Straight chain inlet, made of heavy hand polished cast brass.The cover is loose with a slot for the chain and an attachment eye for a safety chain or safety lanyard.The deck flange of this hawse has a flat bar for recessing, for a secure fit in the deck.
Large, robust roller fitting from the traditional company DAVEY London for attachment to the bowsprit (1128).The fitting is made of polished gunmetal and is attached to the starboard side of the bowsprit / jib boom. Pre-drilled holes with a diameter of 9 mm are provided for three screws. In addition, the 13 mm bolt extends through the bowsprit and is secured with a washer and nut (both are included in the scope of delivery).The roller has a diameter of 65 mm and is suitable for 8 mm and 10 mm chain.
Chain Pipe (hawsepipe) of bronze, with cover.Screws onto the deck.Classic, oval shape.The cover is secured with a brass chain. Inside the cover is a stainless steel hook, on which the chain end can be hung.Made of cast bronze, matte tumbled.Made in the USA by the traditional manufacturer SPARTAN.
Heavy-duty fitting with chain roller, made of hand-polished bronze by the traditional company DAVEY London (1108). The body is screwed to the side of the stem. Can be mounted on both sides.The axle (bolt) of the roller is also screwed through the stem (complete with washer and nut).
Strong chain pipe of hand-polished cast bronze. Bent shape, slitted cover with hinge, deck flange with a small gutter for a secure sit. A classic design that is a piece of art on every foredeck!
Straight chainpipe of polished bronze for chains 10 - 13mm. Straight functional shape. Loose cover with two different-width slits. Inside, the cover has a strong eye, on which the chain end can be attached. The safety chain is not part of the order. This hawsepipe has a deck flange without gutter and sits on the deck.
Chain pipe of cast brass for vertical or horizontal mounting. The large opening allows the stowage of a small folding anchor or an anchor line. Gutter depth approx. 10 mm. Weight 820 g. Polished or chromed brass.
Large, very robust bow roller fitting from the traditional company DAVEY London (1123).The fitting made of polished cast bronze is placed on the deck and fastened with four screws in pre-drilled holes (diameter 6 mm).A retaining bolt (not included) fits into the upper 5 mm hole to secure the anchor.
A real eye-catcher on the forecastle: classic bow roller fitting for guiding the anchor chain on the stem from the traditional company DAVEY London (1125).Made from cast bronze and hand-polished.Solid bronze chain roller. Strong base plate: The fitting is placed on the deck or on the stem head.