Electric fuel pump that can be used to bring fuel to a stove if the primary tank is below the level of the fuel regulator and the installation of a day tank is not possible.This membrane pressure pump with electrically regulated electromagnetic works is maintenance-free and nearly wear-free.Data:- Dimensions: 73 x 128 mm,- Output: 120 l/h,- Pressure lift: 0.25 bar (max. 2,5 m),- Suction lift: -0.10 bar (max. 1,0 m),- Attachement fittings for hose 8 mm on both sides.
Cleanly welded tanks of stainless steel plate.Complete with filler pipes, shut-off valves (1/4" threads) for 8 mm copper line with mounting tabs.Comes with separator pipe as level indicator.We can also finish tanks to your specifications. Please ask!
For oil-heating systems: a temperature sensor measures the water temperature and stops the fuel supply to the stove if the set temperature is exceeded.In order to mount the sensor on the heating system, REFLEKS offers a T-pipe from copper (please order separately) with two tube fittings with outer thread of G "1/2" (article 4292-100) .Comes with attachment material for 8 mm pipe (two connectors included).
Made from seawater-proof bronze (Rg 7). Essential for the control of, for example, fuel or tank connections.Red-painted aluminum handle.A switch cable can be attached at the handle bore hole - with firmly ancored valve - in order to open or shut the flow rate.The angle of the lever is approx. 30°.
Cleanly welded tanks of stainless steel plate.Complete with filler pipes, shut-off valves (1/4" threads) for 8 mm copper line with mounting tabs.Comes without separator pipe for level indicator.We can also finish tanks to your specifications. Please ask!
For the hot-water circuit. Made of cleanly welded stainless steel plate.With fill closure, 1/2" bottom pipe fitting and 8 mm fuel pipe connection for the overflow line.
For diesel and heating oil. Brass housing, clear plastic filter, washable filter insert of nickel mesh 100-150 µm.Complete with holding bracket of galvanized steel and brass fuel pipe connection for 8 mm copper pipe.Comes without shut-off valve.
OVENTROP brass OILPUR heating oil filters for stoves and heaters, which are operated in a sucking mode single line system. Nominal size DN10 (G 3/8"), with a clear plastic filter and a washable filter insert of nickel mesh 100-150 µm.Complete with holding bracket of galvanized steel and brass fuel pipe connection for 8 mm copper pipe.In the return pipe version the filter has two connectors with a male thread G 3/8" with internal cone fitting to the burner tubing and a hand venting valve in order to start the burner.
TOC-DUO-3 is a combination of filter and bleeder with return pipe system for diesel and heating oil. Aluminium housing, clear plastic filter, washable filter insert of sintered plastic mesh 50-75 µm.Complete with holding bracket of galvanized steel.In/out ports: tank side nozzle with internal thread G 3/8", external thread G 3/8" with an inner cone for the tube to the burner.This filter serves to continually filter and automatically bleed the fuel for oil-fired heating systems.Accessories: adapter for revolver cartridge, spare filter cartridge PN10.
7 litre petroleum pressure tank from TAYLOR's, e.g. for the 079K petroleum heater, the 028 petroleum cooker or the 029 petroleum cooker with grill.The tank is made of stainless steel and fitted with a bicycle valve (Dunlop or lorry valve). It has a level indicator and a pressure gauge.The pressurised tank can be mounted in any position and is connected to the heater or cooker with a copper pipe.Dimensions: 180 x 340 x 290 mm (D x L x H).