Cleans tools, paint brushes and other working material. Effective for metal cleaning, epoxies, polyester resin and fiberglass. Can be used as thinner for many products. Degreases sanded surfaces.

Fast-volatile and effective agent for cleaning and degreasing surfaces before painting or bonding. Dissolves fresh paint and adhesive residues without causing lasting damage to the surface.

Hight purified paraffin, for cleaning tools and all paraffin-resistant surfaces.Dissolves oil, grease and wax.

Methylated spirit - 1 litre bottle.

Before every painting and protection job, a proper and professional cleaning of the surface is necessary. This highly effective cleaner removes oil, grease, fuel, and even silicone residues reliably from painted or GRP finishes. Not intended for cleaning raw wood.

The product uses natural active ingredients to remove weather-related graying and soilingstains from wooden surfaces and brightens the wood again. Ideal for pretreating old wooden surfaces that are to be oiled afterwards. Application: Shake the container well before use, then apply with a brush and leave it for 15 minutes. Wash off with water and a brush. Do not use in direct sunlight. Allow the surface to dry well afterwards.

Versatile water-based industrial cleaner for stubborn soiling on almost all surfaces. Whether oil films, grease deposits, soot or adhesive residues - OWATROL PURATROL removes even heavy residues thoroughly and gently. The alkaline cleaner is suitable for indoor and outdoor use, on horizontal and vertical surfaces, e.g. plastic windows, awnings, garden furniture, machines or workshop floors. PURATROL is also ideal for degreasing before painting. The cleaner is available as a concentrate and can be diluted with water as required. Subsequent neutralization is recommended for wooden surfaces to prevent any darkening.Application: Do not apply to hot surfaces. Ensure good ventilation. Dilute the concentrate in a ratio of 1:5 to 1:20. Apply the product and leave to work for ten minutes. Remove soiling with a brush or cloth, wash off cleaning agent residues with clear water. Repeat the application for heavy soiling &nbsp

Cleaner and brightener for weathered and soiled wooden surfaces, especially for teak decks.Suitable for cleaning GRP, gelcoat and especially non-slip or textured deck coverings, removes yellowing and rust stains. Grayed teak decks regain their original wood color, tannin-rich woods such as oak can be neutralized before recoating or after treatment with alkaline cleaners such asOWATROL DECK CLEANER.OWATROL DECK CLEANER is based on oxalic acid and is biodegradable.Safety note: Wear chemical-resistant gloves, safety goggles and protective clothing when using.Application: Dampen absorbent substrates such as wood with water. Shake the container to homogenize. Apply evenly, then leave to act for 10–20 minutes. Ensure the surface remains moist during this time (e.g. with a water hose). After the exposure time, rinse thoroughly with a brush or high-pressure cleaner to remove dirt from the pores. For heavily discolored areas, repeat the application if necessary. Wait at least three days before further treatment with oils or varnishes (e.g. OWATROL DECK SEALER or AQUADECKS). Technical dataApplication area: grayed wood, GRP, gelcoat, varnish, plastic, natural stoneSubstrate: clean, dry, cover metal partsApplication: brush, sponge, lambskin roller, spray deviceCoverage: approx. 5–20 m²/l Thinning: undiluted or up to 1:5 with water (cleaning)Processing temperature: +5 °C to +25 °CDrying (20 °C): min. 3 days before further treatment with oil or varnishFurther information on application can be found in the technical data sheet under "Downloads".

PANTASOL LIGHT is a purely distilled cleaner with natural lemon extracts without acetone and xylene that is ideal for preparing bonding and varnishing. PANTASOL LIGHT vents completely without leaving any residue. Especially recommended for sensitive surfaces, does not even attack polystyrene. Ideal for removing sticker residues, grease, adhesive, oil, wax, preservatives, fresh epoxy adhesives, silicone, PU and SMP sealants. It does not attack fully hardened paints and is neutral to most plastics (test first), does not leave an oil film.Container: 1-litre can or 500 ml spray bottle

Silicone remover is a high-quality cleaner with a short evaporation time. Suitable for the complete removal of silicone oil residues, greases, oils and waxes before coating or sealing.

Cleaner and universal thinner for BENAR, OWATROL and all other oil- or alkyd-based paints.