Solid hot-dip galvanized turnbuckle with closed sleeve and locking nuts.Terminals: fork / fork.The long thin body guarantees a large throw.From size M 22 up, the turnbuckle is forged with nice long and thin forks.Working load (SWL) = 1/5 of the breaking load. Test certificate available on request.Hint: The threads are partly cut again after hot-dip galvanizing and should therefore be well lubricated. After mounting and adjusting, we recommend covering the uncovered threads with a sleeve.
Turnbuckle, made from stainless steel (AISI316), electropolished.Metric threads, closed body with counter nuts. Welded forks with split-pin bolt on both ends. Measurement variations are possible.
Bronze turnbuckle. Classic design with open body.The turnbuckle is made from high-tensile waterproof aluminum bronze.Very high breaking strength.Particularly the distortion parameters (Rp02) are about double those of stainless steel.In addition, these turnbuckles can be turned under high loads without seizing up.Comes with metric or standard UNF threads. These turnbuckles are supplied from different manufacturers. This results in slight difference in surface polish.
Solid, hot-dip galvanized steel turnbuckle with closed body and counter nuts.One side fork terminal, one side eye terminal.The long, thin bodies guarantee a large throw.From size M 22 up in solid forged design with beautiful, long and thin fork.Working load (SWL) = 1/5 the breaking load. Test certification available on request.Hint: The threads are partly cut again after hot-dip galvanizing and should therefore be well lubricated. After mounting and adjusting, it is a good idea to cover the open threads with tape.
High-gloss polished turnbuckle with closed body, made from 1.4401 (AISI316) stainless steel by the Danish manufacturer BLUE WAVE. Design: welded forks on both sides with pins. Metric threads with counter nuts. Further models on request.
Heavy duty SELDEN turnbuckles with pressed stainless steel forks (typHASSELFORS) and a classic open body made from chromed aluminium bronze.The spar builder SELDEN developed this turnbuckle with UNF threads, because the combination of bronze body and stainless steel threaded forks guarantees that the turnbuckle can be turned, even under high loads, without seizing up.European brand-name product.Design: fork/fork. Further models on request.
Small turnbuckle with high breaking strength, made from manganese bronze.The open-body design allows easy installation by hand. The rods are stainless steel. Thread: BSF (British Standard Fine).
Solid, hot-dip galvanized steel turnbuckle with closed body and counter nuts.Eye and eye ends.The long, thin bodies guarantee a large throw.From size M 22 up in solid forged design with beautiful, long and thin fork.Working load (SWL) = 1/5 the breaking load. Test certification available on request.Hint: The threads are partly cut again after hot-dip galvanizing and should therefore be well lubricated. After mounting and adjusting, it is a good idea to cover the open threads with tape.