This electronic level switch does not require any mechanics or moving parts. Two field sensors ensure functional switching on and off of the connected pump. The switch turns on at 51 mm water level and turns off at 13 mm water level. The automatic sensor type BE9006 switches with an automatic 30 seconds switch-off delay. This delay allows water to be pumped out even below the switching level of 13 mm. The test function can be used to check the function of the pump after installation.Voltage: 12 V / 24 V.Max. switch current: 20 A.Residual current: 0,008 A.
Robust bilge switch with high switching capacity for powerful pumps. Very reliable switching due to a spring-loaded microswitch. Suitable for 12 volts and 24 volts. The switching capacity is maximum 168 VA (14A at 12V, 7A at 24V).The switch turns the pump on at a water level of 51mm and off at a water level of 19mm.
RULE Model No. 35A: This proven and robust floating switch has a high switching power (240 VA) and works for pumps with high initial current. The plastic housing is sonic welded and thus the switch offers a high working security. For 12 - 32 V. Switching capacity: 168 VA.
RULE Model No. 37A: This proven and robust floating switch has a high switching power (240 VA) and works for pumps with high initial current. The plastic housing is ultrasonic welded and thus the switch offers a high working security. For 12 - 32 V. Switching capacity: 240 VA.
Switch panel for automatic bilge pump. With sound and light alarm when pump is running automtically.With toggle switch, positions: "automatic/off/manual". With control lights and fuse 16 A/12 V. For 12 volt systems.
Bilge pump control panel for optional switching of the bilge pump via a float switch or by manual switching. The rocker switch offers three switching options "automatic / off / manual".With two LED indicators for operation control and alarm. Protection is provided by an integrated thermal circuit breaker. Two versions are available: BPA202: For on-board voltage 12 and 24 volts. Without acoustic alarm.BPA203: For on-board voltage 12 or 24 volts. With acoustic alarm buzzer that can be quit via a pushbutton.
The floating switch RULE-A-MATIC PLUS 40 allows the automatic switching of a bilgepump.The switch is encapsulated securely in a plastic housing and protected against damage and dirt.Housing L x W x H: 120 x 65 x 70 mm.For 12 - 32 V.Switching capacity: 240 VA max. 20 amps with 12 V.Also available with acoustic alert (please check "Suitable items" below).
The floating switch RULE-A-MATIC-PLUS allows the automatic switching of a bilgepump and the release of the optical/auditory (85 dbA) signal. The switch is encapsulated securely in a plastic housing and protected against damage and dirt. The floating axis is lead out of the housing and allows the simple functioning of the switch. Housing: L x W x H: 120 x 65 x 70 mm. Signal 47 mm.Switching capacity: 240 VA (max. 20 amps with 12 V).
Pump switch without moving parts or delicate sensors.Switching power 240 VA.Switch function is triggered by air pressure.No electric installation underwater. Includes:Plastic measuring bell, 3 m air hose (diameter = 8 mm),Switch unit of plastic.Switch range 55 mm - 25 mm of water depht.Switch unit dimensions: 153 x 75 x 45 mm.Working voltage: 12 or 24 V.
Compact automatic switch for many installation possibilities, even on sloping surfaces with an angle of up to 24°. The switch works reliably and switches on as soon as the water in the bilge reaches a height of about 5 cm. The cover provides extra protection for the float switch, for example against dirt and coarse parts.Housing L x W x H: 133 x 98 x 73 mm. For: 12 - 24 V. Switching capacity: 120 VA max. 12 amps with 12 V.
Switch panel, made of black plastic, for automatic bilge pump. With switch, positions: "auto / off / manual". With control lights and fuse 16A/12V or 8A/24V.For onboard systems of 12 or 24 volts.
For electric impeller pumps.Protects the pump against damage by dry run.The switch is installed on the sucction side of the pump. Cuts the power supply when the pressure drops, caused by a lack of water.Connected to the sucction tube by 1/4" BSP.
Brand name three-way switch for bilge pumps with high switching capacity but without a fuse holder. Black coloured stainless steel panel.For on-board voltage of 12 Volt and 24 Volt. For manual pumping the switch has to be pressed from the OFF position to the right (push-button function).
The MARCO PCS control panel allows the electronic pump to be switched on and off and monitored.Functions:On / Off,monitoring whether the pump is runningReset (if the pump has failed e.g. due totoo little liquid or overload),monitoring whether there is still enough liquid to pump.The control panel can be built in (a circular hole with a diameter of 70 mm is required), or screwed on with the housing.The control panel is connected to the pump by RJ11/6 telephone cable.Suitable for 12 and 24 volts. IP protection class 65. Dimensions L x W x H: 80 x 80 x 46 mm.