Tools for boatbuilders

FEIN cutting blade:For quick and safe removal of deck caulking. Also for problem areas like cabinhouses, bollards, gunwales, cleats and curves. STARLOCK: this is the new system standard for oscillating electric tools: fast parts change combined with a perfect power transmission. The STARLOCK receptacle also fits the older FEIN-MULTIMASTER as well as the "Multi Tools" of companies such as BOSCH, Makita, Hitachi, Metabo, AEG, Skil et cetera.

The FEIN Multimaster from is a versatile power tool in uncompromising FEIN quality.Not only on board, the universal tool with oscillator technology makes manual work easier and offers convincing solutions for difficult work situations: as a grinder, as a polisher, as a saw for almost all materials even in restricted spaces, for processing joints and for cutting and slicing.The FEIN Multimaster has been continuously improved and has the best characteristics of a multitool: it is low-vibration, relatively quiet and very durable.The powerful FEIN Multimaster MM 500 Plus Top Oscillator is supplied with an extraction device, an E-Cut Carbide Pro saw blade (32 mm) and other extensive accessories (see below) in a sturdy plastic system case.Details:Anti-vibration system: continuously safe and pleasant working thanks to minimal vibrations and outstanding noise insulation.StarlockPlus tool mounting: more work progress and greater precision thanks to 100% power transmission without losses.QuickIN: tool changes in less than 3 seconds thanks to the patented tool-free FEIN rapid clamping system.With the StarlockPlus tool mounting, you can access around 100 FEIN accessories from the Starlock and StarlockPlus performance classes, tools from other manufacturers equipped with the Starlock system can also be used.350 W FEIN motor. Powerful motor with a high copper content, which is suited to overload for a higher cutting speed and faster work progress.Tacho generator: constant speeds even under load and infinitely variable electronic speed control.Oscillations 10,000 - 19,500 rpm.Metal gearbox: ability to withstand high loading and outstanding service life because all the gearbox parts are made from metal.Mechanical interface: for stationary operation in the table or drill jig holder or for securing the depth stop.Industrial cable: large working radius thanks to finely stranded 5 metre rubber cable of industrial quality.Weight: 1,4 kg.Zubehör:1 E-Cut long-life saw blade (10 mm)2 E-Cut long-life saw blades (35 mm)2 E-Cut long-life saw blades (65 mm)1 E-Cut carbide Pro saw blade (32 mm)1 carbide saw blade (diameter 75 mm)1 HM rasp (triangular)1 Stopper knife1 Sanding plate with holeswith 5 sanding sheets, with holes for each of grit sizes 60, 80, 120, 1801 dust extraction device1 plastic carrying case

7-part accessory set for use in the marine sector for interior work, maintenance and repairs to yachts.Suitable for all multitools with a StarlockPlus or StarlockMax fitting.Contents:1 x Carbide file, width 10 mm1 x E-Cut long-life saw blade, width 10 mm1 x E-Cut long-life saw blade, width 65 mm1 x E-Cut universal saw blade, width 44 mm1 x Cutting blade, width 5 mm1 x Cutting blade, width 3 mm1 x Carbide saw blade, diameter 75 mm

Double-row Japan teeth for all wooden materials, plasterboard and soft plastics. The fastest cutting speed and maximum precision.STARLOCK: this is the new system standard for oscillating electric tools: fast parts change combined with a perfect power transmission. The STARLOCK receptacle also fits the older FEIN-MULTIMASTER as well as the "Multi Tools" of companies such as BOSCH, Makita, Hitachi, Metabo, AEG, Skil et cetera.

Set teeth for all wood, plasterboard and plastic materials, high cutting quality and speed. Medium width, with waist for optimum cutting speed and good swarf removal.STARLOCK: this is the new system standard for oscillating electric tools: fast parts change combined with a perfect power transmission. The STARLOCK receptacle also fits the older FEIN-MULTIMASTER as well as the "Multi Tools" of companies such as BOSCH, Makita, Hitachi, Metabo, AEG, Skil et cetera.

The profile sanding set consisting of 1 holder and 6 different profiles: 1 V-form for 90° angle, 1 trapezium for tongue-and-groove connections, 1 for straight profiles, 1 for convex forms (large), 1 each for concave and convex forms (small), as well as 5 sanding sheets grit 80, 120, and 180. STARLOCK: this is the system standard for oscillating electric tools: fast parts change combined with a perfect power transmission. The STARLOCK receptacle also fits the older FEIN-MULTIMASTER as well as the "Multi Tools" of companies such as BOSCH, Makita, Hitachi, Metabo, AEG, Skil, et cetera.

Bimetal with corrugated universal teeth. Wide range of applications for sheet metal up to 2 mm, aluminium profiles, copper pipes, wood, plasterboard and plastics. Wide, with waist for optimum cutting speed and good swarf removal. STARLOCK: this is the new system standard for oscillating electric tools: fast parts change combined with a perfect power transmission. The STARLOCK receptacle also fits the older FEIN-MULTIMASTER as well as the "Multi Tools" of companies such as BOSCH, Makita, Hitachi, Metabo, AEG, Skil et cetera.

FEIN MultiMaster system box: Metal, without contents.Offers space for the MultiMaster and all necessary accessories.

FEIN sanding plate, perforated (for vacuum units): Triangular plates for FEIN MultiMaster.With Velcro attachments to hold the sandpaper. 2 pieces. STARLOCK: this is the new system standard for oscillating electric tools: fast parts change combined with a perfect power transmission. The STARLOCK receptacle also fits the older FEIN-MULTIMASTER as well as the "Multi Tools" of companies such as BOSCH, Makita, Hitachi, Metabo, AEG, Skil et cetera.

For quickly and cost-effectively sanding medium-sized surfaces. The alternative to eccentric or random sanders. No kick-back effect at edges. Easy to use, very good sanding capacity. Can be used with or without dust extraction. Plastic carrier plate for preventing damage and marks on the workpiece. Round shape, perforated version, hook and loop fastening.Scope of supply: 1 backing pad diameter 115 mm, with perforated sanding sheets, 2 each of grit 60, 80, 180.STARLOCK: this is the new system standard for oscillating electric tools: fast parts change combined with a perfect power transmission. The STARLOCK receptacle also fits the older FEIN-MULTIMASTER as well as the "Multi Tools" of companies such as BOSCH, Makita, Hitachi, Metabo, AEG, Skil et cetera.

Set teeth for all wood, plasterboard and plastic materials, high cutting quality and speed. Medium width, with waist for optimum cutting speed and good swarf removal. STARLOCK: this is the new system standard for oscillating electric tools: fast parts change combined with a perfect power transmission. The STARLOCK receptacle also fits the older FEIN-MULTIMASTER as well as the "Multi Tools" of companies such as BOSCH, Makita, Hitachi, Metabo, AEG, Skil et cetera.

Sandpaper, perforated or unperforated, for FEIN MultiMaster:Velcro attachment, adhered entirely with synthetic resin, high removal performance, for universal application on just about any material.Package of 50 pieces, sorted:10 pieces each of 80, 120, 180, 240 grit.Perforated sandpaper: The perforated sandpaper should be used with a perforated sanding plate to allow universal operation with vacuuming.

Sanding sheets for sanding fingers, with Velcro rapid attachment, fully bonded with artificial resin, high sanding capacity, corundum. For use on: wood, metal, soldered joints, fibreglass, plastic, paint, filler, leather. Set with 50 sheets (grain 60, 80, 120, 180, 240).

Bristle fleece for cleaning boat decks or cleaning/polishing anti-slip structures.

Felt polishing pad for polishing boat decks (gelcoat), chrome, stainless steel, aluminium, copper and copper alloys. 5 pieces.

Sanding sheets with 115 mm diameter, perforated, with hook and loop fastening, fully bonded with artificial resins for effective material removal.16 sanding pads per package.This tool fits only for older FEIN MULTIMASTER (produced before April 2016).

Filter bags for the FEIN DUSTEX 25 or the 25L vacuum cleaners. Pack of 5.

Felt polishing pad with quick Velcro fastening.Multiple usage: for the polishing of chrome, stainless steel, Polycarbonat materials as well as boat decks from gel coat and for the polishing off of paint scratches.

Packages of perforated sandpaper of 10 or 50 pieces each of 80, 120, 180 or 240 grit for FEIN MultiMaster:Velcro attachment, adhered entirely with synthetic resin, high removal performance, for universal applications on just about any material.The perforated sandpaper should be used with a perforated sanding plate to allow universal operation with vacuuming.

Polishing sponge, D=195 mm for backing pads with D=170 mm, M14 with hook and loop fastening system. Recommended working speed 500-1000 rpm.

Professional electric plane, intended for convex or concave, as well as for straight, surfaces.The plane can be used in carpentry and joinery, particularly in boatbuilding: Wherever (concave or convex) rounded and bent surfaces must be planed.The plane's light weight allows simple use in and out of the workshop.The curved plane comes with carbide inserts and adapter for vacuuming.Characteristics:- cutting width, 80 mm;- cutting depth, 0-3 mm;- minimum concave radius 450 mm,- minimum convex radius 400mm,- planing 16,500 U/min.;- Weight, 3.2 kg.

Special planer for shipbuilding. The flexible steel sole is adjustable with the hand knob, so that convex and concave surfaces can be edited. The plane is a replica of a Stanley plane from 1879. The double iron is lateral via a rocker arm and a knurled screw finely adjustable in the chip removal. Available either with a plane blade of 2.5 mm hardened tool steel (KUNZ No. 113) with approx. 61 HRC or with a specially hardened HSS steel blade (KUNZ No. 113S) with hardness approx. 65 HRC..

Spare parts for the KUNZ circular plane. Spare blades made from normal strength tool-grade steel or from HSS steel (specially hardened) for hardwoods.

Thin rabbet plane, made from gray cast iron (gunmetal) with straight-sharpened sole.Clean adjustment of the iron using finger screws.KUNZ - the trademark name for workshop-quality metal planes made in Germany.

Robust smoothing plane, also works as a one-handed plane.Body of gray cast iron (gunmetal) with cleanly sharpened straight sole.The iron is adjustable using a finger screw. KUNZ - the trademark name for metal planes made in Germany.

Small pocket plane. Well suited for simple work in hard-to-reach places. Of high quality, made in Germany. The body is made entirely of gray cast iron with a plane-edged straight bottom. Simple tool-steel iron. Deliverable in two versions: With a steel handle for good handling or without handle.

Spokeshave with finely adjustable blade for universal application. With bent handle, cast-iron body protected with green epoxy, with ground sole. Replacable plane irons of tool-grade steel. Spare irons available.

Spokeshave with half-circle (convex) blade for special application possibilities, for example, planking a frame. With bent handle, cast-iron body protected with green epoxy, with ground sole. Replacable plane irons of tool-grade steel. Spare irons available.

Spokeshave with half-circle (concave) blade for special application possibilities, for example, oar or paddle building. With bent handle, cast-iron body protected with green epoxy, with ground sole. Replacable plane irons of tool-grade steel. Spare irons available

The scraper plane (KUNZ No.80) with its 2 curved handles Griffen is a versatile, useful tool to scrape and clean veneer and wooden panels.The planing iron is a burnisher 1,1mm thick, with a chamfer angle of 90°.For sharpening an edge is formed with a sharpening tool.

Spokeshave with finely adjustable blade for universal application. With bent handle, cast-iron body protected with green epoxy, with curved sole. Replacable plane irons of tool-grade steel. Spare irons available (article-no. 2121-100).

A plaster plane and a roughing bench are part of the basic equipment of every woodworking shop.The planes are manufactured according to the Bailey principle; the plane body is made of gray cast iron, stress-relieved and green epoxy-coated, the frog is chrome-plated.The planing surfaces are ground absolutely flat - flatness of the sole less than 0.1 mm.The adjustable jaw opening, fine iron adjustment using a knurled screw and lateral adjustment make the planes versatile and user-friendly.Spare blades for the planers can be found in the tableKUNZ - the brand name for metal planes "made in Germany" in solid, workshop-compatible quality.

Heavy scraper plane "bench plane style" for final finish operations, blade can be locked at any angel between 85° and 120°. Usefull tool for felting and sharpening veneer- and wood surfaces. The blade ist made of steel and can be sharpened with a grindstone. KUNZ - the trademark name for metal planes made in Germany.

High quality scraper with carbide edge and vacuum attachment. For dust-free, environmentally friendly removal of bottom paint, etc. Available with double-sided blades and adapter for vacuum hose. Length 240 mm. Spare blades come in pairs.

Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.Equipped with a rubberised, ergonomic handle.

Patented professional hand tool with which the lateral flanks of deck joints can be sanded quickly and effectively or, in the case of a restoration, the remnants of old joint compound are sanded off to create a clean new adhesive surface in the joint. The teak handle glides gently over the deck and the height-adjustable guide plate ensures that the self-adhesive sandpaper strip has even pressure and that sanding is done exactly at a 90° angle. Supplied complete with 15 strips of sandpaper (60 grit).

High-quality sandpaper from Germany.Works well for hand and machine sanding.Comes in rolls: 11 cm wide. Rolls up to 50 m. longCorundium paper with synthetic resin binding:Comes in 80, 120, 150, 180 grit.Comes in pieces by the meter or as an entire roll for a better price. In order to get the better price, please order in lengths divisible by 50 meters.

High-quality sandpaper of German construction.Well adapted for hand and machine sanding.Silicone-carbide paper in waterproof synthetic resin binding. Comes in 80, 120, 180, 240, 320, 400, 600 grit.Sheets of 23 x 28 cm..

The ABRANET abrasive from the Finnish company MIRKA enables virtually dust-free sanding thanks to its mesh structure. The low heat development prevents clogging. The materials used (aluminum oxide on polyamide fabric) guarantee a long service life. Can be used with any commercially available sanding machine and the MIRKA sanding mouse. The multiple perforations always ensure optimum dust extraction and your work area remains clean. The hook-and-loop fastening allows the abrasive to be changed quickly. Sanding strips: 70 x 125 mm or 81 x 133 mm.

With hardened and sharpened triangular edge, galvanized steel with beechwood handle.Entire length 270 mm.

Ergonomic shaped scraper for the scraping and cleaning of grooves. The doubled blade is equipped with a roughened surface and can be employed either single (for narrow grooves) or double (for wide grooves). Spare blades (3 pieces per set) are available.

High-quality sanding pad for cleaning, creating a matt finish, or finishing surfaces.You can adjust the finish:lighter but more even abrasion, and thus better paint adhesion.Ideal for intermediate sanding, quick and effective, no need to replace sandpaper, long life.Suitable for hand and machine sanding. Pads: 152 x 229 mm.

Hardened and sharpened blades, galvanized steel.

Scraper with soft ergonomically shaped handle and middle sized tool edge. Exchangable, reversible, convex sharpened blades of COROMANT carbide steel.

The material of the 3M BRISTLE DISC, full layer of abrasive grain, is outstandingly adapted for cleaning, finishing, burring and polishing of surfaces.The product structure "all of a piece" prevents single component parts from disintegrating and thereby helps to make the disc more secure than existing products.The high quality cleaning discs do not require high surface pressure to be effective and therefore can last longer.M14 internal thread for the angular grinder, 12.000 rpm max.

The ABRANET abrasive from the Finnish company MIRKA enables virtually dust-free sanding thanks to its mesh structure. The low heat development prevents clogging. The materials used (aluminum oxide on polyamide fabric) guarantee a long service life. Can be used with any commercially available sanding machine and the MIRKA sanding mouse. The multiple perforations always ensure optimum dust extraction and your work area remains clean. The hook-and-loop fastening allows the abrasive to be changed quickly. Round sanding discs, particularly suitable for random orbital sanders. Diameter 125 mm or 150 mm.

The perfect tool for clean, low-fatigue work: the ergonomic shape of the sanding mouse with a particularly non-slip surface makes sanding much easier.The integrated suction unit with regulation greatly reduces the health risks associated with hand sanding in particular.The service life of the abrasive is also significantly longer thanks to the extraction system.Quick abrasive change thanks to Velcro system. Available in two sizes:-Velcro surface 70 x 125mm and round Velcro discs D= 150mmThe matching, very flexible, 4 m long suction hose can be connected directly to any vacuum cleaner thanks to a rubber cone without any additional adapters.

Spare blades for BAHCO scraper 625 MINI.Made of COROMANT steel.Different shapes are available and may suit for complicated applications: - triangle blade (25mm) with three sharp edges, - round blade, - teardrop shaped blade with very sharp edge, - pear shape blade with roundish edge (to scrape rounded grooves).

Strong scraper with soft ergonomically shaped handle and broad tool edge.For doublehand use. Exchangable, reversible, convex sharpened blades of COROMANT carbide steel.

Seam scraper with stainless steel blade and plastic handle.Broad blade for scraping a plain surface. The pointed blade is a perfect tool for scraping of deck seams.

Scraper with unpainted wooden handle. The blade of hardened tool steel is riveted tightly, and carefully, slightly curved sharpened.

High-quality sandpaper of German construction.Well adapted for hand and machine sanding.Corundum paper in glued binding. Comes in 40, 60, 80, 100, 120, 150, 180 grit.Paper commodity 28 x 23 cm.

Combination stone of electro-corundum. Highest quality for water or oil. One side rough, one fine.

TERCOO is a rotating disk for the removal of rust, paint, tar, epoxy, paint, adhesives etc. from various materials such as steel, iron or other metals.The rubber disks may be attached to a standard drill and allow rust or paint removal, as thoroughly as sandblasting.The result is a sandblasted surface with the appropriate texture suitable for the application of a new protective coating.TERCOO provides the correct surface preparation for proper adhesion of new protective coatings.With revs of 1500 - max. 4000 RPM up to 6 sq.m. can be worked with a single disk in one hour. Available designs:Metal (brown): single disk, one pin row. Metal (brown): double disk, two pin rows. Metal (brown): triple disk, three pin rows.

Compressed air needle gun made by VON ARX, equipped with 12 needles of 3 mm diameter each. Professional tool for effective substrate preparation of steel constructions. Can also be used on uneven surfaces, corners, edges or weld seams. Fast hammering of the needles makes thick layers of paint, rust or scale flake off. The narrow, handy design of the needle gun also makes it possible to work on hard-to-reach places on board, for example the bilge area.The needle gun is connected to a compressed air supply and guided against the surface with light pressure so that the needles can work unhindered. Operating pressure: 6 bar.Air consumption: 96 l/min.Connection: 3/8".Weight: 1,3 kg.Comes in a black plastic case.

Ship scraper with long handle, ideal for scraping paint. High-quality tool made from tempered, hardened tool-grade steel with asharpened edge and sturdy wooden handle. The rust scraper blade with flat edge as well ashandles in three lengths are also available separately.

The TERCOO guiding rail with spacer makes the work with TERCOO scraper disk a great deal easier. The distance to the work part is adjusted by an adjusting screw, enabling one to work with little effort. The large handle adds additional strong grip. In combination with the TERCOO suction device the work - for instance below the waterline - is definitely made easier.

Suction device compatible with the TERCOO metal scraper disks. Minimises the rust, dust and paint particles produced from grinding and is recommended in addition to a face mask when working on or under the ship. Fits Hoovers with a hose diameter of 25mm. In combination with the TERCOO guiding rail with spacer the work - for instance below the waterline - is definitely made easier.

Classic chipping hammer with the two ends of the head rotated 90í from each other. Ideal for chipping rust on steel hulls or chains.With polished ash handle.Weight: 500 g.

Classic chipping hammer for manual derusting. With point and chisel. With its point, the pickhammer is particularly suitable for chipping heavy rust in corners, for a complete removal of deeply ingrained severe rusting and for cleaning weld seams.With polished ash handle.

High-quality tool made from tempered, hardened tool-grade steel, with sharpened edge. The scraper comes mounted. The blade (2157-080) with handle (D=35 mm) with 2 clamps is intended for use as a mallet.

The very powerful FEIN WPO14-25E angle polisher in a set with a TERCOO 8-fold blast wheel is the ideal "team" for large-scale rust removal work.The professional angle polisher is characterized in particular by the following features: speed control with high speed consistency thanks to a particularly powerful gearbox and a high-performance motor, a symmetrical housing with excellent ergonomics for right and left-handed operation, restart interlock and soft start.The 8-fold TERCOO blasting disc, with a special hexagonal holder, is designed for tough use and removes rust, tar and old paint. Supplied with special holder for handle mounting and protective plate in a system case.The TERCOO MULTI replacement discs are available in four versions:Article 2178-008 as a complete set with 8 blasting discs and a special shaft suitable for the FEIN angle polisherArticle 2178-009 as a set of 2 without shaft, for replacing individual discs (5°/15°).Article 2178-011 single disk 5°Article 2178-012 single disk 15°

Caulking irons made from tool grade malleable cast steel, oil hardened. Polished blade.These caulking irons are available only in straight form, with three different blade sizes. We offer all three irons in a set at a special reduced price.

Hand forged caulking irons for the boatbuilding professional or ambitious amateur. Straight design for caulking simple plank seams.Hardened blade. Blade width 45 - 50 mm, shaft diameter 16 mm, length approx. 170 mmWe have these caulking irons exclusively hand forged in a little workshp in Germanny. Small variations in dimensions may occur as a result of the manufacturing process.

Special tool for traditional boatbuilding. This old-style reefing hook is used to manually remove oakum and sealant from the seams of calendered ship planks. Especially for deep and long plank seams, this joint scraper has proven its worth compared to home-made scrapers such as bent screwdrivers. This tool guarantees long, powerful work, especially for large hull and deck restorations.We have these reefing hooks, as well as our caulking irons, made exclusively by hand in a small forge in Germany.

Hand forged caulking irons for the boatbuilding professional and ambitious amateur. Bent form for working on plank seams in hard-to-reach areas like keel and stem.Hardened blade. Blade width 45 - 50 mm, shaft diameter 16 mm, length approx. 170 mmWe have these caulking irons exclusively hand forged in a little workshop in Germany.Small variations in dimensions may occur as a result of the manufacturing process.

Hand-forged trunnel (spike iron, narrow caulking iron) for the boatbuilding professional and the demanding amateur.Straight version for caulking simple plank seams. The butt iron is used at the ends of the planks (butts).Blade hardened, blade width approx. 15 mm, shaft diameter 16 mm, length approx. 170 mm.We have these spike iron made exclusively by hand in a small forge in Germany.Due to the manufacturing process, slight dimensional deviations, especially in the blade thickness, are unavoidable.

Caluking malles with hardwood head with iron rings. The ashwood handle has a slightly extended head.Head diameter: 62 mmHed lenght: 240 mm.Handle lenght: 400 mm.The hammer should be stored damp or in water, so that the head doesn't dry out and the iron rings don't come loose.

Special caulking hammer with head of hard, white polyamide, without steel rings. The handle is made form ashwood.Head diameter: 62 mmHed lenght: 240 mm.Handle lenght: 400 mm.

Caulking iron, made to manufacturing specifications from tool-grade steel C45, forged.Blade hardened 50HRC. Dimensions: length 170 mm, shaft diameter 18 mm, blade width 60 mm.Straight design.

Cleanly turned wood mallet, made from white beech with ash handle. Barrel-shaped head and hand-friendly tapered handle. Intended for light caulking and general boatbuilding and carpentry work. Head diameter: 70 mmHead length 140 mmHandle length 250 mm Weight: 450 g

Caulking iron made to manufacturing specifications from tool-grade steel C-45, forged.Blade hardened 50HRC.Dimensions: length 170 mm, shaft diameter 18 mm, blade width 60 mm. Bent form for working on plank seams in hard-to-reach areas like keel and stem.

Axe with ash wood handle.

Hatchet with ash wood handle.

Crowbar with nail claw. Measurments: Length: 600 mm, depth: 21 mm, weight: 1.1 kg. Fire-prevention tool pursuant to the operation guidelines for "bettering the safety of traditional ships."

OCHSENKOPF quality tool, made of forged tool-grade steel, finely sharpened and painted.The handle supplied only needs to be fitted by the customer.Also available as a hollow adze (see matching articles).

OCHSENKOPF quality tool, made of forged tool-grade steel, finely sharpened and painted.The handle supplied only needs to be fitted by the customer.Also available as a flat adze (see matching articles).

Handle for carpenter's adze.The handle must be reworked and fit before use.

Small hand axe.Red lacquered head with a sharpened cutting edge on the one and a lever blade on the other side.The oval, insulated shaft of steel tube is force fitted into the head.

Classical fire axe in very strong professional quality.Red painted head with a sharpened cutting edge on the one and a lever blade on the other side.Oval shaft from ash wood, varnished transparent.The head is secured with two ring wedges and two tapered collars.Pursuant to DIN 149000 FA.

Quality tool from Germany. Built from a tool-grade steel alloy. With center point, two cutting edges and circumferential cutting edges.

Quality tool from Germany. Made from a tool steel alloy. With double relief cutting edges and circumferential cutting edges. Absolute professional drill for the highest accuracy.

Spiral bit 8 mm, HSS profi quality, made from varnished tool steel.

Strong batten for sailmaker's loft and lace bottom.Made of glass fiber reinforced polyester, rectangular cross-section 25 x 8 mm. These long battens are delivered rolled in whole lengths as forwarding goods.

Wooden folding ruler with steel links, self-locking. Scales in centimetres on both sides.Each link measures 22 cm.

Brass callipers: The so called "knob gauge" of brushed brass with long-lasting, etched inch and cm scales. Without Nonius. Belongs in every rigging bag, on every workbench and in the pockets of every rigger.

Heavy traditional divider: For drawing right angles, for marking circles and arcs, and for setting widths (plank widths, etc.) in boatbuilding. Professional tool of forged steel, straight with angled legs and hardened points. Fine, polished, through-threaded, milled legs. The radius can be set by means of a knurled screw on the arch. Max. opening: 305 mm

Sliding 'T' bevel with brackets made from beech wood with hollow groove, brushed brass ends.Strong steel blade with black finish, angle adjustment with a galvanized wing nut.

Traditional boatbuilding tool: For measuring plank wood depth or for measuring spars - for example, when measuring masts and booms for hoops. Tool-grade steel, fine and sheer. Max. wide: 450 mm

Essential for boat and ship builders and designers: Spline weight made of solid cast brass with rolled surface, weight 1.6 kg. The small lath nose is also suitable for narrow lofting battens. In American "whale" shape with recessed grip and wide tail piece for a secure rest. The underside is covered with felt.Dimensions (body): L x W x H: 155 x 45 x 50 mm.Available singly or as a set of 6 pieces (Please order 6 pieces at the favorable graduated price).In shipbuilding, Spline weights and lofting battens are used as aids for designing, drawing and optimizing line grids. The lofting batten serves as a ruler for curves, the spline weightweigh down and fix the specified points.

This carpenter's square is a professional tool, with legs of painted beech wood with fillet, hardened steel tongue with millimeter graduation, strongly riveted.

Sliding 'T' bevel with brackets made from aluminium with hollow groove.

Riveting hammer (punch hammer) for resistance when riveting.Exceptional quality, cast steel. With long flattened peen (8mm), flat face  and ash handle.

Rivet puller, round form. Thin professional tool for pulling copper disks on their corresponding rivets.Professional tool, made from hardened steel.To round off the rivet head you need the head maker 2291-...

Rivet head maker, round form. This thin profile tool for professional riveting forms the head of copper rivets in wooden planks.Hardened steel with polished groove. To properly set the rivet you need the rivet puller 2292-...

Riveting hammer of English make with ball shaped head to hammer down the copper nails and to shape the nail heads.Hammer head and ball shaped head are specially hardened and ground.Handle made from wood with an even grain.

Combination tool for striking rivet washers on nails and for forming the heads after trimming.

COX caulking guns are professional tools, made in England.Strong construction with hexagonal rod. The closed professional models with aluminum pipes, strong metal mechanism and strong handles of painted aluminum are intended both for cartridges and packs.

Spare nibs and other spare parts for PROFI caulking gun.

The COX skeleton gun is a professional tool for caulking. Made in England. Solid design with hexagonal rod.To be used with 310 ml standard cartridges.

Basic caulking gun.Made of laquered steel sheet. To be used with 310 ml standard cartridges.

SIKAFLEX guns are built by COX in England and are stable tools for professional use. The guns are made of aluminum pipes and have stable metal handles and sliding rods. They can be used for pouches up to 600 ml. Model BHP for hand use.

The SIKA KPL pneumatic dispenser is manufactured by COX in England, it is a stable, powerful tool for professional use.The pneumatic air of the Airflow dispenser acts directly on the cartridge piston, so that a usmooth discharge of the sealant is guaranteed. The working pressure is infinitely variable.The pneumatic dispenser is very lightweight and, together with the ergonomic handle, ensures easy and effective work.Technical data:Maximum thrust 1.35 kNPressure approx. 6.8 barAluminum cartridge tubeHandle made of epoxy-coated aluminumNozzle diameter 38 mmWeight 0.62 kgFor 310 ml cartridgeges

SIKAFLEX guns are built by COX in England and are stable tools for professional use. The guns are made of aluminum pipes and have strong handles. They can be used for packs (pouches) up to 600 ml. Model BLP for use with compressed air.

Practical accessories for standard plastic cartouches. 45° angle for nozzle tip.

Closing cap for standard cartridges. Delivery without nozzle tip.

Even seams for the teak deck with the knife for the professional floor fitters: the MOZART push off knife cuts projecting areas on the seams off without problems.With teak decks getting older the wood is wearing off faster than the joint sealer. The problem: water is collecting, the deck is discoloured.Appropriate for restorations as well as relaying of decks.Available as an option: spare blades (5 pieces) and a leather quiver for the belt with space for the knife and 1 set of spare blades.

Professional tool by TeakDeckingSystem (TDS) to remove old deck caulking or marine sealant from deck seams. A hook scraper, where the flanks can be sharpened and whose lower 3,5 mm wide edge can remove the material from the bottom of the seam.Equipped with a rubberised, ergonomic handle.

Patented professional hand tool with which the lateral flanks of deck joints can be sanded quickly and effectively or, in the case of a restoration, the remnants of old joint compound are sanded off to create a clean new adhesive surface in the joint. The teak handle glides gently over the deck and the height-adjustable guide plate ensures that the self-adhesive sandpaper strip has even pressure and that sanding is done exactly at a 90° angle. Supplied complete with 15 strips of sandpaper (60 grit).

This applicator eases the application of tape into seams. Through the various-width track wheels, you can use tape of 4, 5 and 6 mm widths.

Practical applicator developed by teak deck specialists TDS for the precise filling of deck joints. The caulking aid can be screwed onto standard cartridge nozzles using a self-tapping plastic internal thread. Approx. 10-15 mm of the tip of the cartridge nozzle must be cut off beforehand. The skid-shaped nozzle on the wide underside is inserted into the joint and enables more controlled guidance when applying the joint sealant, saves material and limits the amount of sanding required later. Thanks to its rounded tip, the applicator enables a perfectly rounded joint. With sealing cap. After use, the applicator should be cleaned with a cloth and acetone and then closed with its cap.The white cartridge spout shown is not included. Available for 4, 5 and 6 mm joints. The corresponding width is labelled on the adapter.

Ergonomic shaped scraper for the scraping and cleaning of grooves. The doubled blade is equipped with a roughened surface and can be employed either single (for narrow grooves) or double (for wide grooves). Spare blades (3 pieces per set) are available.

Seam scraper with stainless steel blade and plastic handle.Broad blade for scraping a plain surface. The pointed blade is a perfect tool for scraping of deck seams.

Professional deck fix for the installation of bar decks, developed by teak deck specialists TDS. Simplifies the uniform adjustment of the joint width. The spacers have a drilled hole and can be fixed directly in the joint with a wood screw (not included) to prevent slipping.Available in packs of 100, each for 4, 5 and 6 mm joints.

Wet wood must not be used in boat building, otherwise you run the risk of the material cracking, deforming, moulding or developing wood rot. With the HUMIDCHECK PRO you can easily and professionally check the wood moisture content. The device is also well suited for checking suspicious wooden parts on board for defects and rot. The HUMIDCHECK PRO can also be used at home to determine whether the stored firewood can already be burned in the stove effectively. The device has 8 calibration scales for approx. 150 types of wood. On the topside of the robust housing there are two measuring tips to be pressed into the wood. An additional external sensor can be driven deeper into the wood. A separate sensor simultaneously detects the temperature and takes it into account when measuring the material moisture. Measuring range 6 - 99.9%. Includes bag and batteries (2 x 1.5 AAA).