Extremely robust hand pump for pumping almost all liquids, even hot ones. The pump is well suited as an oil change and diesel pump. The pumps are not self-priming!The housing is completely made of cast iron and then varnished. The wings and valves are made of brass. The handle of the pump is made of wood (in the case of article 4626-010 the handle is made of varnished cast iron).On both sides there is an inch BSP female thread.Available with pump body made entirely of bronze on request.
Portable transfer pump set type MARCO CK for mobile use.Complete with metal carrying case with plastic handle.Integrated "on-off" switch, cables with fuse and battery clamps.Self-priming electric pump type MARCO UP3, with bronze gears for transfer of various liquids.Main applications: transfer of diesel fuel (day tank), water, antifreeze and oils of low viscosity.Ports with brass connection for 3/8" inner tubing, with hose connectors for 14mm hose. Self priming 1,5 m.Comes with transparent plastic filter.
Electric fuel pump that can be used to bring fuel to a stove if the primary tank is below the level of the fuel regulator and the installation of a day tank is not possible.This membrane pressure pump with electrically regulated electromagnetic works is maintenance-free and nearly wear-free.Data:- Dimensions: 73 x 128 mm,- Output: 120 l/h,- Pressure lift: 0.25 bar (max. 2,5 m),- Suction lift: -0.10 bar (max. 1,0 m),- Attachement fittings for hose 8 mm on both sides.
A patented intake valve eases the filling of various liquids, for example water, diesel, or gas.The liquid must only be higher than the container being filled, no more sucking with the mouth necessary.Comes with a 2m hose.
The all-purpose manual pump RHP500UV serves for emptying or filling-up with fluids, which do not affect aluminium or brass. Features: universally deployable, casing made of aluminium, smooth-running due to a special slip ring, displaced volume 555 ml, weight 576 g. A nozzle tube with lenght 200 mm and an inside diameter of 10 mm is part of the shipment.
Oil-change kit OCK1 for mobile use made by renowned pump manufacturer MARCO:Self-priming gear pump UP3/OIL for pumping oil and other liquids.Brass pump body with bronze gears.Comes with 2 hose nozzles (12mm), hose clamps, suction tubes, and an adaptor for the tube.Dimensions L x W x H: 138mm x 108mm x 89mmCapacity (suction pipe/hose diameter 6/8/13mm): 0.3/1/5.5 l/min.With the included suction tubing set, old oil can be removed comfortably through the dipstick hole in the engine block.Ready for attachment with cable and battery clamps, two tubes (6mm und 8mm) with fittings and matching hose nozzles.The pump kit is also available as model OCK1-R with an integrated switch. This reversible UP3/OIL-R pump may be used for filling and draining.Dimensions L x W x H: 180mm x 108mm x 89mm
Self-priming small feed pump with bronze gears, particularly suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Nickel-plated brass pump housing, stainless steel shaft. Suction height 1.5 m. Self-priming (not dry self-priming).Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3-S with integrated on/off switch or as transportable feed pump set MARCO UP3-CK. See under suitable articles.
Made entirely of brass.Comes with 2 mounting clamps and intake manifold (diameter = 6 mm, lenght = 370 mm).Inlet 4" inner threads and 2" outer threads.Dimensions: diameter = 29 mm, lenght = 200 mm.Output: 0.05 l/pump.Avaialble in brass (Ms) or chromed (Cr) designs.
Self-priming gear pump for pumping oil and other liquids.Pump body of brass with bronze gears.Comes with 2 hose clamps (14 mm) and an adapter for 8 mm plastic pipe.Self priming max. 1m.Dimensions: D = 65mm, L = 140 mm, weight 1.4 kg.The pump is also available as model UP3-R with an integrated switch, which enables the switching between filling and draining.With the optional set of suction pipes (see below) the motor oil can be easily drained through the dipstick opening.Also available as complete oil chnage set OCK 1.
Accessory for MARCO oil-change gear pumps:The plastic oil-change suction tubes allow a simple vacuum for sucking old oil through the dipstick opening in the engine block.Included: set with two tubes, L = 80cm.Diameter D = 6mm and 8mm.
Heavy duty gear pump. Ideal for oil change and transport of liquids of high viscosity.Self priming up to 1,5 m, not dry self priming.Weight 2,2 kg.With smart touch panel, allows reversing the pump for filling and draining.
Small MARCO UP3-S feed pump with bronze gears and integrated, practical on/off switch. Suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Delivery rate 15 litres per minute.Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3 without switch or as transportable feed pump set MARCO UP3-CK. See under similar products.