In boat maintenance, good surface preparation is the key to a long-lasting paint job. After basic cleaning, it is recommended to de-grease the surfaces to be treated, e.g. with an industrial cleaner. Afterwards, the surfaces should be checked for defects. If the old coating has to be removed, a paint remover can be used. If the surface is quite OK, the surface should be sanded with abrasives or sandpaper. When the process is complete, any sanding residues have to be removed with a thinner. If the choice of the most suitable coating product has already been made, the next step is to select a proper painting tool. The type of paintbrush and paint roller used depends on the painted surface. At Toplicht, you find product-related basic aids for paint preparation, sanding and resin processing.
- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Usefull aids
High-quality professional foam roller from ROTA, rounded on both sides. The roller is characterized by the finest foam pores, which enable a particularly smooth surface structure. This makes it ideal for applications where a high-quality finish is required. The paint roller is suitable for most one- and two-component paints. As new solvents are constantly being used in paints, we recommend testing the suitability of the roller in advance.
Very full flat brush in professional top quality.15. Thickness.High-quality, black plastic bristles, fully bonded, therefore minimal hairs.Suitable for high-quality paint work with water-based and solvent-based paints.Red PA plastic frame.Sanded wooden handle.
Spare rolls length 110 mm for standard roller, moltopren rollers with high surface strength, thus no blistering. 2 pieces per pack.
Professional quality brush.Light Chinese bristle, 12th thickness. Wide, brass-plated metal frame, raw wooden handle.
These adhesive cloths remove dust, dirt and grinding dust reliably and thus prepare a clean, dust-free surface for painting. Intended for all surfaces. Non-toxic, Antistatic, Won't dry out. Size approx. 40 x 80 cm.
Scaled mixing cup made of polypropylen (PP) for the mixing of 2-component paints and varnishes as well as epoxy- and resins by volume.
Cleaning and protective glove for general on-board use. It offers reliable protection against cuts when working on sharp-edged parts and sharp corners. A flexible, close-meshed chain mesh made of stainless steel enables a high level of wearing comfort with unrestricted mobility of the hand. 
Foam smoothing brush with wooden handle. With its pointed edge, the brush ensures particularly smooth and bubble-free surfaces.Recommended application: After applying the paint with a brush or roller, the surface is reworked with the foam brush to open the bubbles and give the paint the opportunity to flow well.
Painter's quality.Pure, light, full China bristle brush, metal ring, double bristle support, painted handle.
The EASY ROLL S paint cup is a helpful tool when applying paints and varnishes with a brush and roller. The rolling surface on the inside of the bucket ist vertical, which prevents uncontrolled spilling of paint or varnish. The integrated handle also serves as a holder for brushes and rollers. This makes it easy to switch between the two tools when working. The lid prevents dust from collecting in the paint. Thanks to its shape, the paint bucket can be easily hung up (for example on a ladder), which makes it easier to work in hard-to-reach places. The disposable inner inserts allow the bucket to be used again and again. The paint bucket is sold as a set together with the lid and three disposable tub inserts.Technical details:Capacity: 1 literMaterial: plasticReplacement liners and a magnetic brush holder can be found under "accessories".
Professional quality: Pure, light, full China bristle brush, exceptionally elastic. With double white bristle support, arched bristle level, worked at the end.
Hard paper funnel with cotton strainer (190 my) water- and solvent-proof. For straining and cleaning paint and varnish.
Professional quality. Pure, light China bristle brush, metal edge, long wood handle.
Suitable replacement tray inserts for the EASY-ROLL S paint bucket. The inserts keep the paint bucket clean during work and can be disposed of after use. One set contains three tray inserts. Material: recycled plastic.
The ABRANET abrasive from the Finnish company MIRKA enables virtually dust-free sanding thanks to its mesh structure. The low heat development prevents clogging. The materials used (aluminum oxide on polyamide fabric) guarantee a long service life. Can be used with any commercially available sanding machine and the MIRKA sanding mouse. The multiple perforations always ensure optimum dust extraction and your work area remains clean. The hook-and-loop fastening allows the abrasive to be changed quickly. Round sanding discs, particularly suitable for random orbital sanders. Diameter 125 mm or 150 mm.
High-quality sandpaper from Germany.Works well for hand and machine sanding.Comes in rolls: 11 cm wide. Rolls up to 50 m. longCorundium paper with synthetic resin binding:Comes in 80, 120, 150, 180 grit.Comes in pieces by the meter or as an entire roll for a better price. In order to get the better price, please order in lengths divisible by 50 meters.
High-quality sandpaper of German construction.Well adapted for hand and machine sanding.Silicone-carbide paper in waterproof synthetic resin binding. Comes in 80, 120, 180, 240, 320, 400, 600 grit.Sheets of 23 x 28 cm..
The ABRANET abrasive from the Finnish company MIRKA enables virtually dust-free sanding thanks to its mesh structure. The low heat development prevents clogging. The materials used (aluminum oxide on polyamide fabric) guarantee a long service life. Can be used with any commercially available sanding machine and the MIRKA sanding mouse. The multiple perforations always ensure optimum dust extraction and your work area remains clean. The hook-and-loop fastening allows the abrasive to be changed quickly. Sanding strips: 70 x 125 mm or 81 x 133 mm.
This cork sanding block is the traditional aid for getting a good flat finish from the sandpaper when hand-sanding.Skin-friendly cork, dimensions: 120 x 60 x 35 mm.
Practical handle for hand-sanding. The light plastic handle holds the matching corundum sandpaper (or regular sandpaper). The long sanding surface is used with foam materials that hold their shape and is intended to create an exceptionally good finish. Sanding surface 230 x 80 mm.
A practical, professional-grade hand sanding block from the Finnish abrasive manufacturer MIRKA. This double-sided sanding block allows you to sand precisely into corners and angles, even when sanding by hand.The 70 x 125 mm sanding block features a grip surface on both sides for hook-and-loop sanding pads or sanding mesh such as Mikra ABRANET (Item No. 2383-…, see “Accessories & Replacement Parts”). This allows you to select the desired grit size. Changing the abrasive is quick and easy on both sides.The hand block is unperforated and not designed for dust extraction. One side is made of soft, low-density foam, and the other side is made of black, medium-density foam. This makes the hand sanding block suitable for a variety of surface textures.
This rubber sanding block is a practical aid for hand-sanding. The sandpaper is held reliably by steel pins. The sanding surface is flat, the grip surface rounded to be user-friendly. Black, sanding surface 130 x 70 mm.
For wet or dry sanding - matches edges and curves perfectly.Aluminum-oxide grit for long life (fine / midrange grits 80 - 120; midrange /corse grits 60 - 80).Dimensions: 100 x 70 x 27 mm.
High-quality sandpaper of German construction.Well adapted for hand and machine sanding.Corundum paper in glued binding. Comes in 40, 60, 80, 100, 120, 150, 180 grit.Paper commodity 28 x 23 cm.
High-quality sanding pad for cleaning, creating a matt finish, or finishing surfaces.You can adjust the finish:lighter but more even abrasion, and thus better paint adhesion.Ideal for intermediate sanding, quick and effective, no need to replace sandpaper, long life.Suitable for hand and machine sanding. Pads: 152 x 229 mm.
The perfect tool for clean, low-fatigue work: the ergonomic shape of the sanding mouse with a particularly non-slip surface makes sanding much easier.The integrated suction unit with regulation greatly reduces the health risks associated with hand sanding in particular.The service life of the abrasive is also significantly longer thanks to the extraction system.Quick abrasive change thanks to Velcro system. Available in two sizes:-Velcro surface 70 x 125mm and round Velcro discs D= 150mmThe matching, very flexible, 4 m long suction hose can be connected directly to any vacuum cleaner thanks to a rubber cone without any additional adapters.
This hand sanding block is unfortunately no longer available. The MIRKA hand block (see "Similar products") is a suitable replacement.Practical professional hand sanding block from the well-known abrasives manufacturer HERMES. This sanding block enables precise sanding in corners and angles, even when sanding by hand.The sanding block has a Velcro surface on both sides for non-woven abrasive pads or sanding mesh (e.g. Mikra ABRANET item no. 2383-...). It is made of hard foam on one side and softer foam on the other and is therefore suitable for different surface structures.The matching HERMES hand pads OA708 with tricot have a 280 grit size
WEST SYSTEM special pumps that mix resin and hardener in a ratio of 3:1. Attention: These pumps may only be used for special hardeners (type 207 or 209) according to the manufacturer's instructions and under no circumstances for the combination standard resin / standard hardener (205 or 206).Only for mixing ratio 3:1!
When using epoxy resins, it is essential to maintain the correct mixing ratio of the components! When used correctly, these special dosing pumps from the WEST system guarantee that the resin and hardener are always mixed in the correct ratio. It enables simple, clean and economical handling of the material.These pumps should always be ordered with the first application. For use only with standard resin type 105 and standard hardener type 205 or 206 in a mixing ratio (by volume) of 5:1.
Short brushes for applying resins. Tools and aids for better processing of WEST-SYSTEM products.
Universal air expulsion roller, metal disc roller for removing entrapped air bubbles and for compressing laminates.
Plastic spatula for better processing of WEST-SYSTEM products. The notched trowel can be used to create an adhesive bed with 3, 4 or 6 mm notches.
Universal air expulsion roller, teflon roller for removing entrapped air bubbles and for compressing laminates.
Polyurethane pigment tinting paste for colour matching of gelcoat repair kits to the original gelcoat colour.PU Tinting Pastes are finely dispersed color pigments that use chemical ties to bind to the materials to be dyed.Max. addition 5%.
Wooden mixing sticks from EPIFANES. Available in two sizes to match the EPIFANES paint cans.
Universal air expulsion roller, flexible roller for removing entrapped air bubbles and for compressing laminates.
Universal air expulsion roller, metal disc roller for removing entrapped air bubbles and for compressing laminates.
Universal air expulsion roller, small disc roller for removing entrapped air bubbles and for compressing laminates.
Effective and odorless paint stripper for almost all 1- and 2-component paints and varnishes, as well as for antifoulings and epoxy primers on all common boatbuilding materials.Non-evaporating, PH neutral, biodegradable, contains no alkalis, acids or biocides and is harmless for the following coating. Can be used below freezing point.Application: Stir well before use. Apply a thick coat with a soft, long-haired brush. After use, remove all residual material before applying a new coat. Avoid repeated overbrushing. Reaction time may take from 30 minutes to 24 hours, depending on the layer of paint to be removed. Make a small test trial on the surface to check the compatibility. The best way to remove treated layers is with a knife or spatula. Other paint and paint stripper residues can be washed from the surface with water.
YACHTCARE ANTIFOULING STRIPPER is a gel-like, highly effective remover for antifouling coatings. The product loosens existing antifouling layers in a short time, allowing them to be easily removed mechanically, without sanding. Due to its gel-like consistency, the material also adheres to vertical surfaces. Gelcoat and intact 2-component primer layers beneath the antifouling are not attacked.Application:Apply ANTIFOULING STRIPPER evenly to the surface using a wide brush. Then leave it to act for about 60 minutes up to a maximum of 2 hours. Scrape off the loosened paint layers with a spatula. Repeat the process if necessary until all coatings are removed. Collect paint residues and dispose of them properly. Protect adjacent surfaces.For safety, it is recommended to wear protective gloves and goggles during application. Then thoroughly clean the surface with fresh water and allow it to dry completely. Technical DataApplication area: Removal of antifouling coatingsSubstrate: GRP, wood, steel, aluminumCoverage: approx. 200–600 ml/m² (depending on the thickness of the old coating)Application and surface temperature: +5 °C to max. +25 °C.Thinning: noneApplication method: brush, mechanical removal with spatula For more information on application, see the Technical Data Sheet under 'Downloads'.
Special cleaner and brightener for weathered and soiled wooden surfaces, especially teak decks. Also cleans GRP, gelcoat and particularly non-slip or textured deck coverings, removes yellowing and rust stains. Greyed teak decks regain their original wood tone, tannin-rich woods such as oak can be neutralized before recoating.OWATROL DECK CLEANER should be used to neutralize the wood after using alkaline deep cleaners such as DEEP CLEANER. The cleaner is based on oxalic acid and is biodegradable.Safety note: Wear chemical-resistant gloves, safety goggles and protective clothing when using.Application: Moisten absorbent substrates such as wood with water. Homogenize container by shaking. Apply evenly, then allow to act for 10-20 minutes. Ensure the surface remains wet during this time (e.g., with a garden hose). After the exposure time, rinse thoroughly with a brush or pressure washer to remove dirt from the pores. In heavily stained areas, repeat the application if necessary. Wait at least three days before further treatment with oils or varnishes (e.g., OWATROL DECK SEALER or AQUADECKS). Technical DataApplication area: Cleaning and brightening of greyed wood in outdoor areasSubstrate: untreated or oiled wood, moisten before applicationApplication: Brush, scrubber, sponge, watering can, sprayerCoverage: approx. 5–10 m²/l depending on degree of soilingThinning: undiluted or dilutable with water up to 1:5 Processing temperature: +5 °C to +35 °CDrying (20 °C): rinse off after 10–15 min., then allow wood to dry for 48 hrsFurther information on application can be found in the technical data sheet under "Downloads".
Hight purified paraffin, for cleaning tools and all paraffin-resistant surfaces.Dissolves oil, grease and wax.
Before every painting and protection job, a proper and professional cleaning of the surface is necessary. This highly effective cleaner removes oil, grease, fuel, and even silicone residues reliably from painted or GRP finishes. Not intended for cleaning raw wood.
Versatile water-based industrial cleaner for stubborn soiling on almost all surfaces. Whether oil films, grease deposits, soot or adhesive residues - OWATROL PURATROL removes even heavy residues thoroughly and gently. The alkaline cleaner is suitable for indoor and outdoor use, on horizontal and vertical surfaces, e.g. plastic windows, awnings, garden furniture, machines or workshop floors. PURATROL is also ideal for degreasing before painting. The cleaner is available as a concentrate and can be diluted with water as required. Subsequent neutralization is recommended for wooden surfaces to prevent any darkening.Application: Do not apply to hot surfaces. Ensure good ventilation. Dilute the concentrate in a ratio of 1:5 to 1:20. Apply the product and leave to work for ten minutes. Remove soiling with a brush or cloth, wash off cleaning agent residues with clear water. Repeat the application for heavy soiling  
White Spirit is a turpentine substitute and a mineral oil-based thinner. The product is used to thin paints based on oil and oil-alkyd resin, as well as a cleaning agent for parquet, linoleum, and brushes. It is characterized by consistent quality and good material compatibility.Application: The product is added to the respective paint and mixed. The maximum amount depends on the manufacturer's specifications of the respective paint. In addition, white spirit can be used to clean used painting tools such as brushes. Always close tightly after use and store in a cool, but frost-free place.Technical DataField of application: Thinner for paints based on oil and oil-alkyd resin; cleaning agent Substrate: Painted surfaces, used toolsCoverage: depends on the paint system and desired viscosityDrying times: depends on the paint system usedFurther information on processing can be found in the technical data sheet under 'Downloads'.
Silicone remover is a high-quality cleaner with a short evaporation time. Suitable for the complete removal of silicone oil residues, greases, oils and waxes before coating or sealing.
Fast-volatile and effective agent for cleaning and degreasing surfaces before painting or bonding. Dissolves fresh paint and adhesive residues without causing lasting damage to the surface.
PANTASOL LIGHT is a purely distilled cleaner with natural lemon extracts without acetone and xylene that is ideal for preparing bonding and varnishing. PANTASOL LIGHT vents completely without leaving any residue. Especially recommended for sensitive surfaces, does not even attack polystyrene. Ideal for removing sticker residues, grease, adhesive, oil, wax, preservatives, fresh epoxy adhesives, silicone, PU and SMP sealants. It does not attack fully hardened paints and is neutral to most plastics (test first), does not leave an oil film.Container: 1-litre can or 500 ml spray bottle
A cleaning and brightening agent for treating grayed wood surfaces. The formulation of LE TONKINOIS Wood Brightener is based on nature-identical oxalic acid and coconut fatty acid active ingredients and is suitable for hard- and softwood in outdoor areas, such as decking or garden furniture. The brightener reliably removes weather-related discoloration and prepares the wood for subsequent surface treatment.Application: Shake well before use and apply generously with a brush. Do not use in direct sunlight. Moisten wood with water if necessary. After a reaction time of 10–15 minutes, scrub with a hard brush or abrasive fleece and water. Then rinse thoroughly with water and allow to dry completely. The surface will be rough afterward and should be sanded before further treatment.Technical DataApplication area: Brightening and cleaning of grayed hardwood and softwood, e.g., decking and garden furnitureSubstrate: All woods, roughly pre-cleanedCoverage: Min. 100 ml/m², depending on the wood's absorbencyApplication method: Brush and scrubberDrying times (at 20 °C): 1–2 days depending on weather conditionsFurther information on application can be found in the Technical Data Sheet under 'Downloads'.
Highly effective, biodegradable paint remover and softener based on renewable raw materials. LE TONKINOIS Natural Brush Cleaner removes fresh and dried paint residues from painting, varnishing, and artist tools. Gentle cleaning of brush bristles, also suitable for natural hair brushes. Easily dissolves fresh as well as dried residues of paints, varnishes, oils, waxes, and other stubborn contaminants. It conditions the bristles, especially natural and China bristles, and prevents them from drying out. The cleaner is also suitable for storing brushes, as it hardly evaporates and remains usable for a long time.Application: Shake well before use. Dip dirty tools into LE TONKINOIS NATURAL BRUSH CLEANER, knead thoroughly and then rinse with water until the water runs clear. For heavily dried material, soaking overnight is recommended. Then knead and rinse the tools again. The cleaner is very economical and remains effective even when discolored.Safety information: contains orange oil, may cause allergic reactions. For safety, wear gloves when using.Further information on processing can be found in the technical data sheet under 'Downloads'.
Comprehensive instructions for repair of wooden boats with epoxy materials.With many instructive drawings, pictures and color photos. German edition, translated from the American.
Comprehensive instructions for repair of plastic boats with epoxy materials.With many instructive drawings, pictures and color photos. German edition, translated from the American. Format 29 x 21cm, spiral bound brochure, 76 pages.German edition.
Indispensable handbook for professional boatbuilding work with WEST Epoxy.This handbook can be downloaded free as a PDF under "Downloads & Information".On request we can also send you the print version of this handbook free with any epoxy order.German edition.
