On sailing or motor yachts, limited space below deck should be well organized. In unexpected situations, all items must remain in place and must be reached easily and safely. Furthermore, many movable pieces of furniture on board, such as folding tables, berths or beds, are designed to save space and clear passages. Solid and beautiful furniture fittings are part of a stylish and functional interior. On traditional ships, loose furniture parts like chairs, sea chests or pianos must be secured against rolling. For this purpose brass padeyes with screw-in eyebolt and tapped backing plate can be used. Table fixing sets, folding brackets, table legs, folding table leaves and chart table hinges can be used to install folding tabletops. Furniture angles and corner braces made of brass or sea chest corners made of stainless steel give protection against knocks and damage to furniture edges. We also offer furniture handles, such as inlet handles for sliding doors, drawer handles, drawer knobs and many handles for universal use.
- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
-
Cabin & comfort
- Lamps, lights & lanterns
- Clocks, barometers & instruments
- Stoves & heaters
- Cooker, oven & barbecue
- Interior fittings
- Cabinet fittings
- Hinges & strap hinges
- Flush handles
- Locks
- Bolts & fasteners
- Hooks
- Clothing
- Life on board
- Store nets & bags
- Bags & duffel bags
- Cushions & mattress
- Maritime decoration
- Key rings
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Cabinet fittings
Heavy handle of cast brass.Surface polished brass or chrome plated.
Strong flush ring handle made from polished, precision cast stainless steel.Very easy to mount flush.
Cast brass. With strong folding handle for lifting.Polished or chromed brass finish.
Hatch latch with large countersunk handle. Comes in two sizes.Polished or chromed brass.
Round brass design with a high gloss polished or chromed finish. Attaches with M4 threaded screws from underneath, and thus has from above a smooth, visually appealing finish.
Plain, shapely drawer handle from highly polished stainless steel casting.Weight: 40g.
Very robust drawer handle for flush mounting made from polished brass.Weight: 220 g.
Heavy, classic knob made of solid brass. The knob is fastened with a blind hole M4. Available in polished brass or chrome-plated brass.Weight: 70 g.
Rolled pull-style handle.Polished or nickel plated brass designs.
Light rectangular flush ring latch of A2 stainless steel. Spring-loaded handle won't rattle or remain upright when unneeded.
Plain drawer handle for flush mounting made from polished or chromed pressed brass plate.
Elegant drawer knob from brass in a concave design.The surface is polished or chromed brass.The handle is mounted from the back by means of two M4 blind hole bores.
Strong, functional locker handle (sea-chest handle) for heavy sea and shipping crates. Stainless steel with matt finish. Weight: 176 g.
Light round flush ring latch of stainless steel (A2). The round folding handle lies fully flat in the housing when folded. The integrated spring keeps the handle from rattling or remaining upright when unwanted.
Oval, with straight handle and 3 screw holes.Polished brass or chrome plated.
Light rectangular flush ring latch of A2 stainless steel. Spring-loaded handle won't rattle or remain upright when unneeded.
Brass padeye with screw-in eyebolt and tapped backing plate (D = 38 mm).For mounting equipment on or below deck (for example, tables or chairs).Round mounting plate (not watertight), diameter 50 mm.
Chair lashing for securely fastening a chair to the floor so that it does not slide around uncontrollably even when the boat is moving around a lot.The chair lashing consists of fittings made of matt chrome-plated, trowalised brass for fastening to the floor and to the underside of the chair.The 25 mm wide, black strap with a length of 1.5 metres is pulled through these. The strap is tensioned and secured via the stainless steel clamp lock.You can find the exact dimensions under ‘Downloads’.
Chair lashing for securely fastening a chair to the floor so that it does not slide around uncontrollably even when the boat is moving heavily.The chair lashing consists of fittings made of matt chrome-plated, trowalised brass for fastening to the floor and to the underside of the chair.It can be tensioned and secured using either a tensioning screw or a chain (7 or 10 links) on a spring.All three versions of the chair lashing are also available in polished brass or bright chrome-plated brass. Please ask us about them.
Strong corner fitting of cast brass. Straight sides.Polished exterior.
Strong cast brass corner castings, polished on the outside.Corner brace (Sea-chest brace) with additional cover.
Strong, functional locker handle (sea-chest handle) for heavy sea and shipping crates. Stainless steel with matt finish. Weight: 176 g.
Strong cast brass corner fitting, polished finish.Corner brace in which the cover is a swung corner arc.Hole countersunk.
Strong corner fittings made of A2 stainless steel (AISI 304), industrially polished.Straight legs, material thickness 2 mm, four countersunk holes.
