- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
2710-300 TDS Decksfugenmasse SIS440 300ml-Kartusche schwarz
2710-300 TDS Decksfugenmasse SIS440 300ml und 600ml
2710-300 TDS Decksfugenmasse SIS440 Anwenderhinweis
Teakdecking System deck joint sealant SIS440 was developed over 30 years ago by professional teak deck installers. The 1-component, silane-based, moisture-curing deck joint sealant is very suitable for deck joints 3-10 mm wide.
The joint sealant flows very well during application and does not shrink during curing. Once cured, it is easy to sand, extremely flexible and highly UV-resistant. A primer is not recommended for teak deck grouting. However, the joints must be sanded well and cleaned with acetone. To avoid 3-edge adhesion, an inlay masking tape is recommended.
Properties:
- Film formation time: 20 - 40 minutes.
- Elongation at break: 850 %.
- Shore A hardness: 38-40°,
- Tensile strength 2.0 mm².
Please observe the processing instructions on the data sheets.
Important! When using the cartridge, first cut the tip at an angle. Then insert a suitable pointed object into the spout and pierce the film seal generously.
from €26.55*
| Quantity | Unit price | Base price |
|---|---|---|
| To 11 |
€29.50*
|
€96.75* / 1 Liter |
| From 12 |
€26.55*
|
€87.08* / 1 Liter |
Prices incl. VAT plus shipping costs
| Art. No. | packaging | colour | Unit price | Delivery time | Note list | Buy |
|---|
Description
Teakdecking System deck joint sealant SIS440 was developed over 30 years ago by professional teak deck installers. The 1-component, silane-based, moisture-curing deck joint sealant is very suitable for deck joints 3-10 mm wide.
The joint sealant flows very well during application and does not shrink during curing. Once cured, it is easy to sand, extremely flexible and highly UV-resistant. A primer is not recommended for teak deck grouting. However, the joints must be sanded well and cleaned with acetone. To avoid 3-edge adhesion, an inlay masking tape is recommended.
Properties:
- Film formation time: 20 - 40 minutes.
- Elongation at break: 850 %.
- Shore A hardness: 38-40°,
- Tensile strength 2.0 mm².
Please observe the processing instructions on the data sheets.
Important! When using the cartridge, first cut the tip at an angle. Then insert a suitable pointed object into the spout and pierce the film seal generously.
Downloads
| CLP Regulation | |
|---|---|
| Symbols | |
| Signalword | Attention! |
| H phrases | H317 |
More Products from Category TEAKDECKING SYSTEMS
