Small sturdy manual windlass LOFRANS ROYAL.Sprocket for chain DIN766 and additionally a lateral shifting capstan.Sprocket and capstan can each be operated separately, which is very effective due to the double-acting drive with the hand spake.Silver-coloured anodised, seawater-resistant aluminium housing with manual chain brake.Maintenance-free due to lifetime lubrication.Supplied with hand spake and fixing material. Features:Working load: 50 kgBreakaway force: 200 kgMaximum tensile force: 400 kgWeight: 9 kg
Heavy and robust two gear anchor winch made from high-strength seawater resistant cast brass for yachts and ships of up to a length of 20 m.The driving mechanism is operated by a strong handle via a mechanical transmission system. This gear drive and all axles are made from stainless steel. In speed gear the hoisting speed is 9 m/min (6,5 double travel per metre).In power gear, the pulling force is doubled, the hoisting speed is reduced to 2,5 m/min (this amounts to 14 double travel per metre).This is achieved by switching one bolt to change the handle unit between speed gear and power gear. A traction force of 500 kg is possible.The solid telescopic handle, made from bronze tubing (diameter 40 mm, total length 0,80 m) also activates the brake nut.On the port side of the winch a strong capstan head (diameter 115 mm) is fitted, which can be used for all kinds of traction work.The powerful body is open on the aft end for maintenance and lubrication.Strong cleat on top of the housing.Weight with handle: 42 kg. Dimensions: base: 307 x 180 mm, overall width: 350 mm, height (with cleat) 265 mm.Available with a chainwheel for DIN 766A chain 10 mm or 13 mm.
Beautiful compact two-gear hand-cranked bronze windlass.Axles, pawls and screws made from stainless steel.The heavy, traditional hand wheel (diameter 300 mm) with swing spokes and large foldable handle makes retrieval easy.Gear changes and uncoupling through shifting the drive axle.Control of the chain while easing comes through use of the foot brake.Pulling force:1st gear: 450 daN2nd gear: 600 daN.Hoisting speed:1st gear: 6 cm / revolution2nd gear: 10 cm / revolution.
Bronze anchor windlass. Solid design for boats up to 15 m.Two-speed bronze hand-operated windlass.Axles, pawls and springs made of stainless steel.The heavy, traditional wheel (d = 300 mm) with swung spokes and large folding turning handle allow easy retrieval.Gear changes and uncoupling through shifting the drive shaft.Band brake with spindle.Pulling force: 1st gear: 450 daN 2nd gear: 600 daN.Hoisting speed:1st gear: 6 cm / revolution2nd gear: 10 cm / revolution.Also available with additional rope / wire drum, which allows it, for example, to be used as a mast-hoisting winch.
Very compact anchor winch made of polished bronze from the Australian manufacturer MUIR, with vertical chain sprocket.The winch is precisely manufactured. The low profile design makes the windlass very light and versatile.Features:Combination chain wheel to retrieve chain (DIN 766A) and rope (8 mm chain/14 mm rope or 10 mm chain/16 mm rope).Chain and cable can be spliced together and retrieved as a single rode.The winches can be used with any standard winch handle (a simple MUIR 8-inch plastic handle comes with the windlass).The chain runs over a conical brake. The chain ejector hinders overrides of chain and rope. Gear ratio 5.5:1.Max. pull 230 kg.Speed 0.36 m/revolution.3-year manufacturer's guarantee.
Very compact anchor winch made of polished bronze from the Australian manufacturer MUIR, with vertical chain sprocket and additional mooring capstan. The capstan can be operated independently of the chain sprocket. The winch is precisely manufactured. The low profile design makes the windlass very light and versatile.Features:Combination chain wheel to retrieve chain (DIN 766A) and rope (8 mm chain/14 mm rope or 10 mm chain/16 mm rope).Chain and cable can be spliced together and retrieved as a single rode.The winches can be used with any standard winch handle (a simple MUIR 8-inch plastic handle comes with the windlass).The chain runs over a conical brake. The chain ejector hinders overrides of chain and rope. Gear ratio 5.5:1.Max. pull 230 kg.Speed 0.36 m/revolution.3-year manufacturer's guarantee.
Traditional, compact and heavy hand windlass.One-speed windlass.Robust, open steel construction with large dimensioned steel axes on industrial antifriction bearings. Large hand wheel with swung spokes, forged capstan and foot brake with strong brake band.The primary axis can be unlinked so that the anchor can be easily and quickly released.Cast-steel chain wheels fit chain that conforms to DIN 766.All pieces are primed twice with rust protectant and painted with industrial paint.A turning handle supported by ball bearings is available (please check "Suitable items" below).Delivery requires 6 weeks.
Traditional, compact and heavy hand-operated windlass.Two gears.Robust, open steel construction with large steel axles in industrial antifriction bearings. Large wheel with swung spokes, forged winch head and strong foot brake.The principal axis can be uncoupled, so that the anchor can be released easily and quickly.Cast-steel chain wheels fit DIN 766 chain.All pieces are primed twice with rust protectant and then painted with industrial laquer.Delivery time: 6 weeks.