The anchor holds the ship - your safety depends on it! Anchor gear components must be well coordinated. Toplicht has suitable anchors for every anchoring ground and every type of boat. Weight anchors, i.e. heavy ship anchors like admiralty pattern anchors (also called "Admiralty" or "Fisherman") or Hall or Union anchors are proven, classically shaped anchors for traditional ships and classic vessels. Modern lightweight constructions such as CQR anchor, WASI/Bugel anchor, Vulcan anchor, Rocna wing anchor or M-/Bruce anchor are common on many sailing and motor yachts. Folding anchors are often used as stern anchors, second anchors and spare anchors because they are easy to stow. Our wide range of products also includes grapnel folding anchors for dinghies, dismountable patent anchors for small motor launches and dinghies, as well as special anchors such as grapnel, ground anchors and rock anchors. Another recommendable piece of boat equipment is an anchor weight. When anchoring, it reduces hard jerking of the anchor chain, improves the pulling angle and reduces the swing arc. If you use an anchor weight in bad weather, you will sleep much better.
Anchors & accessories
Developed in New Zealand: the ROCNA anchor is characterized by exceptionally high holding power on all anchor grounds. This "anchor with particularly high holding power (SHHP)" is handmade from high-strength steel and hot-dip galvanized.The strong shackle with guide angle always brings the anchor into the optimum pulling position, the chisel-shaped, concave fin shape with integrated kink combines maximum strength with optimum digging-in properties, which is additionally supported by balanced weight and holding surface distribution. The anchor is very compact and can be used in most common anchor brackets and bow rollers. 1:1 pattern sheets are available at www.rocna.com. Further sizes on request.
Traditional weight anchor which nicely fits in the hawsehole.Beautiful shape, massive shaft.Made from cast steel.Up to 75kg, hot-dip galvanized; 100kg and up, only available in black.Dimensions and weight may vary based on manufacturing conditions.Other sizes available on request.
A well-known universal anchor that can be quickly cleared and when folded requires little space.Ideal for dinghies, daysailers and other light boats.These anchors have exceptionally wide flukes and a thickened shaft for better holding.An inexpensive anchor! Hot-dip galvanized.Used primarily with chain leaders.
Proven universal anchor without moving parts, approved as HHP anchor (high holding force anchor) according to GL. Welded construction made of St37 steel hot-dip galvanized. Suitable as main anchor for all anchor grounds, fast and safe tie-in of the anchor due to the roll bar.Developed by the inventor Rolf Kaczirek and optimized together with the DGzRS (a german rescue society). After patent expiration only a replica from China is available. The dimensions may vary.
Traditional anchor with solid flukes. Forged by hand and galvanized.The anchor - also called fishermens anchor - can be utilised as: anchor for dinghies, nets, buoys or decoration.
Made from hot-dip galvanized cast iron, with foldable flukes and stock.Import quality.Comes with galvanized shackle.The weight may vary by as much as 10 percent.
Small lightweight grapnel hook. Strong welded structure, made from stainless steel. With four-point shaft.
Robust welded stainless steel construction, industrial polish.The WING anchor is a combination plow and danforth anchor. It unites good setting ability with light handling.Because of its low center of gravity and self-righting design, the WING anchor sets quickly and holds well.
The WING anchor is a combination between plough- and Danforth anchor. It combines good holding with ease of use. It's low center of gravity and self-righting geometry means that the WING anchor grabs quickly and holds well. Welded, galvanized steel.
Small HERRESHOFF anchor made of forged bronze.The anchor can be taken apart in a few simple steps and is then extremely easy to stow.The flukes become wide and sharp at their ends for good holding.Comes in a handmade sailcloth bag.
The M-anchor is a replica of the well-known BRUCE anchor, combined with the advantages of plow and danforth anchors.The basic design is based on the anchors employed to secure the oil platforms in the North Sea.This anchor sets quickly and deeply and holds well, even in swells.M-anchors work well in bow rollers.Cast as a single piece, hot-dip galvanized cast steel.
The M-anchor is a replica of the well-known BRUCE anchor, combined with the advantages of plow and danforth anchors.The basic design is based on the anchors employed to secure the oil platforms in the North Sea.This anchor sets quickly and deeply and holds well, even in swells.M-anchors work well in bow rollers.Cast as a single piece, industrial polished stainless steel (AISI 316).
The hot-dip galvanized VULCAN anchor is an evolution of the ROCNA anchor.It offers the same excellent anchoring characteristics (high holding power, as well as fast and reliable digging in), but is more compact; its unique shank profile, along with the absence of a roll bar (which is unnecessary due to its design), ensure a particularly good fit in anchor mounts on the bow and swim platforms.The anchor shank is made of high-strength steel. The special “I + V” profile provides additional reinforcement to the shank of the VULCAN anchor. The anchor shank is not only “elegant,” but its “V” profile in the fluke area also accelerates the digging process. The V-profile acts like a plow and cuts into the seabed with its “sharp” edge. The VULCAN features a unique combination of anchor shank, fluke shape, and an innovative “Roll-Palm” rolling edge. The rolling edge, in conjunction with the round anchor shank, functions like a rolling bar and always positions the anchor correctly. The “V-Bulb” shifts the anchor’s center of gravity significantly downward and toward the fluke tip, aiding the embedding process. The concave shape increases the fluke surface area—similar to the ROCNA anchor—which is partly responsible for its very high holding power. There are attachment eyes for safety and recovery lines, as well as for a tandem anchor.CAUTION: An anchor swivel must never be attached directly to the VULCAN’s anchor shank—otherwise, the anchor will not rotate properly and will not dig in correctly. A few chain links should be placed between the swivel and the anchor shank; these links should be attached to the shank with a shackle (see page 26 in the “User Manual” under “Downloads”).
A classic and also handy sized patent anchor for open motor launches and dinghies made from malleable iron.The anchor can easily be split into two parts by sliding out the shaft and fits into any locker seat.Alternatively it can be carried in the hawse pipe.
An inexpensive replica of the well-known BRITANY anchors.Unites all of the benefits of danforth anchors in its complex construction:Best holding on all bottoms for its light weight.Welded construction, hot-dip galvanized.
Preiswerter Leichtgewichtsanker mit guter Haltekraft.Der breite Stock mit Endkugeln verhindert das Verkanten und sorgt für sicheres Eingraben der Flunken.Feuerverzinkte Schweißkonstruktion.
The ULTRA anchor, made of 316L and 318LN stainless steel, is characterized by its high holding power on all types of anchoring surfaces.Patented design features include the curved, lead-filled tip, which ensures rapid penetration into the seabed. The hollow shank provides optimized weight distribution, while the concave underside ensures high holding power. The lateral wing plates prevent the anchor from being torn loose, even under changing wind or current conditions. The flat turning surface on the underside facilitates retrieving the anchor. Overall, the design allows for controlled retrieval of the anchor using various bow roller systems.ULTRA anchors are developed and manufactured in Turkey. Each anchor is handcrafted and hand-polished. The hand-polishing provides years of protection against corrosion and prevents silt or sand from adhering to the anchor.The ABS-type-approved ULTRA anchor (see “Downloads”) is classified as an SHHP (Super High Holding Power) anchor.Features Available in anchor weights from 5 to 360 kgSuitable for numerous types of boats and yachts as well as various bow roller systemsGrips upon first lowering and holds immediately, without scraping against the seabedDigges in deeper as wind load increases, thereby developing additional holding powerRemains securely anchored even with changing wind directionsAligns itself automatically when hauled in and fits neatly into the bow roller of a wide variety of bow roller systems
The father of all anchors.All-round anchor with fixed flukes and collapsible pole.Neatly welded design, hot-dip galvanised.Dimensions, weight and colour may vary depending on the manufacturer and production process.The 100 kg anchor is painted black.
The trusted C-Q-R anchor has been completely reworked and optimised by LEWMAR.With reinforced stock and a stronger hinge the anchor now is weight optimised with a larger sized fluke made as a pure welded construction from steel (material number 1.0143).The new C-Q-R anchor NEW STYLE is certified by Lloyds as an anchor with high holding power (HHP) also.The very good corrosion protection is achieved through the use of a sound hot galvanisation.The anchor has a shackle with large eye for a tripping line (weighting line) welded-on.
Galvanized flat iron construction with fixed attachment ring. Available in a straight or pronged design.
Stainless-steel, heavy-duty design. 14 mm solid stainless steel.The strong handle also works as a cleat.
Asymmetrical ring made of polished stainless steel, for safe mooring.The ULTRA MARINE increases the overall weight of the anchor system and changes the angle of pull of the chain, making it less likely that the anchor will break out of the anchor shank. The shape makes the ring easy to thread onto the chain.For recovery, the ring can be deflected down to the anchor shank so that the anchor can be broken out directly over the shank.
