Cam cleats
The classic! The best known and widest used building technique for cam cleats. Simply built. Riveted design. Made entirely from seawater-resistant composite materials and stainless steel.The cleat jaws have very strong dentition and stainless steel springs.With stainless steel fairlead.
Classic cam cleat made of tufnol. Highly resistant against abrasion and UV-radiation. Rivets and springs made of stainless steel. Good clamping force due to the shape of the clamp jaws. Colour: reddish brown.
SERVO CLEAT with patented jaws that guarantee an effortless yet secure hold on any line.The design of the jaws enables the easy insertion without having to readjust the clamped sheet. Through the specially V shaped design of the jaws the pressure from the sheet is converted into the pivoting for the opening or closing of the curry cleat: the sheet is effortlessly clamped; hence the name: SERVO-CLEAT.Base and springs made from stainless steel; jaws made from black Delrin; teeth strengthened with stainless steel insets.Comes complete with 2 stainless steel screws. A distinctive feature of type 11: comes with stainless fairlead as lower bracket; type 44: low design with base plate made from stainless steel.Optional accessories include:becket fairleads, top fairleads, roller fairleads and parallel or angled (15°) pedestals.
These accessories for SERVO-CLEAT sheet clamps, fit exactly to the respective clamp type. Available are fairleads and bases, as well as a bottom deck holder, which makes it possible to guide the sheet below deck without having to mount the clamp overhead.
Solid bronze cam cleats with robust "toothed" jawsBronze construction; finish: polished bronze or chromed. Type 1 with oval mounting plate and stainless steel springs. Fastened with countersunk screws.
Heavy cam cleat with strong jaws.Small bronze cleat, with stainless steel fairlead.Polished or chromed finish.Type 2 with mounting bolts that go all the way though the cleat and nuts or screw into tapped holes.Also available separately:Stainless steel adaptor plate with countersunk tapped holes. The plate can be installed on deck to allow the cleat to be mounted securely.
Cam cleat fully made from bronze.With bronze sliding bearing and stainless steel springs. Surface: tumbled with matt finish.Also available with permanently mounted leading bracket made from bronze.
BARTON TuPhblox cam cleat made of the well-proven reddish-brown Tufnol laminate. The cleat provides reliable load holding due to its high profile and robust, wear-resistant mechanism with stainless steel springs. Holding power is 230–260 kg depending on size.Mounting is via countersunk through sleeves integrated into the jaws, designed for M5 screws. Fastening is carried out from above.Available in two sizes for different rope diameters, each version with or without an integrated stainless steel fairlead.Tufnol is a multilayer, fabric-reinforced, resin-bonded laminate pressed under heat and pressure. The material is relatively light, offers high mechanical strength as well as high wear and corrosion resistance, and is seawater resistant.
HARKEN Offshore Cam-Matic cleat made of high-wear-resistant, precision-cast stainless steel with a high-gloss polished surface. Heavy-duty, seawater-resistant sheet cleat designed as a working cleat for high, dynamic sheet loads in offshore use. Suitable for cruising and racing yachts. Maximum working load 227 kg, for rope diameters from 6 to 16 mm. Top-mounted using 6 mm bolts through bushings in the cam jaws (bolts not included).Technical featuresAll-stainless-steel construction for maximum mechanical strengthHigh holding power with clean engagement and releaseLow wear under frequent useResistant to saltwater and harsh environmental conditionsFor sheets and trimming lines with high continuous loadsOffshore use on cruising and racing yachtsDeck areas subject to high loads or impactApplications where reliability is more critical than weight saving
