Go to homepage
€0.00*
Jobs
Catalogue
Quick order
Filter products now
from 13 € to 819 €
Filter products now

Antifouling

25 products
HEMPEL CLASSIC Antifouling
HEMPEL CLASSIC Antifouling
Robust and reliable, self polishing antifouling with copper compounds as active agent. Sanding is not necessary before subsequent coatings. Applicable for all boat building materials except aluminium.Ecological protection for the whole season in salt water, brackish water and fresh water sailing areas in moderate temperatures.Yield: ca.11 m²/lThis product is approved for the use in the Netherlands (approval no. 15010). Use biocidal products safely! Please refer to the Technical Product Data Sheet under "Downloads & Information" for the correct application of the product.

From €59.90 *
Details
LEFANT T-COAT 2K Bottom Coating
LEFANT T-COAT 2K Bottom Coating
This light and biocide-free underwater coating is similar to a hard antifouling while being eco-friendly and easy to clean. The epoxy-resin-based coating produces a smooth, dense surface that protects the hull against moisture and corrosion as well as from bio fouling such as algae. LeFant T-Coat is free of silicones and metals and suitable for the use in open and closed waters (e.g. lakes, rivers). If fouling becomes attached to the surface, it can be easily removed mechanically with cleaning sponges, brushes or hull cleaning systems.Suitable GRP/plastic, steel, aluminum. Please note that existing antifouling and one-component underwater primers must be completely removed prior to application of T-Coat. Existing epoxy coating systems in good condition may be retained. For better adhesion and sealing of porous, sandblasted or rough surfaces, as well as when recoating, it is recommended to prime with an epoxy resin based primer like the LEFANT Epoxy Primer, (first coat thinned with 20-30% LEFANT Multi Thinner).To achieve a smooth "racing" surface, the paint can be wet sanded over with a fine grit after curing.Working temperature: minimum 7 °C, an ideal working temperature at 15-25 °C.Color mixing: Mix the primer with the desired color additive, add hardener and stir thoroughly. One paint pot contains 55 ml of paint and is sufficient for a 750 ml can of coating.Coverage: 4-6m²Application: Apply with brush or roller, one 750 ml container is sufficient for about 6m². 2-3 coats (approx. 100 microns/coat) are recommended for a new structure, 3-4 coats for the color white. For the safe and correct application of Lefant T-Coat, please read the product data sheet. You will find it below under "Downloads & Information".

From €72.80 *
Details
LEFANT T-COAT 2K Bottom Coating
LEFANT T-COAT 2K Bottom Coating
EPIFANES COPPER CRUISE Antifouling
EPIFANES COPPER CRUISE Antifouling
Highly efficient, hard antifouling that incorporates copper and biocides with a selfpolishing effect and exceptional long-term fouling protection in saltwater, fresh water and brackish water. It is aprroved for the use in the Netherlands (approval no. 14301).The innovative 'Copper Release Technology' combines the advantages of hard and selfpolishing antifoulings.With highly improved encrustation protection, compared to conventional copper carrying antifoulings, here the active agents are optimised and released in considerable smaller amounts, which is favourable for the environment.Can be used with most other commercially available underwater primers without any problems as well as on most hard and selfpolishing antifoulings. Suitable for all sailing and motor vessels with a maximum speed of 30 knots, as well as all hull materials except aluminium.Not suitable for boats moored permanently, vessels which are not moved for the whole season.Yield: approx. 10 m²/l The colours on the colours chart may change slightly depending on your printer or computer screen settings. Use biocide products safely. Always read the label and product information before use. BAuA-Nr. N-74891

From €62.90 *
Details
EPIFANES COPPER CRUISE Antifouling
EPIFANES COPPER CRUISE Antifouling
EPIFANES COPPER CRUISE Antifouling
SEAJET EMPEROR A 034 Antifouling for Aluminium Vessels
SEAJET EMPEROR A 034 Antifouling for Aluminium Vessels
Emperor 034 A is an extremely effective self-polishing antifouling with a new advanced resin technology and biocides that ensure effective protection against fouling.This makes this antifouling suitable for areas worldwide with high fouling pressure. Suitable for all boat building materials, including aluminum. Three coats will last for the duration of 2 seasons. Vivid, luminous colors.Yield: approx. 10 m²/l.Use biocidal products safely! Please refer to the Technical Product Data Sheet under "Downloads & Information" for the correct application of the product.

From €59.90 *
Details
SEAJET EMPEROR A 034 Antifouling for Aluminium Vessels
SEAJET EMPEROR A 034 Antifouling for Aluminium Vessels
HEMPEL HARD RACING TecCel Hard Antifouling
HEMPEL HARD RACING TecCel Hard Antifouling
Highly effective premium hard antifouling with copper compounds as the active ingredient, which offers optimum fouling protection due to the hard binder, especially on fast motorboats, trailer boats and boats that fall dry in the mudflats.Suitable for all waters. Modified with TecCel non-stick technology (PTFE), it is smoother and has less friction than conventional hard antifoulings. Can be applied to all hull materials except aluminum (exception: white). Detailed application information can be found under "Downloads & Information".Coverage: approx. 13 m²/l Thinner: HEMPEL Thinner No. 808 (max. 5%)

From €38.90 *
Details
HEMPEL HARD RACING TecCel Hard Antifouling
HEMPEL HARD RACING TecCel Hard Antifouling
SEA-LINE Thin film antifouling SILVER RACING
SEA-LINE Thin film antifouling SILVER RACING
Very smooth and extremely fast drying thinfilm-antifouling with PTFE non-stick technology and copper oxyds as biocide agent. For medium fouling conditions in salt water, brackish water and fresh water and lakes. Not applicable for aluminium boats. Can be applied to all under-water Epoxy primers and is compatible with PTFE antifouling like VC 17m andHempel Waterglide.Not compatible to classic hard antifouling with PTFE. Please check the compatibility chart.Yield: 11-12 m²/l. Use biocide products safely. Always read the label and product information before use. BAuA-Nr. N-74280

From €44.90 *
Details
SIGMA ECOFLEET 290S antifouling
SIGMA ECOFLEET 290S antifouling
Tin-free, self-polishing longtime antifouling from the shipping industry.Fouling protection for up to 36 months in all waters.The base consists of bioactive, organic materials and copper compounds.Can cover most hard and ablative antifoulings.Must not be applied over old antifoulings containing teflon or tin..As a base or bonding agent, SIGMA VIKOTE CR-Primer is recommended.Yield: approx. 7 m.sq./l.Colour: red brown.Thinner: 21-06 (article-no 2580-101).Use biocidal products with care! Please read the information on the lable and the instruction leaflet before use. BAuA-Nr. N-52694

From €147.00 *
Details
SIGMA ECOFLEET 290S antifouling
SIGMA ECOFLEET 290S antifouling
SIGMA ECOFLEET 290S antifouling
HEMPEL MILLE NCT Self Polishing Antifouling
HEMPEL MILLE NCT Self Polishing Antifouling
Selfpolishing premium antifouling with highly effective antifouling protection per copper bonding and organic agents.By the use of the NCT technology (NewCopperTechnology) it succeeds to make use of the copper bonding even more continuously and controlled for more economic and effective usage.The selfpolishing effect of the antifouling provides for an always smooth, bioactive and low friction surface, which doesn't need to be sanded for the succeeding coat.Applicable to all surfaces and boat materials (with the exception of aluminium) as well as for the employment in all waters.Thinner: 808.Yield: approx. 13 m²/l. Use biocide products safely. Always read the label and product information before use.

From €38.90 *
Details
HEMPEL MILLE NCT Self Polishing Antifouling
HEMPEL MILLE NCT Self Polishing Antifouling
HEMPEL ECOPOWER Racing biocide free
HEMPEL ECOPOWER Racing biocide free
Biocide free hard antifouling with Teccel anti adhesion technology (PTFe) for specially even and low-friction surfaces.Recomended for all waters with little fouling growth (fresh water bodies) and for all waters with high environmental regulations. Suitable for all boat building materials. Thinner: 808.Yield: approx. 12,3 m²/l. For more than 100 years HEMPEL produces ship paints and today is one of the worldwide leading producers in this field. HEMPEL is especially known for its great varnishes and the perfected premium antifoulings among their yacht paints. As well as the products for the mega yachts and the commercial shipping, that will be applied by the professional user, which we can offer on demand.

From €33.90 *
Details
HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPASPEED TF is a biocide-free antifouling. It forms such a smooth surface that fouling is minimized and friction is reduced. The new hydrogel technology in the HEMPASPEED TF is a combination of thin layer and hard antifouling. That means it is as robust as a hard antifouling, but with an ultra-smooth surface. It protects against fouling and is easy to clean without chemicals. Suitable for fresh, salt and brackish water as well as for inland areas. Particularly recommended in areas where biocides may not be used or only to a limited extent (also in the Netherlands). Suitable for all sports boats with GRP, steel or aluminum hulls, also for regatta and trailer boats. Application on existing antifouling layerIt is possible to switch from a conventional antifouling to HEMPASPEED TF. The old coating (if it is still intact) does not have to be removed. A layer of HEMPEL CONVERSION Primer is then required as an intermediate layer. Two coats of HEMPASPEED TF should be applied over the primer. Application as a new coating When recoating, the substrate must first be sealed with HEMPEL LIGHT Primer before applying HEMPEL CONVERSION Primer and two coats of HEMPASPEED TF. Note the instructions on the product data sheet. A maximum of 3 months should elapse between application and putting the product in the water, ideally 30 hours at around 15°Application with brush or roller Dilute with Thinner 808 (No 3) (Art. No. 2577-020) Available in four shades: True Blue (blue), Ultimate White (white), Black (black) and Penta Gray (grey). Yield: approx. 11 m²/l.

From €42.90 *
Details
HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPEL ECOPOWER PROP Propeller-Spray
HEMPEL ECOPOWER PROP Propeller-Spray
Biocide-free spray paint, suitable for propellers, Z-drives and stern drives. Protects against fouling and facilitates cleaning. Advanced binder technology controls the self-renewing effect throughout the season.For application on uncoated surfaces it is recommended to prime with HEMPELS Light Primer and adhesion primer HEMPELS Underwater Primer. In case of existing, old or traditional antifouling, remove loose material and fouling beforehand, on surfaces with existing, old hard matrix or unknown antifouling, the surface should be additionally wet sanded (grit 180). Clean and dry the surface afterwards. If the condition of the previous antifouling layer is poor, seal with a layer of primer (e.g. HEMPELS Underwater Primer). For detailed application instructions, please refer to the Technical Product Data Sheet under "Information and Downloads". Suitable thinner: 808 (No.3)Theoretical spreading rate: 11 m2m2/Litre

Content: 0.5 Liter (€0.00* / 1 Liter)

From €28.90 *
Details
LeFANT NAUTICA HARD ECO biocide free antifouling
LeFANT NAUTICA HARD ECO biocide free antifouling
NAUTICA HARD ECO is a biocide-free underwater coating from the Swedish company LEFANT, suitable for sail and power boats in all speed ranges.The hard matrix in the coating provides a smooth, low-friction surface which protects the boat from fouling and is easy to clean. A clean underwater hull increases speed and helps reduce fuel consumption.NAUTICA HARD ECO is suitable for use on aluminium hulls and is compatible with most self-polishing and hard antifouling. Can be painted directly onto LEFANT TF and LEFANT MARK 5. Two coats last for seasonal protection, extra coats in areas where friction and wear are higher, such as rudder, stern and waterline might be neccessary.Coverage: 13 m²/litreFor the application of Lefant Nautica Hard ECO, please see the detailed instructions on the technical data sheet under "Downloads & Information".

From €59.00 *
Details
EPIFANES FOUL AWAY Biocide Free
EPIFANES FOUL AWAY Biocide Free
A self-polishing underwater paint, free of copper, tin and organic biocides.Suitable for freshwater- brackish water and intermittent saltwater areas.Suitable for all boat building materials. Adheres to all hard antifoulings and self-polishing antifoulings.Three coats are recommended as initial application.Yield: approx. 10 m²/l. Thinner: EPIFANES D-100 ThinnerThe colors on the color sample card may differ from the original colors due to monitor or printer settings and are only intended as a guide.Use biocidal products with care. Always read the label and product information before use.

From €68.90 *
Details
EPIFANES FOUL AWAY Biocide Free
EPIFANES FOUL AWAY Biocide Free
EPIFANES FOUL AWAY Biocide Free
YACHTCARE hard antifouling ACTION
YACHTCARE hard antifouling ACTION
Economical and effective hard antifouling with copper bonding as active component and an indissoluble binder.As such it offers excellent antifouling protection especially for speed boats, trailer boats and boats that fall dry in tidal waters.Developed for the north European coastal and inland waters.Apart from aluminium it can be applied on all surfaces and boat materials.Yield: 13m²/l. Use biocide products safely. Always read the label and product information before use.

From €35.90 *
Details
YACHTCARE hard antifouling ACTION
YACHTCARE hard antifouling ACTION
YACHTCARE hard antifouling ACTION
HEMPEL ECOPOWER Cruise biocide free
HEMPEL ECOPOWER Cruise biocide free
Biozidfreies, selbstpolierendes Antifouling, dessen Oberfläche sich durch Reibung im Wasser immer wieder selbst reinigt.Saisonbedingter Bewuchs lässt sich mit Bürsten oder Hochdruckreinigen problemlos entfernen.Schleifen der gereinigten Oberfläche vor dem Folgeanstrich ist nicht notwendig.Empfohlen für alle Gewässer mit geringem Bewuchsdruck (Süßwasser) und hohen Umweltanforderungen. Geeignet für alle Bootsbaumaterialien. Thinner: 808.Yield: approx. 14,3 m²/l. Antifouling tip When completely renewing the underwater coat it makes sense - after first sealing with an Epoxy primer (i.e. Light Primer) - to firstly apply a coat of hard antifouling before two coats of selfpolishing antifouling in another colour. This can save time and money, because only when the colour of the first coat of paint becomes visible, will it become necessary to apply new coats of selfpolishing antifouling. For more than 100 years HEMPEL produces ship paints and today is one of the worldwide leading producers in this field. HEMPEL is especially known for its great varnishes and the perfected premium antifoulings among their yacht paints. As well as the products for the mega yachts and the commercial shipping, that will be applied by the professional user, which we can offer on demand.

From €34.95 *
Details
YACHTCARE SP Self Polishing Antifouling
YACHTCARE SP Self Polishing Antifouling
A self-polishing antifouling with copper bindings and bioactive, organic active ingredients. Intended for use in fresh, salt and brackish water. Through the self-renewing effect the paint retains a bioactive surface throughout its entire life.YACHTCARE self polishing antifouling is compatible with most other antifouling systems.It is applicable on wood, GRP and steel. Not applicable for aluminum bases. Thinner: YACHTCARE ANTIFOULING THINNERRequirement: 12.5 m.sq./l Use biocide products safely. Always read the label and product information before use. BAuA-Nr. N-74363

From €33.50 *
Details
SEAJET 037 COASTAL Antifouling
SEAJET 037 COASTAL Antifouling
SEAJET 037 COASTAL is a tin-free hard antifouling system for salt and fresh water.Intended for all boatbuilding materials, except aluminum. Also intended for locations that dry out.When used as a primer, 2 - 3 coats are recommended.Coverage: approx 10 m.sq./l. Use biocide products safely. Always read the label and product information before use. BAuA-Nr. N-13052

From €35.90 *
Details