Below deck fresh air and plenty of light are the keys to good living comfort. On vertical surfaces such as the sides of the superstructure or the hull, openable ship windows like round, square or oval portlights are suitable for installation. If possible, they also offer a good view outside. Deck prisms or deck melons made of massive glass are deck lights that are used with frames. They provide very good light output. Due to their high degree of light diffusion, they are suitable for letting daylight into the darkest corners of the cabin. Openable deck hatches are usually installed on deck horizontally or as a skylight on superstructures. They can also be used as an exit or escape hatch. The size of the hatches provides plenty of light and ventilation. To prevent breakage, they can be fitted with safety bars or rods. All boat windows have one thing in common - they have to be leak-proof and should not allow water to get inside, even when sailing in bad weather. In addition to professional installation, this will mainly be achieved by using appropriate sealing tapes and sponge rubbers. The Toplicht product range also includes a large selection of stylish, classic ship hatches with frames made of bronze or brass.
- Rigg & sail
- Rope & cordage
- Anchoring & mooring
-
Hull & deck
- Sheet winches & halyard winches
- Cleats, clutches & CLAMCLEAT
- Tracks & slides
- Chain plates & stemhead fittings
- Pad eyes & fairleads
- Hooks & eyelets
- Hand rails
- Flags & flagstaffs
- Portlights & hatches
- Ventilation
- Steering wheels, tillers & rudders
- Specialities for motorboats
- Dinghys & rowboats
- Letters & plates
- Navigation lights
- Outdoor lights & deck spots
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Portlights & hatches
Deck lights from DAVEY in London, for installation in thin wooden, steel or aluminium decks. The deck frame is a round box profile into which the glass body is inserted from above with sealing compound. Available in bronze and stainless steel.Matching glass body without recess in classic bullseye shape or as a lemon.Caution: The distance between the glass and fixtures below deck must be at least 600 mm, as it acts like a burning glass.T
The DAVEY deck light is designed for installation in thicker traditional wooden decks: The glass body is inserted directly into the appropriate cut-out in the deck and sealed in, a small recess on the top of the glass allows a frame to be fitted precisely. The frames are made of bronze or stainless steel.Manufactured by the traditional British company DAVEY London.Glass body in a classically beautiful shape that achieves exceptionally good light diffusion. The traditional method of illuminating rooms below deck effectively and comfortably with daylight.The DAVEY deck prisms and cover frames are not supplied together, but must be ordered separately.The dimensions of these cast products may vary slightly.For installation in thinner decks (plywood or metal), we recommend the prisms with installation frame.
The DAVEY deck light is designed for installation in thicker traditional wooden decks: The glass body is inserted directly into the appropriate cut-out in the deck and sealed in, a small recess on the top of the round glass allows a deck light ring to be fitted precisely. The rings are made of bronze or stainless steel.Manufactured by the traditional British company DAVEY London.Glass body in a classically beautiful shape that achieves exceptionally good light diffusion. The traditional method of illuminating rooms below deck effectively and comfortably with daylight.The DAVEY deck prisms and cover rings are not supplied together, but must be ordered separately.The dimensions of these cast products may vary slightly.For installation in thinner decks (plywood or metal), we recommend the prisms with installation frame.Translated with DeepL.com (free version)
The DAVEY deck light is designed for installation in thicker traditional wooden decks: The glass body is inserted directly into the appropriate cut-out in the deck and sealed in, a small recess on the top of the round glass allows a deck light ring to be fitted precisely. The rings are made of bronze or stainless steel.Manufactured by the traditional British company DAVEY London.Glass body in a classically beautiful shape that achieves exceptionally good light diffusion. The traditional method of illuminating rooms below deck effectively and comfortably with daylight.The DAVEY deck prisms and cover rings are not supplied together, but must be ordered separately.The dimensions of these cast products may vary slightly.For installation in thinner decks (plywood or metal), we recommend the prisms with installation frame.
The DAVEY deck light is designed for installation in thicker traditional wooden decks: The glass body is inserted directly into the appropriate cut-out in the deck and sealed in, a small recess on the top of the glass allows a frame to be fitted precisely. The frames are made of bronze or stainless steel.Manufactured by the traditional British company DAVEY London.Glass body in a classically beautiful shape that achieves exceptionally good light diffusion. The traditional method of illuminating rooms below deck effectively and comfortably with daylight.The DAVEY deck prisms and cover frames are not supplied together, but must be ordered separately.The dimensions of these cast products may vary slightly.For installation in thinner decks (plywood or metal), we recommend the prisms with installation frame.
These DAVEY deck lights are designed for installation in thicker traditional wooden decks: The glass body is inserted directly into the matching cut-out in the deck and sealed in, a small recess on the top of the lemon allows a deck light ring to be fitted precisely. The rings are made of bronze or stainless steel. Manufactured by the traditional British company DAVEY London.A flat glass prism or the ‘melon’ is available. The ‘melon’ prism from DAVEY is a solid glass body in a classically beautiful shape that achieves exceptionally good light diffusion. The traditional method of illuminating rooms below deck effectively and cosily with daylight.The dimensions of these cast products may vary slightly.The DAVEY cover prisms and cover rings are not supplied together, but must be ordered separately.Caution: The distance between the melon and fixtures below deck must be at least 600 mm, as it acts like a burning glass.
Round deck light with polished cast bronze mounting frame. Particularly suitable for thin decks made of GRP, plywood or metal. The round ring-shaped ribbed glass (without recess) provides plenty of light below deck thanks to the prismatic light diffusion.With the special ring-shaped bronze installation profile frame, the glass is also held securely in thinner wooden decks. It is inserted from above with sealing compound.Glass body and mounting frame must be ordered separately.
The DAVEY deck light is designed for installation in thicker traditional wooden decks: The glass body is inserted directly into the appropriate cut-out in the deck and sealed in, a small recess on the top of the glass allows a frame to be fitted precisely. The frames are made of bronze or stainless steel.Manufactured by the traditional British company DAVEY London.Glass body in a classically beautiful shape that achieves exceptionally good light diffusion. The traditional method of illuminating rooms below deck effectively and comfortably with daylight.The DAVEY deck prisms and cover frames are not supplied together, but must be ordered separately.The dimensions of these cast products may vary slightly.For installation in thinner decks (plywood or metal), we recommend the prisms with installation frame.
Deck lights from DAVEY in London, with robust mounting frame made of polished cast bronze. Particularly suitable for thin decks made of GRP, plywood or metal. The ribbed glass provides plenty of light below deck thanks to the prismatic light diffusion.With the special bronze mounting profile frame, the glass is also held securely in place in thinner wooden decks. It is inserted from above with sealing compound.The glass body and mounting frame must be ordered separately.
Rectangular deck light from the traditional London-based manufacturer DAVEY, designed for use with deep frames for installation in decks of limited thickness, such as those made of fiberglass, plywood, or metal. The glass provides plenty of light below deck thanks to its prismatic light diffusion.The special mounting profile frame/deep frame ensures the glass remains secure even in thinner wooden decks. It is installed from above using sealant.PLEASE NOTE: DAVEY has changed the thickness of the glass overhang that is inserted into the profile frame for this product from 19 mm to 24 mm. This means that this skylight is not compatible with older DAVEY profile frames, which were designed for 19 mm glass.
Deck lights from DAVEY in London, with robust mounting frame made of polished cast bronze. Particularly suitable for thin decks made of GRP, plywood or metal. The ribbed glass provides plenty of light below deck thanks to the prismatic light diffusion.With the special bronze mounting profile frame, the glass is also held securely in place in thinner wooden decks. It is inserted from above with sealing compound.The glass body and mounting frame must be ordered separately.
Deck lights from DAVEY in London, for installation in thin wooden, steel or aluminum decks. Suitable for glass "Bulls Eye" bodies without recess in flat form. The deck frame is a round box profile into which the glass body is inserted from above with sealing compound. Available in polished bronze or chrome-plated and polished stainless steel.Caution: The glass must be at least 600 mm away from fixtures below deck, as it can act as a burning glass.The items shown must be ordered separately.
Brass port, polished or chromed finish, with a mounting depth of 50 mm.Comes ready for installation, complete with matching sleeve screws and outer ring.Use: boatbuilding (only in protected areas of the boat, see CE certificate), decoration and interior building - not intended for the outer hull of a seagoing boat.An inexpensive, but nevertheless functional port! Design with hardened glass.Not CE certified.
Round brass port, polished or chromed finish. Equipped with Plexiglas (PMMA glass).These ports are not only useful in boatbuilding - the Plexiglas design is CE certified - but also for many other applications in decoration and interior design.A simple and inexpensive port with high functionality.Comes ready to install and drilled, with matching backing ring for the outside.Spare parts, such as gaskets, bow nuts, etc., are available.CE certification: catagory A to D, area I, III, IV.
Brass portlight frame, polished or chromed, round design, with screw holes, without glass.
Built from solid seawater-resistant cast bronze.All visible parts are hand polished.These opening ports can be screwed in from the inside and come complete with the appropriate outside finishing rings. Break-resistant, strengthened glass.CE certification is for use in the upper hull and cabin sides (Design category A through D, areas IIb, III, IV).Matching fixed ports, whose glass and total thickness are equal to those of these DAVEY ports, are also available.Thus it is possible to position opening and fixed ports next to each other without compromising appearance (See Article-No. 1039-...). Also available are fitting fly screens, where the form fits exactly to the shape of the ports.
Polished bronze portlight frames, oval design, drilled, without glass.
CE-certified portlights (bulls eyes), anufactured from solid seawater-resistant cast bronze. All visible surfaces are hand-polished. The glass is break-resistant and strengthened tempered.These opening ports can be screwed in from the inside and come complete with the appropriate outside finishing rings. The frames and finishing rings are pre-drilled and can be through-bolted or screwed into place.The matching DAVEY fixed ports (Article-No. 1036-...) are also available and have the same glass and total thickness. Thus it's possible to mount them next to each other without compromising appearance. (see similar products).These opening ports are CE certified (Design category A through D, areas II, III, IV).
CE-certified fixed portlights of medium strenght from the British manufacturer DAVEY.Molded from seawater-resistant bronze and hand-polished.Break-resistant, strengthened glass. Comes complete with the appropriate outside finishing rings. The frame and ring come pre-drilled.All visible parts are polished.It is possible to install fixed and opening ports (Article-No. 1035-...) next to each other without compromising appearance. These fixed ports are CE certified (Design category A through D, areas II, III, IV).
Manufactured from seawater-resistant cast bronze.All visible surfaces are hand-polished.Resistant strengthened glass.The windows come complete with the appropriate outside finishing rings.These fixed ports look like the opening ports Article-No. 1033-.... and can be installed in combination with them. CE certification (Design category A through D, areas IIb, III, IV).
Solid non-opening round port.Cast bronze frame, tumbled matt finish.The pane, made of hardened safety glass, is installed from the outside and sealed with silicone. Thus this port is also appropriate for horizontal applications because water cannot collect in the frame.The frame comes drilled with 5 mm countersunk fastener holes.Glass depth 5 mm.
High quality port of cast marine bronze.Tumbled matt finish. Classic rectangular shape.Opens. Locks with a strong bronze turning nuts.The ports are intended to be installed from the inside.Frame and outer ring are pre-drilled with countersunk holes D = 5 mm.Comes complete with matching outer ring.The large depth of the port allows installation in all-wood cabintops. The neoprene - soft rubber gasket - around the rim ensures a perfect seal.The hardened safety glass is sealed to the frame with silicone. Excellent detail: Drainage channels are built into the frame. Thus even when the ports are open, no saltwater can get in. All ports come complete with removeable bronze-coloured-plasic screens. Replacement parts for these quality ports, including seals, screws and bronze turning nuts, available.Made by the American traditional manufacturer SPARTAN.
High-quality yacht window made of cast marine bronze. Matt tumbled surface. Long oval classic shape. Made by the traditional American manufacturer SPARTAN.The window can be opened. It is closed with strong bronze knurled nuts.The windows are intended for installation from the inside. Frame and outer ring are already provided with countersunk holes (D = 5 mm). Supplied complete with matching outer ring. The large web depth also allows installation in solid wood structures.The neoprene soft rubber cord glued into the frame ensures perfect tightness. The tempered safety glass is sealed into the frame with silicone.A special design feature of SPARTAN windows: drainage channels are incorporated into the web of the frame. Therefore, when the window is opened, no (salty) dripping water can get inside.Each window comes with a removable insect screen made of bronze-coloured plastic.The long-oval fixed windows (see "similar products" below) from SPARTAN have the same glass and external dimensions and fit these ship windows exactly.
Solid non-opening port.Classic long-oval shape.Cast bronze frame, tumbled matt finish.The pane, made of hardened safety glass, is installed from the outside and sealed with silicone. Thus this port is also appropriate for horizontal applications because water cannot collect in the frame.The frame comes drilled with 5 mm countersunk fastener holes.Glass depth 6 mm.Matches the long-oval opening ports from the American manufacturer SPARTAN.
High quality port of cast marine bronze,tumbled matte finish.Clasic short-oval shape.The ports are intended to be installed from the inside.Frame and outer ring are pre-drilled with countersunk holes D = 5 mm.Comes complete with matching outer ring.The large depth of the port allows installation in all-wood cabintops. The neoprene - soft rubber gasket - around the rim ensures a perfect seal.The hardened safety glass is sealed to the frame with silicone. Excellent detail: Drainage channels are built into the frame. Thus even when the ports get opened, no saltwater can get in. All ports come complete with removeable bronze-coloured-plasic screens. Replacement parts for these quality ports, including seals, screws and bronze turning nuts, available. Matching are the oval fixed ports. Made by the American traditional manufacturer SPARTAN.
Mid-weight design of brass or chromed brass.Installed from inside, with soft-rubber seal. Comes compete with matching backing ring for the exterior. Good water-tightness through adjustable hinge bolts and snap-in, adjustable toggle locks.Because of its large depth, well suited to wood cabintops.Thickness of glass: 6 mm.
Small polished or chromed-brass port.Design comes with glass.Weight: approx. 1.7 kg.Shipment with backing ring and sleeve bolts.Also comes in a CE-certified design (CE-category A to D, areas I, III, IV) with Plexiglas.
Mid-weight quality to be installed from inside.Polished brass.Design comes with glass window. Comes compete with matching backing ring for the exterior and sleeve bolts. Available in two depths (S). CE-certified version with plexiglass available on request.
Light-quality port of brass or chromed brass to be installed from inside.Comes complete with matching outer ring, drilled.With soft-rubber seal.Comes with glass window.Weight: 5 kg.Also available in CE-certified (CE-category A to D, Areas I, III, IV) design with plexiglass (PMMA-Glass).
Portlights of (ellipsoidal) oval shape. Polished or chromed brass. Installation from outside.The frame for this port is installed in the cabintop from the outside, which gives it a smooth look.A good seal is achieved through the port's adjustable hinge bolts, as well as adjustable snap-in locking knobs.Comes complete with matching backing ring and sleeved screws.Ideally suited to cabintop thicknesses of about 18 mm.
Polished or chromed brass port, with a mounting depth of 50 mm.Comes ready for installation, with matching sleeve bolts and outer ring.Use: boatbuilding (only in protected areas of the boat, see CE certificate), decoration and interior building - not accredited for the outer hull of a seagoing boat.An inexpensive, but nevertheless functional port!Design with plexiglass (PMMA).CE certificate: category A to D, area III.
Heavy trapezoidal brass deck hatch, with a polished or chromed surface.Comes with fitted safety bars.All pieces are made from strong precision-cast brass.The folding frame opens to variable heights employing two hinges that can be operated single handed, and closes to a water-proof and burglar-proof state using two folding locks.Watertight seal of soft sponge rubber.The mounting frame - drilled to a depth of 12mm - must be lined on decks with camber or sheer.The hatches come with hardened safety glass (depth 5 mm).Trapezoidal form with safety bars. Radius (r) of corners = 85 mm.Weight 9,0 kg.Also available with UV-resistant Plexiglas.
Wind scoop made from colored spinnaker cloth.Dimensions: Height 1.80 m, bottom-edge length 47 cm.Comes with nylon stuff sack.Wind scoops are attached to deck hatches to bring fresh air below and improve airflow throughout the cabin.This scoop will follow the wind direction by itself.
Spare parts for heavy-duty hatches Art-Nr. 1734-... and 1744-... Avaialble are friction-dampening supports and special hinges. Brass or chromed finish. Also available: matching rubber seals and spare window panes.
A mosquito net for hatches of all standard sizes and brands. It is tight enough to protect against even the smallest insects (midges, sand flies, sand fleas, mosquitoes, wasps, etc.). Nevertheless, it allows good ventilation.The net has a thin, chrome-plated and foldable steel frame that keeps it under tension and expands it. When folded, it fits into a small bag and can be easily stowed away (‘pop-up’).The grille is attached to the hatch from the inside with a magnet or suction cup. For attachment using magnets, a small metal plate is attached to the inside of the hatch with double-sided adhesive tape (included in the delivery). The suction cup can be attached directly to glass. A small pull cord is used to tension the grille against the hatch frame and keep it taut - no matter how wide the hatch is open.The grille simply needs to be larger than the inside opening of the hatch so that no slit is created. The shape of the hatch does not matter: square, rectangular or round.1316-400: Outer dimensions 350x350mm (14‘ x 14’), fits all hatches with an opening <300x300mm (12‘ x 12’).1316-600: External dimensions 600x600mm (24‘ x 24’), fits all hatches with an opening <520x520mm (20‘ x 20’).1316-800: External dimensions 800x800mm (31‘ x 31’), fits all hatches with an opening <720x720mm (28‘ x 28’).Fastening takes a few seconds. Supplied with all necessary mounting materials and a storage bag.Colour: black.
Heavy square brass deck hatches, with a polished or chromed finish.Comes with fitted safety bars.All parts are made from strong precision-cast brass.The folding frame opens to variable heights employing two hinges that can be operated single handed, and closes to a water-proof and burglar-proof state using two folding locks.Watertight seal of soft sponge rubber.The mounting frame - drilled to a depth of 12 mm - must be lined on decks with camber or sheer.The hatches come with hardened safety glass (depth 5 mm).Square shape with safety bars.Also available with UV-resistant Plexiglas.
Heavy square brass deck hatch, with a polished or chromed surface.Comes with attached safety bars., alternatively without safety bars and with a latch that can be opened from the inside or outside (emergency exit as required by the CE).All pieces are made from strong precision-cast brass.The folding frame opens to variable heights employing two hatch stays that can be operated single-handed.Locking:Hatch with safety bars closes with two fasteners from inside, Hatch without bars with locking mechanism to be operated from inside or outside.Watertight seal of soft sponge rubber.The mounting frame -- drilled to a depth of 12mm -- must be lined on decks with camber or sheer.The hatches come with hardened UV-resistant Plexiglas (CE certified for design categories A to D, Area II), 5 mm thick.Square form.Also available with hardened safety glass.
Heavy trapezoidal brass deck hatch, with a polished or chromed surface.Comes with fitted safety bars, alternatively without safety bars and with a latch that can be opened from the inside or outside (emergency exit as required by the CE).All pieces are made from strong precision-cast brass.The folding frame opens to variable heights employing two hinges that can be operated single-handed and closes to a water-proof and burglar-proof state using two folding locks.Watertight seal of soft sponge rubber.The mounting frame - drilled to a depth of 12 mm - must be lined on decks with camber or sheer.The hatches come with hardened UV-resistant Plexiglas (CE certified for design categories A to D, Area II), depth 5 mm.Trapezoidal form.Measurments:D1 mm = 400 x 400/352, D2 mm = 435 x435/395, D3 mm = 490 x 490/450 Radius (r) of corners = 85 mm.Also available with hardened safety glass.
Simple protection against mosquitoes and flies: the Throw-Over Mosquito Net for boat hatches. A sewn-in lead tape on the edge serves as a weight and prevents the net from being blown away in the wind. Can be easily attached to hatches with roller blinds where other nets do not fit. The net is supplied in a storage bag. Available in three sizes.
Functional jackscrew stay for medium heavy skylights:by turning the handle a counter rotating jackscrew is extended;it gives good opening heights in spite of the short construction length.The fittings can be separated from the jackscrew at the top and at the bottom with a simple movement in case the window has to be opened wide in case of an emergency. Made in the Netherlands from solid brass, surface matt finished brassor chromed. Base plates 50 x 20 mm, jackscrew D = 19 mm.
A lightweight hatch lifter with knurled screw.Can also be used as a cabinet hinge.Made of profiled brass with a polished, chrome-plated or matt chrome-plated surface, or of A4 stainless steel (matt surface).The 4085-966 lifter stand has a snap-in mechanism that allows it to be set up quickly.
Small two-part latch with secured wing nut and backing plate. Polished or chrome plated brass.
Hanging chain for ports and blinds. Weight: 80 g. Available in brass or chromed brass.
Hatch fastener, confirming to DIN 83407 Form A. Included: eye screw and nut made from stainless steel, steel welded plate, stainless steel bolts, and copper cotter pin.
Rolled or chromed brass. The lock rod is spring-loaded and when released stays upright on the plate. Thus the window can be opened and closed unhindered.
Brass hatch arm, with bar and rounded locking screw.The rod has 3 notches for better fixing.They come in pairs.
Telescoping hatch opener with straight rod and brass locking wheel.Made from brass, surface polished or chrome plated.Long or short version.Choose left or right version.
Made of brass. Surface polished, chromed or matt chromed. With knurled screws and forked backing plate.
Telescopic gas pressure spring to open, close, lift, lower, dampen or adjust the opening of hatches, skylights, portholes, covers or windows. The cylinder has a diameter of 18 mm, the piston rod has a diameter of 8 mm.Different brackets are available for mounting. Mounting is very simple: the ends of the gas spring are snapped onto the heads of the brackets.
For skylights, locker seat and hatches: a strong stainless steel spring keeps the cover automatically open after lifting. A light squeeze sidewise is sufficient for closing.The large spring is equipped with black plastic mounts with four 5 mm bore holes, the 2 smaller springs with mounts from stainless steel with 2 mounting holes each.
Hatch fastener, pursuant to DIN 83407 Form A. Included: brass eye screw and nut, steel welded plate, stainless steel bolts, and copper cotter pin.
Light brass or chromed-brass design. This hatch fastener works like a frictional damper; By moving the practical handle the friction on the telescoping arm can be set at any height.Mounting plate 22 x 47 mm.
With offset turning handle. Brass, with a polished, chromed or matte-chromed finish. Comes in right or left designs, complete with striking plate (70 x 22 mm). Base plate size 65 x 21 mm, lever length 95 mm.
Hatch opener, straight bar, with 12 grit for fixing the brass knurled screws.Available in polished or chromed brass.
This hatch latch is screwed to the hatch from the inside and acts as a threaded fastener with the knurled head screw - the hatch can be pulled to the frame in a regulated fashion.Dimensions:Spindle M8 Spindle length 60 mmShipping with opposite angle.
Heavy-duty catch for windows, doors or hatches, made of brass with a rolled or chrome-plated surface.The fitting consists of a base plate, bolt, cage nut and copper cotter pin. A push fork is available as a counterpart.
Lipped plate, to match the folding closure 1857-... Rolled brass or chrome plated.
Square hard rubber cord with a shore hardness of 50° to 60° made of black EPDM rubber. This universal seal is suitable for re-sealing for portholes, ship windows or hatches.Supplied by the meter.
Rectangular hard rubber cord with a shore hardness of 70° made of black EPDM rubber. This universal seal is suitable for re-sealing for portholes, ship windows or hatches.Supplied by the meter.
Sponge rubber round cord made of black EPDM rubber. This universal seal is suitable for re-sealing portholes, ship windows or hatches. Supplied by the meter.
Self-adhesive foam rubber band for the simple, practical sealing of hatches and seat lockers, to mount deck fittings and clamps and for the fitting of windows.Colour: black.
Rectangular gasket made of black EPDM rubber. This universal seal is suitable for re-sealing portholes, ship windows or hatches.Supplied by the meter.
Square gasket made of light gray sponge rubber. This universal seal is suitable for re-sealing for portholes, ship windows or hatches.Supplied in lengths of 50 cm.
Trapezoidal hard rubber cord with a shore hardness of 50° to 60° made of black SBR rubber. This universal seal is suitable for re-sealing for portholes, ship windows or hatches.Supplied by the meter.
Drip pan to catch the condensation drips under bull's-eyes.Made from cast bronze, polished or chromed.All visible surfaces are neatly polished.The traditional design is borrowed from the professional maritime industry.The long hanging holes allow for simple emptying.
Flange and cover with O-ring seal.Polished A4 stainless steel finish.A spring clip key for opening and closing is available as an accessory.
Sturdy deck plate made of bronze with brushed or chrome-plated surface. Suitable as a classic deck filler. Large versions can also be used as a deck opening for the passage of crane gear for ships with inboard hot eyes or as a mounting flange for cowls.The deck plate is fitted with an O-ring seal and can be sealed tightly. The internal thread (BSP) runs through the entire opening so that corresponding fittings with an external thread can be screwed in on the underside.Cover versions either with slot or with two recessed holes Ø 5mm (see table). Suitable keys for opening are available under accessories & spare parts.
Watertight inspection cover, lightweight design. With O-ring seal, for screwing on.Made from polypropylene plastic. Available in black or white.
Made of polished brass. Ring with 6 countersunk holes. Lid closes with a wide contact surface without a seal.
Strong (5 mm thick) and absolutely watertight locker door made of plastic for drinking water tanks or storage rooms. Optionally in black or transparent.The red pressure ring with 8 grip ribs allows a perfect sealing of the lid without twisting or damaging the O-ring seal (nitrile rubber).The Locker door is suitable for an internal pressure of max. 0.45 bar and approved for lifeboats.Light inner diameter: 180 mmInstallation diameter: 190 mmOutside diameter: 235 mmThe sealing O-ring in the lid is available as a spare part (‘Service Kit’, article no. 4634-104).
Strong inspection hatch with toggle closure, impermeable to splash-water and made from white plastic.
Sturdy cast bronze deck lock with polished surface. Supplied with an attractive key. Made by the traditional manufacturer DAVEY.Technical features:BSP thread 3"/75 mmDiameter 120 mmDAVEY no. 2430/GM/075
