- Rigg & sail
- Rope & cordage
- Anchoring & mooring
-
Hull & deck
- Sheet winches & halyard winches
- Cleats, clutches & CLAMCLEAT
- Tracks & slides
- Chain plates & stemhead fittings
- Pad eyes & fairleads
- Hooks & eyelets
- Hand rails
- Flags & flagstaffs
- Portlights & hatches
- Ventilation
- Steering wheels, tillers & rudders
- Specialities for motorboats
- Dinghys & rowboats
- Letters & plates
- Navigation lights
- Outdoor lights & deck spots
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Hatch holder stainless steel
The large spring is equipped with black plastic mounts with four 5 mm bore holes, the 2 smaller springs with mounts from stainless steel with 2 mounting holes each.
from €17.95*
€17.95
Prices incl. VAT plus shipping costs
| Art. No. | L (mm) | Ø (mm) | wire-Ø (mm) | L1 (mm) | B1 (mm) | L2 (mm) | B2 (mm) | weight (g) | Unit price | Delivery time | Note list | Buy |
|---|
Description
For skylights, locker seat and hatches: a strong stainless steel spring keeps the cover automatically open after lifting. A light squeeze sidewise is sufficient for closing.
The large spring is equipped with black plastic mounts with four 5 mm bore holes, the 2 smaller springs with mounts from stainless steel with 2 mounting holes each.
Hatch fastener, pursuant to DIN 83407 Form A. Included: brass eye screw and nut, steel welded plate, stainless steel bolts, and copper cotter pin.
Heavy-duty catch for windows, doors or hatches, made of brass with a rolled or chrome-plated surface.The fitting consists of a base plate, bolt, cage nut and copper cotter pin. A push fork is available as a counterpart.
Lipped plate, to match the folding closure 1857-... Rolled brass or chrome plated.
Polished brass porthole hanger. Fixes the open portlight or the cover.Base plate and holding bar must be ordered separately.Base plate 45 x 25 mm.Comes without portlight.
This lockable safety pin enables the unattended venting.Suitable for our window stay with article no. 4095-...Made of polished or chromed brass.
Hanging chain for ports and blinds. Weight: 80 g. Available in brass or chromed brass.
Steel pressure fork for welding, pursuant to DIN 83407, Form C.Matches hatch fasteners.
Telescopic gas pressure spring to open, close, lift, lower, dampen or adjust the opening of hatches, skylights, portholes, covers or windows. The cylinder has a diameter of 18 mm, the piston rod has a diameter of 8 mm.Different brackets are available for mounting. Mounting is very simple: the ends of the gas spring are snapped onto the heads of the brackets.
Rolled or chromed brass. The lock rod is spring-loaded and when released stays upright on the plate. Thus the window can be opened and closed unhindered.
Hatch fastener for windows and small skylights, neatly crafted with a robust milled screw.Made from hand polished brass.The locking rod will be secured in the relevant position with a spring.
For skylights, locker seat and hatches: a strong stainless steel spring keeps the cover automatically open after lifting. A light squeeze sidewise is sufficient for closing.The large spring is equipped with black plastic mounts with four 5 mm bore holes, the 2 smaller springs with mounts from stainless steel with 2 mounting holes each.
This hatch latch is screwed to the hatch from the inside and acts as a threaded fastener with the knurled head screw - the hatch can be pulled to the frame in a regulated fashion.Dimensions:Spindle M8 Spindle length 60 mmShipping with opposite angle.
A lightweight hatch lifter with knurled screw.Can also be used as a cabinet hinge.Made of profiled brass with a polished, chrome-plated or matt chrome-plated surface, or of A4 stainless steel (matt surface).The 4085-966 lifter stand has a snap-in mechanism that allows it to be set up quickly.
Small two-part latch with secured wing nut and backing plate. Polished or chrome plated brass.
Strong and shapely two-part latch with wing nut and backing plate for hatches and windows made from bronze.
Made of brass. Surface polished, chromed or matt chromed. With knurled screws and forked backing plate.
Hatch fastener, bent smooth bar. With a strong brass tommy screw, it is possible to secure the hatch in any position. A small knurled screw on the end of the rod acts as a stop and allows the hatch to be opened all the way. Available in polished or chromed brass.
Strong hatch lifter with tommy screw for securing.The slightly bent bar has grit to engage the t-screw. Polished brass design.
Particularly beautiful hatch opener. Rod of extra-hard bronze, fitting of cast brass. With the strong cast tommy screw, the hatch can be fixed at any height on the straight rod.Hand-polished classic design.Mounting plate 40 x 115 mm.Available in two sizes.
Hatch opener, straight bar, with 12 grit for fixing the brass knurled screws.Available in polished or chromed brass.
This traditional skylight crank opener allows even very heavy ports or skylights to be opened. It holds the port in any desired position.Made of polished brass.An exceptionally beautiful and functional fitting.The opener can be unhooked from the base fitting.Dimensions:Plate 120 x 95 mm,Tube diameter = 32 mm,Hand crank diameter = 140 mm.
Functional jackscrew stay for medium heavy skylights:by turning the handle a counter rotating jackscrew is extended;it gives good opening heights in spite of the short construction length.The fittings can be separated from the jackscrew at the top and at the bottom with a simple movement in case the window has to be opened wide in case of an emergency. Made in the Netherlands from solid brass, surface matt finished brassor chromed. Base plates 50 x 20 mm, jackscrew D = 19 mm.
Brass port opener.Polished or chromed finish.Functionality: The port opener works like a friction damper; when a strong union nut is adjusted, the telescoping arm can be set and stopped at any height by friction.Available in different sizes.
Hatch fastener, confirming to DIN 83407 Form A. Included: eye screw and nut made from stainless steel, steel welded plate, stainless steel bolts, and copper cotter pin.
