Cleans tools, paint brushes and other working material. Effective for metal cleaning, epoxies, polyester resin and fiberglass. Can be used as thinner for many products. Degreases sanded surfaces.
PANTASOL LIGHT is a purely distilled cleaner with natural lemon extracts without acetone and xylene that is ideal for preparing bonding and varnishing. PANTASOL LIGHT vents completely without leaving any residue. Especially recommended for sensitive surfaces, does not even attack polystyrene. Ideal for removing sticker residues, grease, adhesive, oil, wax, preservatives, fresh epoxy adhesives, silicone, PU and SMP sealants. It does not attack fully hardened paints and is neutral to most plastics (test first), does not leave an oil film.Container: 1-litre can or 500 ml spray bottle
Silicone remover is a high-quality cleaner with a short evaporation time. Suitable for the complete removal of silicone oil residues, greases, oils and waxes before coating or sealing.
The product uses natural active ingredients to remove weather-related graying and soilingstains from wooden surfaces and brightens the wood again. Ideal for pretreating old wooden surfaces that are to be oiled afterwards. Application: Shake the container well before use, then apply with a brush and leave it for 15 minutes. Wash off with water and a brush. Do not use in direct sunlight. Allow the surface to dry well afterwards.
Special cleaner and bleach for weathered and dirty wood surfaces, especially teak decks.But also cleans GFK, gelcoat and especially insbesondere antislip or structurered deck floorings, removes yellowed and rust spots.Greyed teak decks will get back their warm wooden, the original color is renwed and prepared for new protection.Contains oxalic acid, please observe the necessary safety precautions and recommendations for use !
An industrial cleaner from the makers of OWATROL, that is also applicable to boat care and to preparations to varnish (degreasing).With its new hybrid system PURATROL is able to dispense an enormously large spectrum of different and tenacious staining, without pitting the surface.It is a concentrate free of solvents and acids, which can be diluted with water by up to 20 times.The application is simple: apply, leave it for 10 minutes and wash it off with clean water.
Before every painting and protection job, a proper and professional cleaning of the surface is necessary. This highly effective cleaner removes oil, grease, fuel, and even silicone residues reliably from painted or GRP finishes. Not intended for cleaning raw wood.