Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.Equipped with a rubberised, ergonomic handle.
Patented professional hand tool with which the lateral flanks of deck joints can be sanded quickly and effectively or, in the case of a restoration, the remnants of old joint compound are sanded off to create a clean new adhesive surface in the joint. The teak handle glides gently over the deck and the height-adjustable guide plate ensures that the self-adhesive sandpaper strip has even pressure and that sanding is done exactly at a 90° angle. Supplied complete with 15 strips of sandpaper (60 grit).
Even seams for the teak deck with the knife for the professional floor fitters: the MOZART push off knife cuts projecting areas on the seams off without problems.With teak decks getting older the wood is wearing off faster than the joint sealer. The problem: water is collecting, the deck is discoloured.Appropriate for restorations as well as relaying of decks.Available as an option: spare blades (5 pieces) and a leather quiver for the belt with space for the knife and 1 set of spare blades.
Practical applicator developed by teak deck specialists TDS for the precise filling of deck joints. The caulking aid can be screwed onto standard cartridge nozzles using a self-tapping plastic internal thread. Approx. 10-15 mm of the tip of the cartridge nozzle must be cut off beforehand. The skid-shaped nozzle on the wide underside is inserted into the joint and enables more controlled guidance when applying the joint sealant, saves material and limits the amount of sanding required later. Thanks to its rounded tip, the applicator enables a perfectly rounded joint. With sealing cap. After use, the applicator should be cleaned with a cloth and acetone and then closed with its cap.The white cartridge spout shown is not included. Available for 4, 5 and 6 mm joints. The corresponding width is labelled on the adapter.
Professional deck fix for the installation of bar decks, developed by teak deck specialists TDS. Simplifies the uniform adjustment of the joint width. The spacers have a drilled hole and can be fixed directly in the joint with a wood screw (not included) to prevent slipping.Available in packs of 100, each for 4, 5 and 6 mm joints.
Seam scraper with stainless steel blade and plastic handle.Broad blade for scraping a plain surface. The pointed blade is a perfect tool for scraping of deck seams.
Ergonomic shaped scraper for the scraping and cleaning of grooves. The doubled blade is equipped with a roughened surface and can be employed either single (for narrow grooves) or double (for wide grooves). Spare blades (3 pieces per set) are available.
