Go to homepage
€0.00*
Jobs
Catalogue
Quick order

HEMPEL'S Ecopower Racing is a biocide-free, hard underwater hull paint with Teccel anti-adhesion technology (PTFe) for a particularly smooth and low-friction surface.
Recommended for all waters with light fouling pressure and for all waters with high environmental requirements. Suitable for all boat building materials.

Note: The effectiveness of biocide-free underwater coatings depends on the area of operation and the boat's sailing characteristics. Regular inspection of the hull during the season is recommended. Any fouling that occurs can be minimized by gentle cleaning with a sponge or soft brush.


Technical data

  • Area of use: For waters with light fouling pressure
  • Boat type: For fast sailing and motorboats
  • Substrate (with suitable primer): GRP, wood, plywood, aluminium, steel; existing hard antifoulings in good condition 
  • Primer: HEMPEL Light Primer, HEMPEL Underwater Primer
  • Coverage: 12 m²/l
  • Thinner: Hempel's Thinner 808
  • Application method: Brush, roller, paint
  • Drying times: Touch dry after 30 min at 10 °C; recoatable after 8 hrs at 10 °C
  • Refloating time (time between painting and launching): 24 hrs to 9 months

Further information on application can be found in the technical data sheet under “Downloads”.

more information

from €35.90*

Content: 0.7519 (€47.75* / 1 Liter)

€35.90*

Content: 0.7519 Liter (€47.75* / 1 Liter)

Prices incl. VAT plus shipping costs

colour
contents
Geb

Description

HEMPEL'S Ecopower Racing is a biocide-free, hard underwater hull paint with Teccel anti-adhesion technology (PTFe) for a particularly smooth and low-friction surface.
Recommended for all waters with light fouling pressure and for all waters with high environmental requirements. Suitable for all boat building materials.

Note: The effectiveness of biocide-free underwater coatings depends on the area of operation and the boat's sailing characteristics. Regular inspection of the hull during the season is recommended. Any fouling that occurs can be minimized by gentle cleaning with a sponge or soft brush.


Technical data

  • Area of use: For waters with light fouling pressure
  • Boat type: For fast sailing and motorboats
  • Substrate (with suitable primer): GRP, wood, plywood, aluminium, steel; existing hard antifoulings in good condition 
  • Primer: HEMPEL Light Primer, HEMPEL Underwater Primer
  • Coverage: 12 m²/l
  • Thinner: Hempel's Thinner 808
  • Application method: Brush, roller, paint
  • Drying times: Touch dry after 30 min at 10 °C; recoatable after 8 hrs at 10 °C
  • Refloating time (time between painting and launching): 24 hrs to 9 months

Further information on application can be found in the technical data sheet under “Downloads”.

Downloads

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
Legal information about the product
CLP Regulation
Symbols ghs02 ghs07 ghs08 ghs09
Signalword Attention!
H phrases H226, H335, H336, H351, H411
P phrases P102, P101, P201, P280, P210, P271, P273, P261, P391, P308+P313, P304+P312, P405, P403+P233, P501
HEMPEL Thinner No. 808
HEMPEL Thinner No. 808
HEMPEL Thinner No. 808 is suitable for thinning single-component HEMPEL antifoulings and for cleaning tools such as brushes or rollers.

€20.90 *
Details

More Products from Category Hard antifouling

HEMPEL ECOPOWER Racing biocide free
HEMPEL ECOPOWER Racing biocide free
HEMPEL'S Ecopower Racing is a biocide-free, hard underwater hull paint with Teccel anti-adhesion technology (PTFe) for a particularly smooth and low-friction surface.Recommended for all waters with light fouling pressure and for all waters with high environmental requirements. Suitable for all boat building materials.Note: The effectiveness of biocide-free underwater coatings depends on the area of operation and the boat's sailing characteristics. Regular inspection of the hull during the season is recommended. Any fouling that occurs can be minimized by gentle cleaning with a sponge or soft brush.Technical dataArea of use: For waters with light fouling pressureBoat type: For fast sailing and motorboatsSubstrate (with suitable primer): GRP, wood, plywood, aluminium, steel; existing hard antifoulings in good condition Primer: HEMPEL Light Primer, HEMPEL Underwater PrimerCoverage: 12 m²/lThinner: Hempel's Thinner 808Application method: Brush, roller, paintDrying times: Touch dry after 30 min at 10 °C; recoatable after 8 hrs at 10 °CRefloating time (time between painting and launching): 24 hrs to 9 monthsFurther information on application can be found in the technical data sheet under “Downloads”.

From €35.90 *
Details
HEMPEL HARD RACING TecCel Hard Antifouling
HEMPEL HARD RACING TecCel Hard Antifouling
HEMPEL'S HARD RACING TECCEL is a highly effective premium hard antifouling with copper compounds as the active ingredient, which offers optimum fouling protection due to the hard binder, especially on fast motorboats, trailer boats and boats that fall dry in the mudflats. Suitable for waters with high fouling pressure. Modified with TecCel anti-adhesion technology (PTFE), it is smoother and has less friction than conventional hard antifoulings. Can be painted on all hull materials except aluminium (exception: white colour).Technical DataArea of use: For waters with heavy fouling pressureBoat type: For high-performance boats and racing yachtsSubstrate: GRP, wood, plywood, steel; not suitable for aluminium, existing hard antifoulings in good conditionPrimer: HEMPEL LIGHT PRIMER, HEMPEL UNDERWATER PRIMERCoverage: 13 m²/lThinner: Hempel's Thinner 808Application method: Brush, roller, paint padDrying times: Touch dry after 30 min at 10 °C; recoatable after 8 hrs at 10 °CRefloating time (time between painting and launching): 24 hrs to 9 monthsFurther information on application can be found in the technical data sheet under "Downloads".

From €38.90 *
Details
SEAJET 037 COASTAL Antifouling
SEAJET 037 COASTAL Antifouling
SEAJET 037 COASTAL is a hard antifouling with a hard matrix that is particularly suitable for fast boats and coastal areas where boats can fall dry. Also suitable for salt and fresh water areas. Can be applied to all boatbuilding materials (except aluminum). 2-3 coats are recommended as a base coat.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 70 knotsSubstrate: all materials except aluminum (with appropriate primer)Coverage: approx. 10 m²/lThinner: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 4.5 hours, recoatable: after approx. 9 hours.Time between painting and wetting at 10°C: at least 10 hours.For processing information, please refer to the technical data sheet under "Downloads".

From €35.90 *
Details
VENEZIANI EUROSPRINT ECO Biocide Free UW-Paint
VENEZIANI EUROSPRINT ECO Biocide Free UW-Paint
VENEZIANI EUROSPRINT ECO is a biocide-free, solvent-based paint for underwater hulls. Thanks to the hard matrix, it is also suitable for high sailing speeds. The paint can be applied to all substrates and is suitable for mixed and fresh waters.Note: The effectiveness of biocide-free underwater coatings depends on the area of operation and the boat's sailing characteristics. Regular inspection of the hull during the season is recommended. Any fouling that occurs can be minimized by gentle cleaning with a sponge or soft brush.Technical dataArea of application: Waters with light foulingBoat type: Motor and sailing boats of all speedsSubstrate (with appropriate primer): all materials, including aluminumCoverage: approx. 12.5 m²/lDilution: VENEZIANI Thinner 6470Application method: Brush, roller, spraying (professional use only)Drying times at 10°C: Recoatable: after approx. 18 hoursService life (time between painting and wetting) at 10°C: min. 24 hours to 6 monthsFurther information on processing can be found in the technical data sheet under "Downloads".

From €47.90 *
Details
YACHTCARE ANTIFOULING ACTION Hard Antifouling
YACHTCARE ANTIFOULING ACTION Hard Antifouling
YACHTCARE ANTIFOULING ACTION is an economical and effective hard antifouling with copper compounds as the active ingredient and an insoluble binder. This provides very good fouling protection especially for fast motorboats, trailer boats, and boats that dry out in tidal flats. Developed for Northern European inland and coastal waters. It can be used on all primed surfaces and boat materials except aluminum.Technical DataApplication area: For all Northern European inland and coastal waters with moderate fouling pressure; not recommended for warm watersBoat type: For sailing and motorboats, especially suitable for fast motorboats, trailer boats, and boats in dry marinasSubstrate: GRP, steel, wood; not on aluminumPrimer: YACHTCARE Epoxy Primer (Art.No. 2520-014) or YACHTCARE Antifouling Primer (Art.No. 2520-012)Coverage: approx. 13 m²/lThinner: YACHTCARE ANTIFOULING THINNER (Art.No. 2520-009), (5–10% optional)Application method: Brush, mohair rollerDrying times: Recoatable after 6 hrs at 20 °CPot life (time between painting and launching): 24 hrs to 6 months

From €36.95 *
Details
YACHTCARE PROTECTOR HARD Bioicde Free Bottom Paint
YACHTCARE PROTECTOR HARD Bioicde Free Bottom Paint
YACHTCARE PROTECTOR HARD is a biocide-free, hard matrix bottom paint for sail and motor boats made of GRP, steel, wood or aluminum. Contains the LUBRICATOR FLUID developed by YACHTCARE, which makes it difficult for fouling to adhere to the surface.Application: For new boats, the hull should be primed accordingly, e.g. with YACHTCARE Antifouling Primer or YACHTCARE Epoxy Primer. On existing hard antifouling, the coating can be applied directly to conventional hard antifouling (not PTFE-containing) after light sanding; a conversion primer is not necessary.Note: The effectiveness of biocide-free underwater coatings depends on the area of operation and the boat's sailing characteristics. Regular inspection of the hull during the season is recommended. Any fouling that occurs can be minimized by gentle cleaning with a sponge or soft brush.Technical DataArea of use: For fresh, salt, and brackish water with low to medium fouling pressureBoat type: For sailing and motorboatsSubstrate: GRP, steel, wood, aluminium; directly over hard antifouling or with primer for new buildPrimer: Epoxy Primer or Antifouling Primer (depending on substrate)Coverage: approx. 11 m²/lThinner: Not recommendedApplication method: Brush, short-pile mohair or foam rollerDrying times: Recoatable after 6 hrs at 20 °CRefloating time (time between painting and launching): 24 hrs to 6 monthsFurther information on application can be found in the technical data sheet under "Downloads".

From €42.90 *
Details

Last seen products