Spareparts for the marine toilett Raske & van der Meyde RM69 STANDARD. The service kit 530 includes: Nr. 516 Inlet valve, Nr. 517 Outlet valve, Nr. 518 Check valve, Nr. 525 Bumper washer, Nr. 527 shaft seal, Nr. 529 Piston ring, Nr. 535 O-ring for lever.
Proven bilge pump with robust housing of white plastic for mounting behind the bulkhead or below the deck with through reaching pump handle (bulkhead pump, below deck pump), especially suited for the installation in the sanitary areas. The efficient membrane pump is easy to maintain without tools through the large screw-off inspection port. Self priming up to 4,5m, maximum delivery height: 4,5m. For hose fittings of 38mm. Very well suited as a head pump, for example, for LAVAC POPULAR or ZENITH toilets (vacuum pumps). Type HENDERSON MK5 U/D, white.
Accessory for LAVAC POPULAR onboard toilets: Available spare part sets:* Seat and cover of white plastic, complete with seals, * Seat or cover alone, * Seals for seat or cover,* Plastic hinge sets (please ask for the matching model),* Complete seal set,* Seat and cover complete with seal and hinge set. A detailed view of the table can be found under "Downloads & Information".
Consumable material for the TROBOLO compost separation toilet.The litter consists of sawdust (80% pine, 20% alder), which is produced in the TROBOLO factory. The litter binds moisture and residual odours in the solid waste container and provides a natural wood scent. No (electrical) exhaust air system is required when using bedding.The 25 litres of litter (sufficient for 85-115 uses) are supplied in an ecological kraft paper bag.The 25 litre litter is also available in combination with ten compostable inlays.The inlays (bin liners) effectively protect the 6.5 litre solid waste container from soiling and significantly simplify disposal. They are available in two versions:The black inlays are made from recycled polypropylene. They are tear-proof, resistant to liquids and also suitable for long emptying intervals. Solid waste (such as nappies) can be disposed of in them with the residual waste. The roll of 20 inlays can be stored in the inlay and toilet paper dispenser of the TROBOLO WandaGo compost separation toilet so that they are always to hand.The beige inlays are made from corn starch. They are completely compostable. A maximum emptying interval of one week is recommended. The solid waste can be disposed of with the bag in the organic waste bin, a composter or on a compost heap. The roll of 10 inlays can be stored in the inlay and toilet paper dispenser of the TROBOLO WandaGo compost separation toilet so that it is always to hand.
WC seat and cover 29097-1000 for the small bowl (Kompakt) from JABSCO.This toilet seat fits both manual toilets JABSCO KOMPAKT (29090), and electric toilet JABSCO QUIET FLUSH KOMPAKT (37425).
The spare hand pump TWIST'N'LOCK for the JABSCO toilets COMPACT and COMFORT with their safety system suppress the siphoning effect through a simple 90° turn of the handle.
WC seat and cover 29097-1000 for the bigger bowl (komfort) from JABSCO.This toilet seat fits both manual toilets JABSCO KOMFORT (29120), and electric toilet JABSCO QUIET FLUSH KOMFORT (37245).
JABSCO pump toilets can be converted to electric operation in just a few simple steps using this conversion kit. This is the easiest way to quickly electrify a manual toilet. Another practical advantage is that in the event of a prolonged failure of the electrical system, it can be quickly dismantled if the replaced manual pump is kept in reserve on board.The electrical unit fits JABSCO and PAR models manufactured after 1987.Height x width x depth: 270 mm x 87 mm x 150 mm Weight : 3.3 kg 12 Volt / 25AIf high comfort and low-noise operation are required, we recommend the modern JABSCO Quiet Flush E2 toilets from our range.
Service kit for JABSCO QUIET FLUSH marine toilets COMPACT and COMFORT. The Service kit includes: - 1 x Bowl O-Ring Seal, - 1 x Joker - Valve, - 1 x O-ring, - 1 x Seal, - 2 x Washer.
Proven bilge pump with robust housing of white plastic for mounting on the bulkhead (bulkhead pump), especially suited for the installation in the sanitary areas. The efficient membrane pump is easy to maintain without tools through the large screw-off inspection port. Self priming up to 4,5m, maximum delivery height: 4,5m. For hose fittings of 38mm. Very well suited as a head pump, for example, for LAVAC POPULAR or ZENITH toilets (vacuum pumps). Type HENDERSON MK5 T/A, white.
Robust diaphragm pump for extracting sewage from the pump specialist JABSCO. Dry self-priming up to 3.0 m. Full passage due to the use of lip valves. Universal and flexible installation, as both the pump head and the hose direction can be adjusted as required.Dimensions L x W x H: 278 x 161 x 132 mm. Available for 12 V or 24 V.
Jabsco 58541-1000 Pulley and Belt Kit.New version: Pulleys made of aluminum. Compatible with the Jabsco toilet series 58500.Contains Small and Large Pulley, Belt and Clip.
