Reefing hook TDS | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	length (mm)	Price (unit)	Delivery time	Note list	Buy

Description

Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.
Equipped with a rubberised, ergonomic handle.

Downloads

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

TDS Marine Deck Caulkling Sealant

TDS Marine Deck Caulkling Sealant

TEACKDECKING SYSTEMS deck caulk SIS440 was developed by professional teak deck installers over 30 years ago. The 1-component, air-moisture hardening silane-based deck joint compound is very well suited for deck joints of 3-10 mm width.The TEAKDECKING SYSTEMS deck caulk runs very well during application and does not shrink during hardening. When hardened, it is easy to sand, extremely flexible and highly resistant to UV light. A primer is not recommended for teak deck caulking. However, the joints must be well sanded and cleaned with acetone. An inlay masking tape is recommended to prevent 3-flank adhesion.Properties:Film forming time: 20 - 40 minutes,Elongation at break: 850 %,Shore A hardness: 38-40°,Tensile Strength: 2.0 mm².Please observe the processing instructions on the data sheets.Important! When using the cartridge, first cut the tip at an angle. Then insert a suitable pointed object (e.g. a nail or screwdriver) into the spout and pierce the foil seal generously.

From €24.75 *

TDS deck joint applicator

TDS deck joint applicator

Practical applicator developed by teak deck specialists TDS for the precise filling of deck joints. The caulking aid can be screwed onto standard cartridge nozzles using a self-tapping plastic internal thread. Approx. 10-15 mm of the tip of the cartridge nozzle must be cut off beforehand. The skid-shaped nozzle on the wide underside is inserted into the joint and enables more controlled guidance when applying the joint sealant, saves material and limits the amount of sanding required later. Thanks to its rounded tip, the applicator enables a perfectly rounded joint. With sealing cap. After use, the applicator should be cleaned with a cloth and acetone and then closed with its cap.The white cartridge spout shown is not included. Available for 4, 5 and 6 mm joints. The corresponding width is labelled on the adapter.

From €19.90 *

TDS deck fix (100pcs)

TDS deck fix (100pcs)

Professional deck fix for the installation of bar decks, developed by teak deck specialists TDS. Simplifies the uniform adjustment of the joint width. The spacers have a drilled hole and can be fixed directly in the joint with a wood screw (not included) to prevent slipping.Available in packs of 100, each for 4, 5 and 6 mm joints.

From €59.90 *

MAXI-scraper

Inexpensive aluminum scraper with grippy soft handle and extra manual knob. Length, 290 mm. Weight, 260 g. Blade of hardened tool-grade steel, 65 mm wide.

€17.90 *

Seam scraper

Seam scraper with stainless steel blade and plastic handle.Broad blade for scraping a plain surface. The pointed blade is a perfect tool for scraping of deck seams.

€12.50 *

Seam scraper / cleaner

Seam scraper / cleaner

Ergonomic shaped scraper for the scraping and cleaning of grooves. The doubled blade is equipped with a roughened surface and can be employed either single (for narrow grooves) or double (for wide grooves). Spare blades (3 pieces per set) are available.

€12.50 *

Seam sander TDS

Seam sander TDS

Patented professional hand tool with which the lateral flanks of deck joints can be sanded quickly and effectively or, in the case of a restoration, the remnants of old joint compound are sanded off to create a clean new adhesive surface in the joint. The teak handle glides gently over the deck and the height-adjustable guide plate ensures that the self-adhesive sandpaper strip has even pressure and that sanding is done exactly at a 90° angle. Supplied complete with 15 strips of sandpaper (60 grit).

€49.00 *

TESA seam covering tape

TESA seam covering tape

Special tape for attaching to the surface of the seam bottom to hinder three-edge adhesion. Rolls of 50 m.

From €4.86 *

Acetone

Cleans tools, paint brushes and other working material. Effective for metal cleaning, epoxies, polyester resin and fiberglass. Can be used as thinner for many products. Degreases sanded surfaces.

€8.90 *

More Products from Category Sanding & scapping tools

Abrasive fleece

Abrasive fleece

High-quality sanding pad for cleaning, creating a matt finish, or finishing surfaces.You can adjust the finish:lighter but more even abrasion, and thus better paint adhesion.Ideal for intermediate sanding, quick and effective, no need to replace sandpaper, long life.Suitable for hand and machine sanding. Pads: 152 x 229 mm.

From €3.75 *

Abrasive strips MIRKA ABRANET

Abrasive strips MIRKA ABRANET

The ABRANET abrasive from the Finnish company MIRKA enables virtually dust-free sanding thanks to its mesh structure. The low heat development prevents clogging. The materials used (aluminum oxide on polyamide fabric) guarantee a long service life. Can be used with any commercially available sanding machine and the MIRKA sanding mouse. The multiple perforations always ensure optimum dust extraction and your work area remains clean. The hook-and-loop fastening allows the abrasive to be changed quickly. Sanding strips: 70 x 125 mm or 81 x 133 mm.

From €1.25 *

BAHCO scraper ERGO MAXI 665 doublehand

BAHCO scraper ERGO MAXI 665 doublehand

Strong scraper with soft ergonomically shaped handle and broad tool edge.For doublehand use. Exchangable, reversible, convex sharpened blades of COROMANT carbide steel.

€56.91 *

BAHCO scraper ERGO MINI 625

BAHCO scraper ERGO MINI 625

Very slim scraper with soft ergonomically shaped handle and thin tool edge.Delivery with exchangable, reversible, convex sharpened blades of COROMANT carbide steel.Comes with plastic sheath.

€40.90 *

BAHCO scraper ERGO UNIVERSAL 650

BAHCO scraper ERGO UNIVERSAL 650

Scraper with soft ergonomically shaped handle and middle sized tool edge. Exchangable, reversible, convex sharpened blades of COROMANT carbide steel.

€43.49 *

Blades for boat and molding scraper

Blades for boat and molding scraper

Hardened and sharpened blades, galvanized steel.

From €10.50 *

blades for scraper BAHCO 625 MINI

blades for scraper BAHCO 625 MINI

Spare blades for BAHCO scraper 625 MINI.Made of COROMANT steel.Different shapes are available and may suit for complicated applications: - triangle blade (25mm) with three sharp edges, - round blade, - teardrop shaped blade with very sharp edge, - pear shape blade with roundish edge (to scrape rounded grooves).

From €22.80 *

Boat and molding scraper

Boat and molding scraper

With hardened and sharpened triangular edge, galvanized steel with beechwood handle.Entire length 270 mm.

From €15.90 *

Coarse cleaning discs 3M BRISTLE DISC

Coarse cleaning discs 3M BRISTLE DISC

The material of the 3M BRISTLE DISC, full layer of abrasive grain, is outstandingly adapted for cleaning, finishing, burring and polishing of surfaces.The product structure "all of a piece" prevents single component parts from disintegrating and thereby helps to make the disc more secure than existing products.The high quality cleaning discs do not require high surface pressure to be effective and therefore can last longer.M14 internal thread for the angular grinder, 12.000 rpm max.

From €51.90 *

Coarse cleaning discs 3M SCOTCH BRITE

Coarse cleaning discs 3M SCOTCH BRITE

Clean & Stripe cleaning discs made by 3M SCOTCH BRITE are outstandingly adapted to remove rust and other oxides, lacquers or growth.Available are two versions:type DG for clamping mandrels (drills) with 4.000 rpm max.and type RD for angular grinders with 10.000 rpm max.They are made up of coarse granular abrasive and an adapted binding agent.Ideal for work on the hull, keel, rudder, propeller et cetera; also appropriate for GRP boats.

From €18.94 *

Corund

High-quality corundum sandpaper that won't clog up with sanding dust. Intended for hand and machine sanding. We recommend the matching handle for hand-sanding. Available grits: 80, 100, 120, 180, 220.

From €1.00 *

Double end scraper

Double end scraper

Made from tool-grade steel. Hardened cutting edge (50 HRC), sharpened. Cutting edge, 75 mm, length 270 mm, height 65 mm.

€14.95 *

Gooseneck scraper

Gooseneck scraper

Scraper from tool steel, hardened.

€5.50 *

Grindstone

Combination stone of electro-corundum. Highest quality for water or oil. One side rough, one fine.

€15.90 *

Hand scraper

Small, handy scraper with replaceable blade.

From €15.90 *

Handle for corund sandpaper

Handle for corund sandpaper

Practical handle for hand-sanding. The light plastic handle holds the matching corundum sandpaper (or regular sandpaper). The long sanding surface is used with foam materials that hold their shape and is intended to create an exceptionally good finish. Sanding surface 230 x 80 mm.

€11.20 *

HERMES Velcro Sanding Block

HERMES Velcro Sanding Block

Practical professional hand sanding block from the well-known manufacturer of abrasives HERMES. This sanding block makes it easy to sand exactly in corners and angles even when sanding by hand. The sanding block has a Velcro surface on both sides for Velcro sanding pads or sanding grids (e.g. Mikra ABRANET art. no. 2383-...). It consists of hard foam on one side and softer foam on the other and is therefore suitable for different surface structures. The matching HERMES sanding pads OA708 with tricot have a 280 grit size.

€23.60 *

Klett-Halter 3 Finger für Schleifscheiben Ø150 mm

Klett-Halter 3 Finger für Schleifscheiben Ø150 mm

Hand sanding block for Velcro sanding discs Ø150 mm. This makes sanding small corners child's play. No slipping of the abrasive thanks to the Velcro connection, durable design

€17.90 *

MAXI-scraper

Inexpensive aluminum scraper with grippy soft handle and extra manual knob. Length, 290 mm. Weight, 260 g. Blade of hardened tool-grade steel, 65 mm wide.

€17.90 *

Reefing hook TDS

Reefing hook TDS

Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.Equipped with a rubberised, ergonomic handle.

€54.89 *

Sanding block

This cork sanding block is the traditional aid for getting a good flat finish from the sandpaper when hand-sanding.Skin-friendly cork, dimensions: 120 x 60 x 35 mm.

€5.90 *

Sanding block MIRKA

Sanding block MIRKA

The perfect tool for clean, low-fatigue work: the ergonomic shape of the sanding mouse with a particularly non-slip surface makes sanding much easier.The integrated suction unit with regulation greatly reduces the health risks associated with hand sanding in particular.The service life of the abrasive is also significantly longer thanks to the extraction system.Quick abrasive change thanks to Velcro system. Available in two sizes:-Velcro surface 70 x 125mm and round Velcro discs D= 150mmThe matching, very flexible, 4 m long suction hose can be connected directly to any vacuum cleaner thanks to a rubber cone without any additional adapters.

From €28.91 *

Sanding block rubber

Sanding block rubber

This rubber sanding block is a practical aid for hand-sanding. The sandpaper is held reliably by steel pins. The sanding surface is flat, the grip surface rounded to be user-friendly. Black, sanding surface 130 x 70 mm.

€6.50 *

Sanding discs MIRKA ABRANET

Sanding discs MIRKA ABRANET

The ABRANET abrasive from the Finnish company MIRKA enables virtually dust-free sanding thanks to its mesh structure. The low heat development prevents clogging. The materials used (aluminum oxide on polyamide fabric) guarantee a long service life. Can be used with any commercially available sanding machine and the MIRKA sanding mouse. The multiple perforations always ensure optimum dust extraction and your work area remains clean. The hook-and-loop fastening allows the abrasive to be changed quickly. Round sanding discs, particularly suitable for random orbital sanders. Diameter 125 mm or 150 mm.

From €1.80 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.