-
Rigg & sail
- Blocks & sheaves
- Low friction thimbles & softrigging
- Shackles, carbine hooks & hooks
- Hanks
- Belaying pins
- Mast & boom
- Wind indicators
- Wire rope, thimbles & turnbuckles
- Pins & bolts
- Bosun's chair
- Rigging tools & accessories
- Sailcloth
- SKYLOTEC Mast Access & Fall Protection
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Modern yacht blocks and dinghy blocks
Large sheet block with cam cleat. From the MICRO-XS series by HS.Extremely small, compact, and light ball-bearing block.Well suited for recreational sailors and various industrial applications. The housing of this newest innovation from the yacht fittings source Herm. Sprenger (HS) is made entirely of stainless steel. The black plastic sheave runs on stainless steel ball bearings, which ensures excellent smooth-running characteristics.
Screw-on block/side pulley. From the MICRO-XS series by HS.Extremely small, compact, and light ball-bearing block for recreational sailors and various industrial applications. The housing of this newest innovation from the yacht fittings source Herm. Sprenger (HS) is made of stainless steel. The black plastic sheave runs on stainless steel ball bearings, which ensures excellent smooth-running characteristics.
Deflection pulley. From the MICRO XS series by HS.Extremely small, compact, and light ball-bearing block.Well suited for recreational sailors and various industrial applications. The housing of this newest innovation from the yacht fittings source Herm. Sprenger (HS) is made entirely of stainless steel. The black plastic sheave runs on stainless steel ball bearings, which ensures excellent smooth-running characteristics.
Extremely small, compact and light ball-bearing blocks for daysailers and various other applications.The housing of this newest innovation of the Sauerland yacht-fitting forge Herm. Sprenger (HS) are made of stainless steel.The black plastic single sheave runs on stainless steel ball bearings to ensure the blocks turn easily.
Simple stainless steel block, attaches with pin and ring splint.Without bracket.Sheave of black plastic.
Extremely small, compact and light ball-bearing blocks. Good for daysailers and used in a variety of applications. The housings of these, the newest innovation from the Sauerland-based manufacturer Herm. Sprenger (HS), are finished entirely in stainless steel. The black plastic sheaves run on stainless ball bearings for excellent low-friction performance.
Lead block / sheave pulley from the MICRO XS series made by HS: extremely small, compact and light ball bearing blocks. Well suited for small sailing boats and a number of professional applications.The housings of these, the newest innovation from the Sauerland-based manufacturer Herm. Sprenger (HS), are finished entirely in stainless steel. The black plastic sheaves run on stainless ball bearings for excellent low-friction performance.
Screw-on block with hinge/deflection pulley. From the MICRO-XS series by HS.Extremely small, compact, and light ball-bearing block.Well suited for recreational sailors and various industrial applications. The housing of this newest innovation from the yacht fittings source Herm. Sprenger (HS) is made entirely of stainless steel. The black plastic sheave runs on stainless steel ball bearings, which ensures excellent smooth-running characteristics.
Violin block of the MICRO-XS series by HS.Extremely small, compact, and light ball-bearing block.Well suited for recreational sailors and various industrial applications. The housing of this newest innovation from the yacht fittings source Herm. Sprenger (HS) is made entirely of stainless steel. The black plastic sheave runs on stainless steel ball bearings, which ensures excellent smooth-running characteristics.
Extremely small, compact and light ball-bearing blocks for daysailers and various other applications.The housing of this newest innovation of the Sauerland yacht-fitting forge Herm. Sprenger (HS) are made of stainless steel.The stainless steel sheaves for wire rope of up to 4 mm run on stainless steel ball bearings to ensure the blocks turn easily.More implementations are available on request.
Extremely small, compact and light ball-bearing blocks for daysailers and various other applications.The housing of this newest innovation of the Sauerland yacht-fitting forge Herm. Sprenger (HS) are made of stainless steel.The black plastic double sheaves run on stainless steel ball bearings to ensure the blocks turn easily.
Extremely small, compact and light ball-bearing blocks for daysailers and various other applications.The housing of this newest innovation of the Sauerland yacht-fitting forge Herm. Sprenger (HS) are made of stainless steel.The black plastic triple sheaves run on stainless steel ball bearings to ensure the blocks turn easily.
High-quality double sheave ball-bearing blocks from the manufacturer HERM. SPRENGER.Intended for just about all uses on dinghies, sailing boats, and small yachts.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, a mainsheet in light winds).The ball bearings of the blocks for 8 mm rope have high-quality plastic bearings, while the larger blocks are equipped with stainless steel ball bearings.Simple black housing made from high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The standard block eye is a removable stamped bracket. It can be exchanged for a matching swivel shackle without problems (link below). This way these blocks are very versatile and can be used with very short joints.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
High-quality single sheave ball-bearing blocks from the manufacturer HERM. SPRENGER.Intended for just about all uses on dinghies, sailing boats, and small yachts.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, a mainsheet in light winds).The ball bearings of the blocks for 8 mm rope have high-quality plastic bearings, while the larger blocks are equipped with stainless steel ball bearings.Simple black housing made from high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The standard block eye is a removable stamped bracket. It can be exchanged for a matching swivel shackle without problems (link below). This way these blocks are very versatile and can be used with very short joints.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
SPRENGER Stainless-steel swivel with upset shackle.Matches the ball-bearing blocks Art-No 1193-...
High-quality horizontal single sheave ball-bearing blocks from the manufacturer HERM. SPRENGER.Intended for just about all uses on dinghies, sailing boats, and small yachts.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, a mainsheet in light winds).The ball bearings of the block is equipped with high-quality plastic bearings.Simple black housing made from high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
High-quality single sheave ball-bearing block with fixed bracket from the manufacturer HERM. SPRENGER.Intended for just about all uses on dinghies, sailing boats, and small yachts.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, a mainsheet in light winds).The ball bearings of the block is equipped with high-quality plastic bearings.Simple black housing made from high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
Swivel with shackle made of stainless steel, suitable for SPRENGER blocks with ball bearing or plain bearing.
High-quality Violin ball-bearing blocks from the manufacturer HERM. SPRENGER.Intended for just about all uses on dinghies, sailing boats, and small yachts.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, the mainsheet in light winds).Equipped with stainless steel ball bearings.Simple black housing made form high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The high quality of the blocks made by the manufacturer HERM. SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
High-quality triple sheave ball-bearing blocks from the manufacturer HERM. SPRENGER.Intended for just about all uses on dinghies, sailing boats, and small yachts.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, a mainsheet in light winds).The ball bearings of the blocks for 8 mm rope have high-quality plastic bearings, while the larger blocks are equipped with stainless steel ball bearings.Simple black housing made from high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The standard block eye can be used with very short joints.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
High-quality single sheave ball-bearing block with hollow axle from the manufacturer HERM. SPRENGER.Intended for just about all uses on dinghies, sailing boats, and small yachts.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, a mainsheet in light winds).The ball bearings of the block is equipped with high-quality plastic bearings.Simple black housing made from high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
High-quality single sheave "stand up" ball-bearing block from the manufacturer HERM. SPRENGER.Intended for dinghies, sailing boats, and small yachts.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, a mainsheet in light winds).The ball bearings of the block is equipped with high-quality plastic bearings.Simple black housing made from high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
High-quality double sheave violin ball-bearing blocks from the manufacturer SPRENGER with a stainless steel snap shackle as block eye.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, a mainsheet in light winds).The blocks are equipped with stainless steel ball bearings.Simple black housing made from high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The high quality of the blocks made by the manufacturer SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
The German marine equipment manufacturer HERM. SPRENGER (HS) has modernised and updated his program with the new S-Serie of blocks.The breaking load was continuously increased and modern needle bearing blocks developed, which combine the positive properties of ball bearing blocks as well as those of slide bearing blocks.Needle bearings ensure the least frictional resistance even at high loads and are thereby a very robust and multi-purpose alternative to ball bearing blocks.The swivel shackles of the swivel blocks can be locked into different positions with a screwdriver.
Modern, smooth rolling swivel blocks with clam cleat, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings.Rope sheave made from high strength ACETAL with riveted axle.Sliding bearing blocks, called PBB Plain Bearing Block with SELDEN, are especially suitable for high static loads, e.g. for halyards, sheet deflections and kicking straps.The swivel shackle can be arrested in two positions at the push of a button.The highest load possible is equal to 50% of the declared breaking load.
Modern, smooth rolling fiddle blocks with sliding bearings, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings.Rope sheave made from high strength ACETAL (D= 70mm and 80 mm with low friction TEFLON sliding bearing) with riveted axle.The highest load possible is equal to 50% of the declared breaking load. The fiddle blocks are especially suited in comination as main sheet tackle, kicking strap or luff tackle. The blocks are also available with a clam cleat.
Solid single sheave low-friction blocks intended for high loads and continuous stress (for example, halyard blocks).Simple black housing made from high-quality UV- and seawater-resistant plastic.All metal fittings and pins are made from stainless steel. For the blocks for 12 mm rope, the swivel can easily be replaced with a fixed shackle > item no. 1188-501 or a swivel shackle > item no. 1193-408.Available with or without bottom becket.
Modern, smooth rolling single sheave swivel blocks with sliding bearing, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings.Rope sheave made from high strength ACETAL (D=70 mm and 80 mm with low friction TEFLON sliding bearing) with riveted axle.Sliding bearing blocks, called PBB Plain Bearing Block with SELDEN, are especially suitable for high static loads, e.g. for halyards, sheet deflections and kicking straps.The highest load possible is equal to 50% of the declared breaking load.The swivel shackle can be arrested in two positions at the push of a button.The blocks are also available with a clam cleat.
These snap shackles can be mounted on the swivels of the SELDEN blocks instead of the standard harp shackles and are an ideal extension.The standard design is equipped with a narrow bracket to hook onto fittings and an extra model is equipped with a wide "low friction" bracket in order to hook into cordage.
Modern, smooth rolling swivel blocks with clam cleat, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings, rope sheave made from high strength ACETAL with riveted axle.Sliding bearing blocks, called PBB Plain Bearing Block with SELDEN, are especially suitable for high static loads, e.g. for halyards, sheet deflections and kicking straps.The swivel shackle can be arrested in two positions at the push of a button.The highest load possible is equal to 50% of the declared breaking load.
Modern, smooth rolling cheek blocks with sliding bearings, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings.Rope sheave made from high strength ACETAL (D 80 mm with low friction TEFLON sliding bearing) with riveted axle.The highest load possible is equal to 50% of the declared breaking load.For mounting the blocks on the mast without an additional base plate there is a model each with a hollow rounded support. The radius for which the block is optimally suited is specified.Mounting screws are not included in the shipment.
Modern, smooth rolling double sheave swivel blocks with sliding bearing, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings.Rope sheave made from high strength ACETAL with riveted axle.Sliding bearing blocks, called PBB Plain Bearing Block with SELDEN, are especially suitable for high static loads, e.g. for halyards, sheet deflections and kicking straps.The highest load possible is equal to 50% of the declared breaking load.
Modern, smooth rolling triple sheave swivel blocks with sliding bearing, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings.Rope sheave made from high strength ACETAL with riveted axle.Sliding bearing blocks, called PBB Plain Bearing Block with SELDEN, are especially suitable for high static loads, e.g. for halyards, sheet deflections and kicking straps.The highest load possible is equal to 50% of the declared breaking load.The swivel shackle can be locked in two positions at the push of a button.The blocks are also available with a clam cleat.
Modern, smooth rolling swivel blocks with clam cleat and becket, developed by the Swedish mast builder SELDEN.The casings are made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings. Rope sheave made from high strength ACETAL with riveted axle.Sliding bearing blocks, called PBB Plain Bearing Block with SELDEN, are especially suitable for high static loads, e. g. for halyards, sheet deflections and kicking straps.The swivel shackle can be arrested in two positions at the push of a button.The highest load possible is equal to 50% of the declared breaking load.
Solid single sheave low-friction blocks intended for high loads and continuous stress (for example, halyard blocks).Simple black housing made from high-quality UV- and seawater-resistant plastic.All metal fittings and pins are made from stainless steel. The swivel can easily be replaced with a fixed shackle > item no. 1188-501 or a swivel shackle > item no. 1193-408 (must be ordered separatly).Available with or without bottom becket.
Solid low-friction blocks with bushings, intended for high loads.Fiddle block with bottom becket and adjustable jam cleat. Simple black housing made from high-quality UV- and water-resistant HOSTAFORM C plastic.Versatile block - hung with a swivel shackle.The swivel is riveted to the block.Also available with swiveling snapshackle.
Horizontal block with two M6 attachment bolts.Solid friction bearing block with bushings for high loads and endurance.Simple black housing made from high-quality UV- and seawater resistant plastic.All fittings and bolts made of stainless steel.
Swivel with shackle made of stainless steel, suitable for SPRENGER blocks with ball bearing or plain bearing.
Solid single sheave low-friction block with bottom becket, intended for high loads and continuous stress (for example, halyard blocks).Simple black housing made from high-quality UV- and seawater-resistant plastic.All metal fittings and pins are made from stainless steel.
Single sheave high-strength yacht and working blocks for the most demanding uses. The white Polyacetal sheaves run smoothly over brass bearings. The black nylon housing is set on a solid stainless steel 3-in-1 suspension that includes a shackle, which allows the block to act as a swivel block or to be set to hang parallel or perpendicular using an Allen-head screw.The very high breaking loads have been tested by Germanisher Lloyd (GL). The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).
Single sheave high-strength yacht and working blocks for the most demanding uses.The white Polyacetal sheaves run smoothly over brass bearings. The black nylon housing is set on a solid stainless steel 3-in-1 suspension that includes a shackle, which allows the block to act as a swivel block or to be set to hang parallel or perpendicular using an Allen-head screw.The very high breaking loads have been tested by Germanisher LLoyd (GL). The Safe working load (SWL) is 50% of the given breaking load (BRL).
Compact high-strength snatch block.The forged patent clasp can be opened through pulling on the axis: A mechanism that is secure against accidental opening and can be used simply and conveniently.The fittings are made from high-strength stainless steel. The housing and sheave are gray or black plastic.The safe working load (SWL) is about 60% of the given breaking load (BRL).
Compact, ball-bearing high-strength snatch block with traditional side closure.Fittings of stainless steel and housing of black hard rubber.Safe working load (SWL) = 50% of the the breaking load (BRL).
Small snatch block in a classic shape. A robust design with simple opening/closing function.The swivel snap shackle is made of marine grade stainless steel to ensure a long service life.The housing is made of anthracite coloured nylon, the sheave of white acetal plastic with brass plain bearing bush.The maximum working load must never exceed 50% of the breaking load (BRL).When using a snatch block on the foot rail, a bungee line should be attached to the latch to prevent the block from "tipping over", hitting the deck and causing damage.
Open fairlead eye made from high tensile Duplex stainless steel and an endless DYNEEMA loop. This small and compact cast steel part can replace conventional snatch blocks and sheave pulleys with slow running lines and thereby displays enormously high breaking loads and much less weight. On one side the DYNEEMA loop is only slipped over, meaning the soft block is easily opened and closed. Typical applications: z. B. mast heel block, barber hauler, gennaker foot block.
Exceptionally light ball-bearing snatch block with a housing made from high-strength plastic, in which the entire housing side unfolds.Well suited as a block for "flying" lines, for example, trim lines and barber haulers, that are spliced into the block.1459-014 with locking mechanism.
Solid heavy snatch block with traditional side closure.Fittings of stainless steel. Block housing made from form-stable rubber, which cushions against banging and thus protects the deck finish.The snap shackle for hanging the block cannot jam because it can tilt and turn on the locking pin (Trunnion Principle).Safe working load (SWL) = 50% of the the breaking load (BRL).
Light, high tensile snatch block with a DYNEEMA soft shackle which runs through the hollow axle of the sheave.These blocks reach with very high safe working loads (SWL) using this technique.The sheave runs on a composite fibre bush bearing and is lead sideways through a ball bearing.In order to open these blocks the plastic cheeks on the side can be twisted around the hollow axle. A design, which ensures a very simple and quick handling of the block.
Small snatch block in a classic shape - from the traditional British company DAVEY London.A robust construction with a simple opening/closing function.The block consists of a rotating snap shackle made of stainless steel, polished stainless steel joints and cheeks made of bronze.The practical yet traditional looking snatch block has a sheave made of white Ertalyte PET-P.The safe working load (SWL) must never exceed 50% of the breaking load (BRL).When using a snatch block on the foot rail, a bungee line should be attached to the latch to prevent the block from "tipping over", hitting the deck and causing damage.
Ratchet block with ball-bearings and an aluminium sheave.Lockable swivel shackle.Plastic (HOSTAFORM C) housing with stainless steel fittings.Ratchet blocks can significantly reduce the load on the hauling part of the sheet, because the ratchet roller can be blocked during slacking.In light wind the ratchet can be switched off to allow the block to turn both ways.With the ratchet on, the sheet purchase has 8 times as much power as when running free.
Ratchet block with clam cleat, ball-bearings and an aluminium sheave made by SPRENGER.Lockable swivel shackle.Plastic (HOSTAFORM C) housing with stainless steel fittings.The angle of the cleat is adjustable.Ratchet blocks can significantly reduce the load on the hauling part of the sheet, because the ratchet roller (in a 3-sheve block the middle roller) can be blocked during slacking.In light wind the ratchet can be switched off to allow the block to turn both ways.With the ratchet on, the sheet purchase has 8 times as much power as when running free.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
The BARTON Ratchet Block is designed to be used on mainsheet systems and spinnaker sheets on dinghies and keelboats, and for small yachts up to 30 feet.The new Ratchet Block allows sailors to easily hand hold loaded lines and offer balance between holding power and controlled easing.Designed for low friction and longevity in harsh marine environments, the Ratchet Block body is manufactured from a composite of high density nylon and glass fiber reinforced polymer with a high level of UV protection. Internal components are of marine grade 316 stainless steel and the 12 faced aluminium sheave is anodised in gunmetal silver. Maximum line diameter: 10mm
Modern, smooth rolling swivel blocks with clam cleat, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings.Rope sheave made from high strength ACETAL with riveted axle.Sliding bearing blocks, called PBB Plain Bearing Block with SELDEN, are especially suitable for high static loads, e.g. for halyards, sheet deflections and kicking straps.The swivel shackle can be arrested in two positions at the push of a button.The highest load possible is equal to 50% of the declared breaking load.
Large sheet block with cam cleat. From the MICRO-XS series by HS.Extremely small, compact, and light ball-bearing block.Well suited for recreational sailors and various industrial applications. The housing of this newest innovation from the yacht fittings source Herm. Sprenger (HS) is made entirely of stainless steel. The black plastic sheave runs on stainless steel ball bearings, which ensures excellent smooth-running characteristics.
Mainsheet block base with stand-up spring and adaptor for a variety of blocks.The DELRIN ball bearings ensure good turning, even under load.Using the adjustor screw, the foot can be braked or locked.The black aluminium extension arm is available in two lengths. The mounted cleat is suitable for ropes with a diameter of 8-13 mm and can be mounted on or under the extension arm.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
Modern, smooth rolling swivel blocks with clam cleat, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings, rope sheave made from high strength ACETAL with riveted axle.Sliding bearing blocks, called PBB Plain Bearing Block with SELDEN, are especially suitable for high static loads, e.g. for halyards, sheet deflections and kicking straps.The swivel shackle can be arrested in two positions at the push of a button.The highest load possible is equal to 50% of the declared breaking load.
Modern, smooth rolling swivel blocks with clam cleat and becket, developed by the Swedish mast builder SELDEN.The casings are made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings. Rope sheave made from high strength ACETAL with riveted axle.Sliding bearing blocks, called PBB Plain Bearing Block with SELDEN, are especially suitable for high static loads, e. g. for halyards, sheet deflections and kicking straps.The swivel shackle can be arrested in two positions at the push of a button.The highest load possible is equal to 50% of the declared breaking load.
Solid low-friction blocks with bushings, intended for high loads.Fiddle block with bottom becket and adjustable jam cleat. Simple black housing made from high-quality UV- and water-resistant HOSTAFORM C plastic.Versatile block - hung with a swivel shackle.The swivel is riveted to the block.Also available with swiveling snapshackle.
Ball-bearing mainsheet block from the manufacturer HERM. SPRENGER. With riveted swivel fitting and becket. The cleat angle is adjustable.Black plastic housing made from UV- and saltwater-proof HOSTAFORM C. Ball-bearing sheaves.
Ball-bearing violin blocks with very smooth running qualities.Functional sheet block.With bracket and riveted swivel fitting. The sheet cleat angle can be adjusted.Simple black housing made form high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
Ratchet block with clam cleat, ball-bearings and an aluminium sheave made by SPRENGER.Lockable swivel shackle.Plastic (HOSTAFORM C) housing with stainless steel fittings.The angle of the cleat is adjustable.Ratchet blocks can significantly reduce the load on the hauling part of the sheet, because the ratchet roller (in a 3-sheve block the middle roller) can be blocked during slacking.In light wind the ratchet can be switched off to allow the block to turn both ways.With the ratchet on, the sheet purchase has 8 times as much power as when running free.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
Screw-on block/side pulley. From the MICRO-XS series by HS.Extremely small, compact, and light ball-bearing block for recreational sailors and various industrial applications. The housing of this newest innovation from the yacht fittings source Herm. Sprenger (HS) is made of stainless steel. The black plastic sheave runs on stainless steel ball bearings, which ensures excellent smooth-running characteristics.
Deflection pulley. From the MICRO XS series by HS.Extremely small, compact, and light ball-bearing block.Well suited for recreational sailors and various industrial applications. The housing of this newest innovation from the yacht fittings source Herm. Sprenger (HS) is made entirely of stainless steel. The black plastic sheave runs on stainless steel ball bearings, which ensures excellent smooth-running characteristics.
High-quality horizontal single sheave ball-bearing blocks from the manufacturer HERM. SPRENGER.Intended for just about all uses on dinghies, sailing boats, and small yachts.Ball-bearing performance (recognizable by the small red dot on the side) for all fast-running lines and for uses in which exceptionally smooth running is required (for example, a mainsheet in light winds).The ball bearings of the block is equipped with high-quality plastic bearings.Simple black housing made from high-quality UV- and saltwater-resistant HOSTAFORM C plastic.All fittings and bolts are of stainless steel.The high quality of the blocks made by the manufacturer HERM.SPRENGER (HS) and the good price to performance ratio have been emphasized in a number of professional journals.
Heavy duty stand up pulley for wire rope.Anodized solid aluminium sheave with nylon sleeves.Side plates (1.5 mm) are made of stainless steel.The manufacturer does not provide information about breaking load.
Screw-on block with hinge/deflection pulley. From the MICRO-XS series by HS.Extremely small, compact, and light ball-bearing block.Well suited for recreational sailors and various industrial applications. The housing of this newest innovation from the yacht fittings source Herm. Sprenger (HS) is made entirely of stainless steel. The black plastic sheave runs on stainless steel ball bearings, which ensures excellent smooth-running characteristics.
Stainless-steel horizontal screw-on block, with hollow axle. Made by the manufacturer SPRENGER.
Modern, smooth rolling cheek blocks with sliding bearings, developed by the Swedish mast builder SELDEN.Casings made from high tensile, glass fibre reinforced plastic with internal stainless steel fittings.Rope sheave made from high strength ACETAL (D 80 mm with low friction TEFLON sliding bearing) with riveted axle.The highest load possible is equal to 50% of the declared breaking load.For mounting the blocks on the mast without an additional base plate there is a model each with a hollow rounded support. The radius for which the block is optimally suited is specified.Mounting screws are not included in the shipment.
Horizontal block with two M6 attachment bolts.Solid friction bearing block with bushings for high loads and endurance.Simple black housing made from high-quality UV- and seawater resistant plastic.All fittings and bolts made of stainless steel.
