3M particle masks stand for comfort, safety and maximum performance. The 3M patented Cool Flow valve facilitates exhalation and prevents a heat accumulation under the mask. The mask corresponds to filter class FF-P2 and protects in accordance with EN 149 filter classification.
FF-P1 and P2 fine dust masks with exhalation valve.Protection from nonpoisonous fine dust, particles and fibres, skin friendly and light material, built-in nose clip, comfortable to wear, one size fits all. The fine dust masks conform to EN 149.
The SUNDSTRÖM SR 900 is a completely system where the user can easily customize the product based on site requirement and needs. Characteristics: An excellent fit with superior wearers comfort. Double molded TPE/PP with a detachable filter holder to allow future accessories to expand the system. Three sizes (Large, Medium, Small) available to ensure the best possible fit. Low weight. Soft/durable TPE with wide face seal surfaces provides a high level of protection. Elasticated, easily adjustable head harness with large crown plate for a comfortable secure fit. Extremely low inhalation and exhalation resistance reduces wearer fatigue. Supplied with pre filter holder allowing you to check face seal before and during work. Range of accessories and service kits available. The same filter system for all negative pressure half- and full face masks.
Accessories for SUNDSTROEM breathing masks.Sundström Filters:Prefilter: Filters large dust and protects the more sensitive particle and gas filters. Can also be used as a filter for removing large dust particles. Comes in packages of 5.Particle filter P2: Protects against dangerous dust and mist.Particle filter P3: Protects against poisonous dust and mist.Gasfilter A1 :Protects against organic fumes, for example, small concentrations of solvents (up to 1000 ppm).Gasfilter A2 : Protects against organic fumes, for example, solvents up to 5000 ppm, with boiling points above 65°C. Gasfilter ABE1: Protects against organic compounds with a boiling point above 65°C, inorganic and acid gases/vapours.Gasfilter ABEK1: Protects against the same pollutant types as gas filter SR 315, and also against ammonia.Gasfilter AX:protects against organic compounds with a boiling point equal to or lower than 65°C.Combination filter ABEK1-Hg-P3-R: protects against organic compounds with a boiling point above 65°C, inorganic and acid gases/vapours, ammonia, mercury vapour and all types of particles. When ordering, please place all detailed information under "Downloads & Information", or submit our "Info 44"!
Efficient one way paint mask and respirator mask as double filter half mask equipped with two filter units FF-A2/P2.The masks protect reliably from dust, solvents and organic vapours.The skin friendly and maintenance free mask made from rubber is light and comfortable to wear.Shipping in a lockable storage bag.
Storage bag made of PVC coated nylon intended for SUNDSTRÖM half mask with one filter. The bag is closed with a Velcro and can be attached to a belt. Color: black with orange lid and reflective tape.
A remote filter holder system carried on your back is connected to the protective face mask SUNDSTRÖM SR 900 with the help of twin tubes for highest comfort at work or when wearing visors. In this way the filters are far removed from the face and the direct working area and therefore longer usable. Remote filter holder system set: 1 x SR 905 filter holder system carried on your back and belt, 1 x twin tube SR952 and protective shell, 1 x steel net disc.
The SUNDSTRÖM SR 200 full mask is made from skin-friendly silicone rubber, with a double exhale vent and headbands with quick adjustors. These full masks are intended for professional continuous use. The professional dust and gas masks from SUNDSTRÖM of skin-friendly rubber with wide headbands offer the best comfort and have low respiratory resistance. The combined filter system offers extensive protection against poisonous dust, gas and vapors. All filters can be combined with all masks.
The SR 336 Steel net disc consists of a disc punched out of stainless steel mesh. The disc is fitted at the bottom of the pre-filter holder of the mask and protects the filters against sparks and spatter that occurs during welding, flame cutting, grinding and similar work. Diameter: 102 mm
The large storage box SUNDSTRÖM SR 344 is for stationary Storage of larger respiratory protection provided, for example for the full mask SR 200 with filter and accessories. The lid is closed with two clips. Dimensions: 345 x 160 x 225 mm. Volume: approx. 8 liters. Weight: 445 g.
Storage box SUNDSTRÖM SR 230 intended for a half mask with filter. The box is equipped with a belt and can also be attached to the trouser belt. Dimensions: 170 x 170 x 195 mm Volume: approx. 3.3 liters Weight: 260 g
SR 100 is made of silicone and is available in two sizes, S/M and M/L. The mask is equipped with two exhalation valves, which ensures very low exhalation resistance. Valve covers with baffles effectively protect the exhalation membrane against dust and paint mist. The easily adjustable elastic head harness of the mask is designed as a V-shaped loop and has a large, dished crown plate, which contributes towards a comfortable and secure fit. The combined filter system offers extensive protection against poisonous dust, gas and vapors. All filters can be combined with all masks.