An exceptionally practical tool for removing impellers without damaging the pump housing.Body and jaws of aluminum, shaft of stainless steel.Dimensions, approx. 140 x 165 mm (W x H). Weight, 450 g.
Self-priming impeller pump with free shaft end. for socket mounting. Equipped with neoprene impeller for use as sea or fresh water pump.The pump housing is made of bronze, the axle with ball bearings is made of stainless steelThe details regarding the output refer to an input speed 1500 U/min and back pressure at 0.3 bar.
Efficient electric pump with bronze pump head and impeller of nitrile rubber (oil-proof), dry self-priming to 1.2 m.Power 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), intended for endurance use.Dimensions 190 x 120 x 80 mm.Attachment 1/2" (inner) or 25mm hose.Versions for 12V or 24V on-board voltage are available.Also available is the JABSCO UTILITY PUPPY 2000 version specially designed for pumping bilge water with 20-minute dry-running protection.
This universal feed pump for freshwater and seawater has a hard-wearing impeller made of nitrile rubber. The motor is equipped with an integrated waterproof switch with three positions (forward/off/reverse) so that the flow direction can be changed.This compact design makes the impeller pump ideal for transferring water or grey water, as well as for emptying bilges and grey water. The pump body is made of nickel-plated brass and the impeller is made of hard-wearing nitrile rubber. The pump is dry self-priming up to a height of 1.5 metres. The connecting pieces allow direct hose connection, but also have BSP internal threads, so that connection with appropriate fittings is also possible.Available in two performance levels for 12 over 24 volts.You can find other MARCO pumps in the UP1 series under the "Similar products" tab.
Self-priming electric pump for transfer of fresh or salt water with flexible impeller of nitrile rubber which allows the problem-free transit of small particles. Nickel-plated brass body, shaft in stainless steel. AISI 316L. Voltage: 230V-50Hz.Consumption: 3,3 A.Fuse: 4 A.Selfpriming up to 1,5 m height.Flow rate: 30l/min.Pressure: 1 bar.Ports: 1/2" Innengewinde (BSP) or hose diameter: 25 mm.Motorpower: 550 W.Weight: 7,3 kg.Also available for 12 volt or 24 volt. See under similar products.
Self-priming electric water pump with with nitrile rubber impeller. The pump body is made of nickel-plated brass. The pump is dry self-priming up to 1.5 m height.The connections have a BSP female thread. A direct hose connection to the connection pieces is also possible.Available in two power ratings for 12 or 24 volts.Also available for 220 volts, see matching items. See similar articles.
Powerful impeller pump with bronze pump head and impeller made of nitrile rubber (oil-resistant), dry self-priming up to 1.20 m. Developed for pumping bilge water. Dry-running protection up to 20 minutes. Capacity 32 l/min at 3 m (0.3 bar) or 27 l/m at 5 m (0.5 bar), suitable for continuous operation.Dimensions 190x120x80 mm.Versions for 12V or 24V on-board voltage are available. Connection 3/4" (inside).
With mechanical cone clutch.These pumps work via a V-belt and can be coupled by hand when needed. Pump with high output (specification at 1500 U/min and a back pressure of 0.3 bar) and self priming from dry. Well suited as an emergency pump or as a deck-wash pump. Pump housing, bronze; stainless steel shaft; neoprene impeller.
Dry self-priming, belt-driven impeller pumps, can be engaged/disengaged by means of an electric magnetic coupling, 12V or 24V.With electric magnet clutch, 12V or 24V.Pump with high output (specification at 1500 U/min and a back pressure of 0.3 bar).Well suited as emergency pump or as a deck-wash pump.Pump housing, bronze, stainless steel shaft, neoprene impeller.
The self-priming 230 V multi-purpose pump JABSCO 53040 UTILITY is a portable pump for filling, pumping out and transferring fresh, salt, and bilge water.The pump is made from bronze, the impeller from oil-proof nitrile rubber, the shaft from stainless steel with a carbon-ceramic mechanical shaft seal. The compact pump can be deployed in multiple ways with its practical handle, is rapidly self-priming from dry up to 4m and will handle hard or soft solids.Air cooled alternate current motor 230 V / 50 Hz, protection class IP55, 0,25 kW at 1400 rpm. With built-in dry-running protection for up to 30 minutes after initial prime