Fuel pipe connectors

Sonstige Hersteller

Art. No.	model	version	size	Price (unit)	Delivery time	Note list	Buy

Description

Brass compression fitting for 8mm tube.

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

Pipe clip stainless steel

Pipe clip niro, suitable for copper fuel pipes.

€1.80 *

Details

More Products from Category Tanks, pumps & pipes

Adapter for fuel filter OVENTROP

Accessories for fuel filter OVENTROP.

€34.90 *

Details

Copper fuel pipe / gas pipe

Relaxed, bendable copper pipe for simple installation.Outer diameter 8 mm.

€13.95 *

Details

Electric fuel pump HÜCO

Electric fuel pump that can be used to bring fuel to a stove if the primary tank is below the level of the fuel regulator and the installation of a day tank is not possible.This membrane pressure pump with electrically regulated electromagnetic works is maintenance-free and nearly wear-free.Data:- Dimensions: 73 x 128 mm,- Output: 120 l/h,- Pressure lift: 0.25 bar (max. 2,5 m),- Suction lift: -0.10 bar (max. 1,0 m),- Attachement fittings for hose 8 mm on both sides.

From €121.00 *

Details

Expansion tank REFLEKS

For the hot-water circuit. Made of cleanly welded stainless steel plate.With fill closure, 1/2" bottom pipe fitting and 8 mm fuel pipe connection for the overflow line.

From €233.00 *

Details

Filtercartridge

Filtercartridge for fuel filter OVENTROP.

From €10.50 *

Details

Filtercartridge OVENTROP

Spare filter for OVENTROP oil filters.Type PN10.25my.

€28.50 *

Details

Fuel filter OILPUR

For diesel and heating oil. Brass housing, clear plastic filter, washable filter insert of nickel mesh 100-150 µm.Complete with holding bracket of galvanized steel and brass fuel pipe connection for 8 mm copper pipe.Comes without shut-off valve.

€45.01 *

Details

Fuel filter TOC-DUO-N

TOC-DUO-3 is a combination of filter and bleeder with return pipe system for diesel and heating oil. Aluminium housing, clear plastic filter, washable filter insert of sintered plastic mesh 50-75 µm.Complete with holding bracket of galvanized steel.In/out ports: tank side nozzle with internal thread G 3/8", external thread G 3/8" with an inner cone for the tube to the burner.This filter serves to continually filter and automatically bleed the fuel for oil-fired heating systems.Accessories: adapter for revolver cartridge, spare filter cartridge PN10.

€195.01 *

Details

Fuel pipe connection

Fuel pipe connection for 8 mm pipe diameter.Melting cap for automatic closing during a fire.

€62.90 *

Details

Fuel pipe connection for TOBY controller

Fuel pipe connection for 8 mm pipe diameter.Melting cap for TOBY oil metering valves for automatic closing in the event of a fire.

€62.90 *

Details

Fuel pipe connectors

Brass compression fitting for 8mm tube.

From €1.20 *

Details

Fuel tank stainless steel

Cleanly welded tanks of stainless steel plate.Complete with filler pipes, shut-off valves (1/4" threads) for 8 mm copper line with mounting tabs.Comes without separator pipe for level indicator.We can also finish tanks to your specifications. Please ask!

From €369.00 *

Details

Fuel tank stainless steel with level indicator

Cleanly welded tanks of stainless steel plate.Complete with filler pipes, shut-off valves (1/4" threads) for 8 mm copper line with mounting tabs.Comes with separator pipe as level indicator.We can also finish tanks to your specifications. Please ask!

From €405.00 *

Details

OILPUR Fuel filter OVENTROP with valve

OVENTROP brass OILPUR heating oil filters for stoves and heaters, which are operated in a sucking mode single line system. Nominal size DN10 (G 3/8"), with a clear plastic filter and a washable filter insert of nickel mesh 100-150 µm.Complete with holding bracket of galvanized steel and brass fuel pipe connection for 8 mm copper pipe.In the return pipe version the filter has two connectors with a male thread G 3/8" with internal cone fitting to the burner tubing and a hand venting valve in order to start the burner.

From €55.00 *

Details

Pipe clip nylon

Pipe clip nylon, suitable for copper fuel pipes.

€0.55 *

Details

Pipe clip stainless steel

Pipe clip niro, suitable for copper fuel pipes.

€1.80 *

Details

Pressure tank

Expansion tank for heat and pressure-water installations.Tank with integrated membrane for constant pressure (max. 8 bar).

€72.49 *

Details

Shut-off valve GUIDI

Made from seawater-proof bronze (Rg 7). Essential for the control of, for example, fuel or tank connections.Red-painted aluminum handle.A switch cable can be attached at the handle bore hole - with firmly ancored valve - in order to open or shut the flow rate.The angle of the lever is approx. 30°.

From €45.51 *

Details

TAYLOR'S 7 litre paraffin tank with pressure gauge + valve

7 litre petroleum pressure tank from TAYLOR's, e.g. for the 079K petroleum heater, the 028 petroleum cooker or the 029 petroleum cooker with grill.The tank is made of stainless steel and fitted with a bicycle valve (Dunlop or lorry valve). It has a level indicator and a pressure gauge.The pressurised tank can be mounted in any position and is connected to the heater or cooker with a copper pipe.Dimensions: 180 x 340 x 290 mm (D x L x H).

€565.00 *

Details

Temperature safety valve

All REFLEKS heating systems with a water circuit should be equipped with this shut-off valve.The KBB fire protection valve is a compact valve in a corrosion-resistant, non-flammable design that operates purely mechanically and does not require a power supply.The temperature sensor is connected to the valve via a permanently soldered capillary line.As soon as the temperature at the sensor exceeds the set value (90°), the oil supply to the stove is immediately interrupted by the valve.The valve remains closed until the reset button is pressed.The valve can also be triggered manually by pulling the reset button.The valve (supplied with connection material for 8 mm pipes, SR 8 mm cutting ring fitting on both sides) is installed in the oil supply line directly upstream of the regulator.The temperature sensor measures the flow hot water temperature near the heater. If the set temperature (90°C) is exceeded, the oil supply is shut off immediately.To connect the sensor to the heating pipework, use a copper T-piece with two G ½" male threaded pipe fittings (please order item no. 4292-100 separately). The vertical branch of the T-piece does not have direct access to the water circuit of the heating system, but is soldered onto the water-carrying pipe and serves to accommodate the temperature sensor.Care must be taken during installation to ensure that the capillary line is not kinked under any circumstances. Length of the sensor line 200 cm.

From €99.81 *

Details

Tool for fuel filter

Tool for loosening the union screw connection of fuel filters or for loosening filtercartridge.

From €14.90 *

Details

Fuel pipe connectors

Fuel pipe connectors

Description

More Products from Category Tanks, pumps & pipes

Last seen products

Customer Reviews