Curved mouth-operated fog horn of high-quality design, made by the traditional german manufacturer MARTIN.Entirely made from polished brass.With brass reed that produces a very intense sound.Brass mouthpipe with plasic cover (may be removed).Tuned to C'.
The Mini-TRUMP generates a very loud signal! Up to 100 dB(A) are possible by simply blowing this horn.A piece of safety gear, because it gives a good signal without an external energy source.Made from yellow plastic.The tone comes from blowing in a hole on the side.
Straight mouth-operated fog horn, entirely made from brass.Pr oduced by the german manufacturer MARTIN, of high-quality design.Brass mouthpiece and reed that can be unscrewed, re-tuned and replaced, if necessary.Very loud and intense sound.Replacement brass reed and mouthpipe are available and make this horn a fine example for sustainable, long lasting quality products.Tuned to F sharp'.
Compressed-air horn made from plastic.With a very loud approx. 122 dB(A) sound of 400 Hz. Comes with a compressed-aerosole bottle of 200 ml (non-flammable tetrafluoropropene HFO-1234ze, compliant to EU directive No.517 / 2014).Sufficient for approx. 200 signals of 2 seconds.200ml spare bottle replacement available.
Plastic signal horn with stainless steel membran, pressurised gas operated. Very loud penetrating sound approx. 122 dB(A), frequency 400 Hz.Supplied complete with compressed gas cylinder (750 ml capacity) in a practical storage bag. Non-flammable propellant gas tetrafluoropropene HFO-1234ze, complies with European Directive No.517 / 2014).Sufficient for approx. 750 signals of 2 seconds each.The 200ml gas cylinder (article no. 3403-100) can be used as a replacement cylinder. You will find these further down on this page under "Accessories".
Speaking trumpet mouth piece for creating an "analog" communication, as was done traditionally. Two mouth pieces can be attached to the matching tube or pipe, one on each side.Classic polished brass mouthpiece. The matching whistle is secured with a brass chain.Socket diameter = 30 mm.
Replica of the Swedish TYFON, formerly used aboard tall ships.With a beautifully made, heavy brass cylinder and funnel placed on a varnished mahogany footplate, this horn is not only a safety-related (as a reserve) gear for large ships, but also a maritime piece of art.The loud and deep signal is produced on both the in and out pump movements. Quicker pumping therefore creates a continuous tone.The brass diaphragm can be retuned.
The pump foghorn used in commercial shipping produces a deep, penetrating continuous tone.It is made entirely of brass by Den Haan Rotterdam (DHR). The pump piston has a leather membrane.The bell is firmly soldered to the pump piston.With leather carrying strap.MeasurementsTotal height: 550 mmWeight: 1.5 kgPump cylinder: 100 mm diameter, 500 mm height
Handy air horn, works WITHOUT GAS. Air pressure is generated manually, for maximum economy and sound performance. Pump housing and trumpet made of plastik.