Small HERRESHOFF anchor made of forged bronze.The anchor can be taken apart in a few simple steps and is then extremely easy to stow.The flukes become wide and sharp at their ends for good holding.Comes in a handmade sailcloth bag.
The M-anchor is a replica of the well-known BRUCE anchor, combined with the advantages of plow and danforth anchors.The basic design is based on the anchors employed to secure the oil platforms in the North Sea.This anchor sets quickly and deeply and holds well, even in swells.M-anchors work well in bow rollers.Cast as a single piece, hot-dip galvanized cast steel.
The M-anchor is a replica of the well-known BRUCE anchor, combined with the advantages of plow and danforth anchors.The basic design is based on the anchors employed to secure the oil platforms in the North Sea.This anchor sets quickly and deeply and holds well, even in swells.M-anchors work well in bow rollers.Cast as a single piece, industrial polished stainless steel (AISI 316).
Traditional weight anchor which nicely fits in the hawsehole.Beautiful shape, massive shaft.Made from cast steel.Up to 75kg, hot-dip galvanized; 100kg and up, only available in black.Dimensions and weight may vary based on manufacturing conditions.Other sizes available on request.
Made from hot-dip galvanized cast iron, with foldable flukes and stock.Import quality.Comes with galvanized shackle.The weight may vary by as much as 10 percent.
A well-known universal anchor that can be quickly cleared and when folded requires little space.Ideal for dinghies, daysailers and other light boats.These anchors have exceptionally wide flukes and a thickened shaft for better holding.An inexpensive anchor! Hot-dip galvanized.Used primarily with chain leaders.
An invention from New Zealand: The ROCNA anchor stands out for its exceptional holding strength in all bottom types. This "super high holding power" (SHHP) anchor is hand-made from high-strength steel and hot-dip galvanized. The strong bail brings the anchor to the optimal angle for setting every time, the chisel-shaped concave blade with integrated kink combines high holding power with optimal grabbing charateristics that are supported by exceptional weight and holding-surface distribution. The anchor is compact and fits in most common anchor lockers and bow rollers. Other sizes on request.
The WING anchor is a combination between plough- and Danforth anchor. It combines good holding with ease of use. It's low center of gravity and self-righting geometry means that the WING anchor grabs quickly and holds well. Welded, galvanized steel.
Robust welded stainless steel construction, industrial polish.The WING anchor is a combination plow and danforth anchor. It unites good setting ability with light handling.Because of its low center of gravity and self-righting design, the WING anchor sets quickly and holds well.
The galvanized VULCAN anchor is an evolution of the ROCNA anchor.It has the same quality characteristics (high holding power as well as fast and reliable digging in), but it is more compact and the special profile of the anchor shaft, as well as the omission of a roll-bar (since not necessary with this construction), make an advantageous design for anchor holders on the stem head or the bathing platform. In addition to the use of high tensile steel, shank strength is optimised by a unique "I + V profile" shank design, granting improved resistance to bending courtesy of a computer optimised I-beam geometry. This visually elegant innovation also improves setting performance, with the lower "V" edge cutting into the seabed and minimizing resistance to a deep and secure digging in. Breaking from the ROCNA design, the VULCAN features an unique combination of shank and fluke geometry - including an innovative "roll-palm" which self-rights the anchor on the seabed without the use of a roll-bar. This is assisted by the "V-bulb" which extends fluke ballast downward to gain maximum leverage and efficiency. The concave fluke is similar in design to the ROCNA anchor, directly equating to more holding power and security. There are fixing eyes for safety and rescue lines, as well as for a tandem anchor.
A classic and also handy sized patent anchor for open motor launches and dinghies made from malleable iron.The anchor can easily be split into two parts by sliding out the shaft and fits into any locker seat.Alternatively it can be carried in the hawse pipe.
Proven universal anchor without moving parts, approved as HHP anchor (high holding force anchor) according to GL. Welded construction made of St37 steel hot-dip galvanized. Suitable as main anchor for all anchor grounds, fast and safe tie-in of the anchor due to the roll bar.Developed by the inventor Rolf Kaczirek and optimized together with the DGzRS (a german rescue society). After patent expiration only a replica from China is available. The dimensions may vary.
An inexpensive replica of the well-known BRITANY anchors.Unites all of the benefits of danforth anchors in its complex construction:Best holding on all bottoms for its light weight.Welded construction, hot-dip galvanized.
Preiswerter Leichtgewichtsanker mit guter Haltekraft.Der breite Stock mit Endkugeln verhindert das Verkanten und sorgt für sicheres Eingraben der Flunken.Feuerverzinkte Schweißkonstruktion.