- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Filter products now
from
69 €
to
315 €
from
42 mm
to
42 mm
from
62 mm
to
62 mm
from
250 g
to
250 g
from
0.5 kg
to
4 kg
Filter products now
from
69 €
to
315 €
from
42 mm
to
42 mm
from
62 mm
to
62 mm
from
250 g
to
250 g
from
0.5 kg
to
4 kg
Boom crutches
4 products
Boom crutch ash wood
€129.00 *
Traditional boom scissors made from ash wood.The crutch fits for dinghies and small cruisers.The resting boom height is around 80 cm, for boom diameter max. 90 mm.Made from ash battens 20 x 52 mm, sanded and oiled.Combines well with the bronze boom crutch sockets from DAVEY (please check "Suitable items").
Gallow frame fitting large
From
€95.00 *
Heavy fitting made from polished cast bronze that allows the construction of a boom crutch or a gallows frame.Large design, for inner pipe diameter of 39 mm and outer pipe diamter of 48 mm. Pipes are not available.The corner fitting must be incorporated in a self-made wooden cross beam. The deck fitting anchors the supports on deck and holds them up.The complete gallows frame may be set up of follwing parts:2 x corner fittings;2 x 5° deck fittings;2 x 45° deck fittings for the diagonal supports;2 hinges;2 pieces brass tube of the desired length for the vertical supports (not available);2 pieces of brass tube for the diagonal supports (not available).For technical reasons you can only enter length specifications for the tubes in whole meters here; please provide the exact lengths of each pipe you need in the "Comments" section of the order form, then we can prepare (and charge) them to the centimeter.




Boom Crutch Socket bronze DAVEY 9591
€139.00 *
Solid cast fitting for traditional gallows frames; fits square wooden boom crutches.Angled approximately 30°. Sand cast from seawater-resistant bronze, hand polished. Weight: approx. 900g.A complete gallows frame requires a pair (2 pieces).



Boom crutch socket from bronze DAVEY 9595
From
€69.00 *
Robust boom crutch socket, made from cast bronze by DAVEY. Surface hand polished or chrome plated. Straight design, open on one side. Fits well as base fitting for our boom scissors. (2 socket pieces are needed for one boom crutch). Measurements L x B x H: 62 x 33 x 42 mm, inside: 60 x 24 mm.


