Anchor winches

Beautiful compact two-gear hand-cranked bronze windlass.Axles, pawls and screws made from stainless steel.The heavy, traditional hand wheel (diameter 300 mm) with swing spokes and large foldable handle makes retrieval easy.Gear changes and uncoupling through shifting the drive axle.Control of the chain while easing comes through use of the foot brake.Pulling force:1st gear: 450 daN2nd gear: 600 daN.Hoisting speed:1st gear: 6 cm / revolution2nd gear: 10 cm / revolution.

Bronze anchor windlass. Solid design for boats up to 15 m.Two-speed bronze hand-operated windlass.Axles, pawls and springs made of stainless steel.The heavy, traditional wheel (d = 300 mm) with swung spokes and large folding turning handle allow easy retrieval.Gear changes and uncoupling through shifting the drive shaft.Band brake with spindle.Pulling force: 1st gear: 450 daN 2nd gear: 600 daN.Hoisting speed:1st gear: 6 cm / revolution2nd gear: 10 cm / revolution.Also available with additional rope / wire drum, which allows it, for example, to be used as a mast-hoisting winch.

Heavy and robust two gear anchor winch made from high-strength seawater resistant cast brass for yachts and ships of up to a length of 20 m.The driving mechanism is operated by a strong handle via a mechanical transmission system. This gear drive and all axles are made from stainless steel. In speed gear the hoisting speed is 9 m/min (6,5 double travel per metre).In power gear, the pulling force is doubled, the hoisting speed is reduced to 2,5 m/min (this amounts to 14 double travel per metre).This is achieved by switching one bolt to change the handle unit between speed gear and power gear. A traction force of 500 kg is possible.The solid telescopic handle, made from bronze tubing (diameter 40 mm, total length 0,80 m) also activates the brake nut.On the port side of the winch a strong capstan head (diameter 115 mm) is fitted, which can be used for all kinds of traction work.The powerful body is open on the aft end for maintenance and lubrication.Strong cleat on top of the housing.Weight with handle: 42 kg. Dimensions: base: 307 x 180 mm, overall width: 350 mm, height (with cleat) 265 mm.Available with a chainwheel for DIN 766A chain 10 mm or 13 mm.

Very compact anchor winch made of polished bronze from the Australian manufacturer MUIR, with vertical chain sprocket.The winch is precisely manufactured. The low profile design makes the windlass very light and versatile.Features:Combination chain wheel to retrieve chain (DIN 766A) and rope (8 mm chain/14 mm rope or 10 mm chain/16 mm rope).Chain and cable can be spliced together and retrieved as a single rode.The winches can be used with any standard winch handle (a simple MUIR 8-inch plastic handle comes with the windlass).The chain runs over a conical brake. The chain ejector hinders overrides of chain and rope. Gear ratio 5.5:1.Max. pull 230 kg.Speed 0.36 m/revolution.3-year manufacturer's guarantee.

Very compact anchor winch made of polished bronze from the Australian manufacturer MUIR, with vertical chain sprocket and additional mooring capstan. The capstan can be operated independently of the chain sprocket. The winch is precisely manufactured. The low profile design makes the windlass very light and versatile.Features:Combination chain wheel to retrieve chain (DIN 766A) and rope (8 mm chain/14 mm rope or 10 mm chain/16 mm rope).Chain and cable can be spliced together and retrieved as a single rode.The winches can be used with any standard winch handle (a simple MUIR 8-inch plastic handle comes with the windlass).The chain runs over a conical brake. The chain ejector hinders overrides of chain and rope. Gear ratio 5.5:1.Max. pull 230 kg.Speed 0.36 m/revolution.3-year manufacturer's guarantee.

Traditional, compact and heavy-duty hand anchor windlass.Robust, open steel construction with heavily dimensioned steel axles in industrial roller bearings, large handwheel with curved spokes, forged capstan head and foot brake with powerful brake band.The main axle of the winch can be disengaged so that the anchor can be lowered quickly and easily.The cast steel chain wheel is suitable for a DIN 766 chain.All parts are primed twice with rust protection and painted black with industrial paint.For an extra charge, the winch can also be spray-galvanized for corrosion protection before painting. Liquid zinc is applied to the sandblasted steel using a spray gun. This thermal process coats the steel with a particularly durable zinc layer and ensures a smooth surface. Please ask us about it.An aluminum ball-bearing rotary handle is available as an accessory, as is the crank wheel.

Traditional, compact and heavy-duty two-speed manual anchor windlass.Robust, open steel construction with heavily dimensioned steel axles in industrial roller bearings, large handwheel with curved spokes, forged capstan head and foot brake with powerful brake band.The main axle of the winch can be disengaged so that the anchor can be lowered quickly and easily.The cast steel chain wheel is suitable for a DIN 766 chain.All parts are primed twice with rust protection and painted black with industrial paint.For an the winch can also be spray-galvanized before painting as corrosion protection. corrosion protection. Liquid zinc is sprayed onto the sand-covered applied to the sandblasted steel using a spray gun. This thermal process coats the steel with a particularly good particularly durable zinc coating and ensures a smooth surface. Please us about it.A ball-bearing mounted aluminum twist grip is available as an accessory, as is the crank wheel.

The compact, robust LOFRANS ROYAL manual anchor winch has a sprocket for DIN 766 chain and an additional lateral warping capstan.The chain wheel and capstan can each be operated separately, which is very effective thanks to the double-acting drive with the manual capstan.Silver-coloured anodised, seawater-resistant aluminium housing with manual chain brake.Maintenance-free thanks to lifetime lubrication.Technical dataWorking load: 50 kgBreakaway force: 200 kgMaximum pulling force: 400 kgWeight: 9 kgScope of deliveryAnchor windlass Lofrans RoyalHandspakeFastening material

The LOFRANS foot switches are ideal for mounting on deck. A stainless steel protective cap prevents accidental operation. The foot switches are available in an up (red) or down (black) version.Technical dataMaterial: Stainless steelDimensions: 80 x 95 x 20 mmOperating voltage: 12 / 24V DCMax. Current: 5 ampsWaterproof in accordance with IP67Operating temperature: -10 to +60 °CWeight: 250 g

The thermal circuit breaker protects the electric motor of the Lofrans windlass from overloads.For the LOFRANS TIGRES windlass, the 100A circuit breaker is recommended for the 12 volt version and the 70A circuit breaker for the 24 volt version.For other Lofrans windlasses you can look up the necessary circuit breaker in the manual (under ´Downloads´).

Robust, vertical, electric windlass with powerful watertight motor (protection class IP67).Base, chain cover and, if necessary, mooring cap in stainless steel AISI316. Combination chain sprocket made of chrome-plated bronze, for hoisting chain DIN 766 and beaten anchor line (12-14 mm). Suitable for boats from eight to ten metres in length.Manual free fall. Low-wear operation, simple installation and long service life thanks to vertical motor without angular gear: the patented, highly effective planetary gear enables powerful work with low power consumption, low weight and high efficiency. Flat design. Suitable for deck thickness 20-40 mm.Powerful motor 12 V / 800 W, current consumption 84 A.Working load in operation 95 kg, maximum 290 kg. Maximum pulling force 820 kg.Maximum hauling speed with 8 mm chain 22.5 m/min, under load 15.2 m/min.Available with and without hauling capstan.Scope of delivery: winch, relay box, built-in sensor for chain counter, plastic crank, base seal, drilling template.Switches and other accessories can be found under "Accessories" (see below).Other sizes and other QUICK windlass models are also available on request.

Robust electric windlass with powerful watertight motor (protection class IP67).Base, chain cover and, if necessary, mooring capstan made of stainless steel AISI316. Combination chain sprocket made of chromed bronze, for hoisting chain DIN 766 and beaten anchor line (12-14 mm). Suitable for boats from seven to twelve metres in length.Manual free fall. Low-wear operation, easy installation and long service life. Flat design. Suitable for deck thickness 25-50 mm.Powerful motor 12 V / 700 W, current consumption 95 A. Working load in operation 100 kg, maximum 300 kg. Maximum pulling force 680 kg. Maximum hauling speed with 8 mm chain 22.6 m/min, under load 11.6 m/min. Available with and without hauling capstan.Scope of delivery: winch, relay box, built-in sensor for chain counter, plastic crank, base seal, drilling template.Switches and other accessories can be found under "Accessories & Spare Parts" (see below).Other sizes and other QUICK windlass models are also available on request.

Beautiful, compact foreship windlass, made entirely of bronze and stainless steel. The windlass combines a robust warping capstan with a horizontal chain sprocket. Sprocket for DIN 766 chain in 10 mm or 13 mm. The chain wheel can be braked and disengaged using a standard winch handle (not included).The chain inlet is integrated into the base plate of the windlass. If the chain is fixed with a separate chain stopper, the capstan head can be used to retrieve a hawser.Dimensions:Type 500: (L x W x H) 360 x 200 x 220 mmType 700: (L x W x H) 380 x 200 x 220 mmMotor/gearbox dimensions below deck, each (L x W x H) 380 x 230 x 190 mm.Maximum deck thickness: 150 mm. Motor power:With the 10 mm winch, the powerful motor output of 1.5 kW generates a pulling force of 500 daN at a hauling speed of 12 m per minute.The 13 mm winch operates with a motor output of 2.3 kW (700 daN).Motorised operation for hoisting only! The anchor must drop freely for hoisting.The windlass is also available for 380V on request.Supplied complete with:Stainless steel hand spakeElectrical accessories: relay box and foot switch (button) in bronze installation box with cover and cable.Delivery time approx. 2 months. Optional accessories: Standard winch handleHand-held remote controlA data sheet is available under "Downloads & Information".

Electric windlass model TIGRES for boats up to 15 m in length from the renowned manufacturer LOFRANS. The housing is made of seawater resistant aluminum alloy and anodized silver.  The reversible electric motor for retrieving and freeing the chain has a powerful output of 1500 watts. The motor (IP66) is integrated in the windlass, so no motor installation below deck is necessary. The capstan head can be operated separately. Emergency operation is possible with a handle.Features:working load 190 kg,transaction max. 1390 kg,max. catch-up speed 33 m/min, under working load 14-16 m/min,power 1500 watts,for boat lengths from 12 to 15 m,for chain diameter 8 mm or 10 mm acc. to DIN 766,indepent gipsy and drum operation,manual chain release,manual override,with capstan drum,weight 28 kg.Available for anchor chains of 8 mm or 10 mm diameter, according to DIN766. Also available for ISO chains on request.Supplied with hand lever and relay box, control switches must be ordered separately.Designing and making windlasses for more than 40 years leads LOFRANS to experience a lot about their products which have been going through a constant evolution year by year.

The LOFRANS control panel type L is suitable for console installation. The buttons for raising and lowering can be used to operate a LOFRANS electric windlass.Installation depth: at least 28 mm

THETIS 1002 hand-held cable remote control for the LOFRANS TIGRES anchor winch.The housing is non-slip, allowing the winch to be operated safely even when wet. The plug and socket are waterproof to IP66. The flexible cable can be pulled up to a length of four metres. Technical dataPower supply: 10 - 30 V DCCurrent consumption during operation: 15 mA (12 V)Operating temperature: -10 to 60 °CProtection class: IP66Dimensions: 154 x 59 x 38 mmWeight: 120 g

LOFRANS THETIS 7003 radio remote control / chain counter for the LOFRANS TIGRES anchor winch.The housing is non-slip and allows the winch to be operated safely even when wet. The remote control is waterproof to IP67. See table below for dimensions.There are two switches for up and down. The application speed, the applied chain length and the tension are shown on the LED display. The menu languages available are German, English, Italian, French and Spanish.Technical dataVoltage: 12 - 24 V DCMax. Switching current at the output of the receiver: 2AOperating temperature: -10 - 60 °CProtection class: IP67Scope of deliveryRadio remote controlWall bracketReceiver boxUSB charging cable (without plug for 230 V)Magnetic sensor and bracketMagnet for chain nut

The LOFRANS foot switches are ideal for mounting on deck. A stainless steel protective cap prevents accidental operation. The foot switches are available in an up (red) or down (black) version.Technical dataMaterial: Stainless steelDimensions: 80 x 95 x 20 mmOperating voltage: 12 / 24V DCMax. Current: 5 ampsWaterproof in accordance with IP67Operating temperature: -10 to +60 °CWeight: 250 g

The thermal circuit breaker protects the electric motor of the Lofrans windlass from overloads.For the LOFRANS TIGRES windlass, the 100A circuit breaker is recommended for the 12 volt version and the 70A circuit breaker for the 24 volt version.For other Lofrans windlasses you can look up the necessary circuit breaker in the manual (under ´Downloads´).

Accessories for the QUICK PRINCE windlasses.Foot switch for lowering and retrieving the anchor.Wired remote control with non-slip housing. The flexible cable has a length of up to 4 meters. The plug and socket are waterproof to IP67.Power supply: 10 - 30 V DCCurrent consumption in operation: 15 mA (12 V)Operating temperature: -10 - 60 °CProtection class: IP67Dimensions: 154 x 59 x 38 mmWeight: 120 g

Heavy crank wheel with curved spokes, as found on the windlasses of many flat-bottomed ships.The crank wheel is made of untreated cast iron, undrilled and cast-grey. It must therefore be reworked according to your own requirements.We can also supply the crank wheel with a larger diameter (45 cm / 60 cm). Please ask us about this.

Ball bearing handle for windlass hand wheels or cranks. The handle is made of polished aluminum, the axle is made of galvanized steel. The M12 thread is 20 mm long.

The LOFRANS control panel type L is suitable for console installation. The buttons for raising and lowering can be used to operate a LOFRANS electric windlass.Installation depth: at least 28 mm

THETIS 1002 hand-held cable remote control for the LOFRANS TIGRES anchor winch.The housing is non-slip, allowing the winch to be operated safely even when wet. The plug and socket are waterproof to IP66. The flexible cable can be pulled up to a length of four metres. Technical dataPower supply: 10 - 30 V DCCurrent consumption during operation: 15 mA (12 V)Operating temperature: -10 to 60 °CProtection class: IP66Dimensions: 154 x 59 x 38 mmWeight: 120 g

Gypsy for LOFRANS windlasses.The chain sprocket fits the horizontal LOFRANS anchor winch models:RoyalTigresCaymanKobraFor chains according to DIN 766 or ISO4565 dimensions (see table).

LOFRANS THETIS 7003 radio remote control / chain counter for the LOFRANS TIGRES anchor winch.The housing is non-slip and allows the winch to be operated safely even when wet. The remote control is waterproof to IP67. See table below for dimensions.There are two switches for up and down. The application speed, the applied chain length and the tension are shown on the LED display. The menu languages available are German, English, Italian, French and Spanish.Technical dataVoltage: 12 - 24 V DCMax. Switching current at the output of the receiver: 2AOperating temperature: -10 - 60 °CProtection class: IP67Scope of deliveryRadio remote controlWall bracketReceiver boxUSB charging cable (without plug for 230 V)Magnetic sensor and bracketMagnet for chain nut

Toothed chain wheel, made from solid gray cast iron.Undrilled design for short-link DIN 766 chain.Raw iron construction.The stated measures can differ