During docking or anchoring, solid, classic fittings made of brass, bronze and galvanised steel ensure that dock or anchor lines run smoothly. By using fairleads, snatch cleats and mid-rail cleats, mooring lines don't suffer from rubbing and chafing and hold their position. When anchoring, the anchor chain or anchor line should not cause any damage to the hull and deck and should be easily let out or hauled in. For this reason, it should be passed through appropriate fittings such as anchor hawse holes, stemhead rollers, bow rollers or fairleads. A yacht with a chain locker also requires a chain pipe mounted on the deck of the vessel. In order to prevent water from entering the interior of the boat when the chain is being pulled in or in rough seas, our deck chain pipes are fitted with removable covers or hinged lids.
Fairleads, hawses & chain pipes
Heavy beautifully-shaped bronze chocks, hand-made in a British workshop.Sand cast, hand polished.Handed version, not locking - please check the diagram to choose the right or left version.
Heavy, beautiful bronze fairlead made by hand in Britain.Sand-cast, hand-polished.Straight design.
Handed fairlead: Heavy bronze, handmade in Britain.Sand-cast, hand-polished.Lipped design with lip to protect the coaming from rubbing lines.The lip may be installed inside or outside of the bulkward.Use the diagram to choose the right or left version.
Handed "lock over" fairlead: Heavy bronze, handmade in Britain.Sand-cast, hand-polished.Lipped design with lip to protect the coaming from rubbing lines.The "lock over" design avoids slipping of the line.Use the diagram to choose the right or left version.
Angled fairlead made from high-pressure die-cast brass with polished finish.Small sizes with fixing holes, size 300 mm with stud bolts.Avaialble for right or left mounting - please consult the drawing.A chafe plate is available for the 150 mm size (Art-Nr. 1687-002).
Slim cast-brass fairlead.The overlapping lips hold the line securely.Polished-brass finish.Angled design: Use the diagram to choose the right or left version.
Protective polished brass ledge guarding against chafe and abrasion, it protects the coaming from chafing by the ropes.Matching the brass fairlead 1697-150 and 1697-151.
Thin fairlead made from cast stainless steel (AISI 316).Polished finish.Straight opening with overlapping lips to secure the line. Choose the appropriate version using the diagram.
Heavy tapered chock with locking bar.Made from cast bronze, tumbled matte surface. The stainless steel locking bar hinders the line from jumping out of the chock.The bar cannot be lost. Bar diameter 8 mm.The mounting plate is easily fitted.Attached with three countersunk fasteners, max. D = 6 mm.
Elegant and very functional combination of a cleat and two chocks.Mounts on the toerail or deck coaming. Made from cast marine bronze, tumbled matt finish. Made in the USA, this fitting works well as a spring line cleat.The base of the fitting is wider than the top, which allows a good fit in a tapered toerail and ensures a solid fit.Mounted using five countersunk holes, D = 6 mm.A quality product from the American Manufacturer SPARTAN.
Chock for the toerail or deck coaming.Very well suited as spring-line lead.Made from cast bronze, tumbled matte finish.For coaming widths of 16 mm.
Deck chock, type G in very heavy, straight form. Made from cast bronze, tumbled matt finish. Mounting through two countersunk screws on each side. Available as left or right version. A product of the American traditional manufacturer SPARTAN.
Sunken fairlead, to be set into the coaming, with overhanging lip to protect the coaming.Polished bronze.Straight opening.
Deck chocks with strong heads.Cast bronze, polished finish.Straight passage in left and right design.
Cast-brass deck chock.With triangular mounting plate for mounting on the bow or stern.Polished or chromed brass finish.
Slim bow chock, with light, streamlined finish, asymmetric mounting plate.Polished or chromed brass.
Straight fairlead, made from cast brass.Polished or chromed finish.
Angled cast-brass fairlead with beautifully rounded sides, very rope-friendly.Polished or chromed finish.Available in right or left designs - please consult the diagram.
Sloping lip for recessing into the bulwark.Heavy version made of hand-polished cast bronze from the traditional company DAVEY London.Optionally left or right bulwark lip. On the drawing you can see which version you need where.
Heavy sunken fairlead, to be set into the coaming.Sand-cast from bronze, hand-polished. Straight opening.Wide or narrow version.
Bronze mooring pipe with oval design, made from heavy, polished bronze.For a complete through-rail fitting, order two pieces (for inside and outside).Comes undrilled, which allows various mounting variations: With wood screws, threaded screws or copper rivets.When riveting, after a good polishing the rivets will be almost invisible.
Triangular transom hawsehole or stern pipe.Made of polished stainless steel.
Side hawse hole, oval design with stainless steel stay bolts. Made from polished stainless steel (AISI 316).
Heavy hot-dip galvanized hawse pipe.Two piece, with beveled inlet port. Angle, approximately 50í.
Heavy round hawse pipe for installation in the bulwark.For cable or chain.Made from high-tensile cast bronze, tumbled matt finish.A product of the American manufacturer SPARTAN.
Heavy oblong bulwark fairlead with crossbar (depth 27 mm) for flush installation into the bulwark. Optional a dimension-matched, flush-mounted backing ring with cleat (length 255 mm, for rope diameters up to max. 20 mm) is available separately. These classic fittings are made of dark cast bronze with a fine matte tumbled finish and are manufactured in Europe.Supplied undrilled.
Heavy, oval hawsepipe with bar (depth 63 mm) for embedding in the bulwark or for riveting. Supplied with matching counter ring. Cast steel, hot-dip galvanised with four 10 mm holes.DimensionsT: 63 mm depth D2: 124 mm internal length D1: 195 mm external lengthH2: 72 mm internal height H1: 145 mm external height weight: 6 kg
Straight chain inlet, made of heavy hand polished cast brass.The cover is loose with a slot for the chain and an attachment eye for a safety chain or safety lanyard.The deck flange of this hawse has a flat bar for recessing, for a secure fit in the deck.
Robust bow roller.Attached to the stern, it guides the anchor cable or anchor chain over the bow when deploying and retrieving the anchor. It ensures defined guidance of the anchor gear and reduces friction and wear on deck and bow fittings.Made of black hard rubber, drilled.
Chain pipe of cast brass for vertical or horizontal mounting. The large opening allows the stowage of a small folding anchor or an anchor line. Gutter depth approx. 10 mm. Weight 820 g. Polished or chromed brass.
Chain pipe in a curved design made from polished A4 stainless steel with a slotted hinged lid.
Chain Pipe (hawsepipe) of bronze, with cover.Screws onto the deck.Classic, oval shape.The cover is secured with a brass chain. Inside the cover is a stainless steel hook, on which the chain end can be hung.Made of cast bronze, matte tumbled.Made in the USA by the traditional manufacturer SPARTAN.
Heavy-duty fitting with chain roller, made of hand-polished bronze by the traditional company DAVEY London (1108). The body is screwed to the side of the stem. Can be mounted on both sides.The axle (bolt) of the roller is also screwed through the stem (complete with washer and nut).
Strong chain pipe of hand-polished cast bronze. Bent shape, slitted cover with hinge, deck flange with a small gutter for a secure sit. A classic design that is a piece of art on every foredeck!
Straight chainpipe of polished bronze for chains 10 - 13mm. Straight functional shape. Loose cover with two different-width slits. Inside, the cover has a strong eye, on which the chain end can be attached. The safety chain is not part of the order. This hawsepipe has a deck flange without gutter and sits on the deck.
Large, robust roller fitting from the traditional company DAVEY London for attachment to the bowsprit (1128).The fitting is made of polished gunmetal and is attached to the starboard side of the bowsprit / jib boom. Pre-drilled holes with a diameter of 9 mm are provided for three screws. In addition, the 13 mm bolt extends through the bowsprit and is secured with a washer and nut (both are included in the scope of delivery).The roller has a diameter of 65 mm and is suitable for 8 mm and 10 mm chain.
Large, very robust bow roller fitting from the traditional company DAVEY London (1123).The fitting made of polished cast bronze is placed on the deck and fastened with four screws in pre-drilled holes (diameter 6 mm).A retaining bolt (not included) fits into the upper 5 mm hole to secure the anchor.
A real eye-catcher on the forecastle: classic bow roller fitting for guiding the anchor chain on the stem from the traditional company DAVEY London (1125).Made from cast bronze and hand-polished.Solid bronze chain roller. Strong base plate: The fitting is placed on the deck or on the stem head.
