand polished and drilled.Loose for plugging in, with cotter-pin hole.Core holes of 8 mm exist for the lifelines to run through. They can be drilled out to a maximum of 15 mm. The stanchions are tapered.Because of the large amount of hand work in the manufacture, small deviations in dimensions are unavoidable.
Classic, beautifully shaped stanchions, loose for plugging in, with cotter pin hole. Made from solid bronze based on historical cast models by the traditional British manufacturer DAVEY.Core holes of 8 mm exist for the lifelines to run through. They can be drilled out to a maximum of 15 mm.Because of the large amount of hand work in the manufacture, small deviations in dimensions are unavoidable. Note: Different old shape of the Davey railing support DL1665 (top light 1665-625). The difference is in the lower diameter, here D=25mm tapered. Therefore does not fit the DAVEY stanchion sockets from our range.
Classic elegantly shaped stanchions, built in an English foundry from historic cast models. Sand-cast from solid bronze and hand polished and drilled.With a round foot that screws in (D = 75 mm). The stanchions are tapered.Core holes of 8 mm exist for the lifelines to run through. They can be drilled out to a maximum of 18 mm.Because of the large amount of hand work in the manufacture, small deviations in dimensions are unavoidable.
This stanchion is a quality product from Germany by NIRO PETERSEN.Made of V4A stainless steel (1.4404).Tube diameter 25 mm x 1.5 mm, cleanly ground and electrolytically polished, tapered at the top.For one (size 450 mm) or two draughts.Type approval by Germanischer Lloyd for:length 450 mm for vessels under 8.0 m, cruising range Vlength 610 mm for ships over 8.0 m, all sailing ranges
Quality product from Germany, made by NIRO PETERSEN. Made from stainless steel V4A 1.4404. Stanchion bases that match stanchions with a diameter of 25 mm (see the hints below). Cleanly shaped and polished.As with the stanchions, the bases are approved by GL.
This railing gate stanchion is a quality product from Germany, made by NIRO PETERSEN. Made from stainless steel V4A 1.4404. Pipe diameter 25mm x 1.5mm, cleanly shaped and polished. Tested by Germanischer Lloyd; approved for all regions and ships over 8 m long.For a complete railing gate two of these stanchions are needed.
Heavy hinges and latches made from hand-polished cast bronze by DAVEY. The open design, as well as the screw attachment (visible heads) allow good conformation to various wood depths. The three-piece fitting set is made up of the actual hinge and the two-piece latch fitting. Comes in two sizes.
Three-part fitting set for installation in a wood railing.Classic, heavy fitting of sand-cast brass, cleanly sanded and polished.An integrated barrel bolt fitting on the bottom allows the hinge to be stopped.The wood profile of the railing must be matched to the fitting.Dimensions (exterior L x W x H) 104 x 75 x 38 mm.Internal dimensions of hinge and flap catch (W x H) 67 x 30 mm (due to the sand casting process, slight dimensional deviations are possible)Weight: Hinge 720 g, latch filling 870 g.Comes in chromed or polished brass.Sold only as a complete set (two-piece latch and hinge).
Strong bronze stanchion socket with a lip and a compact five-cornered ground plate, as well as a support on the side.Two designs: 90° or with 6° angle of inclination for slanted decks.Surface: tumbled with matt finish.
