Installation material for cables
Small cable clamp made from 1,5mm stainless steel sheet. For 10mm cable.
Grey plastic box with rubber cable entries and strip terminals.
Self-vulcanising sealing tape that becomes completely watertight when stretched.Particularly versatile in the deck area and for insulation.ROTUNDA vulcanising tape can be used to reliably seal the mast collar (mast sleeve), for example. Tightly applied, the tape welds itself immediately. To remove it, simply cut into it and it can be removed quickly, easily and without any annoying fiddling with adhesive residue.The tape has also proved to be a good choice for taping off saling cams or securing cotter pins.
An assortment of wire connectors and terminals. 175 pieces in a transparent compartmentalized box.
Black plastic box with rubber cable entries and strip terminals.The box can also be employed for visible distribution box on classic boats.
Double pipe clamp made of stainless steel (INOX A2), optionally with swivel or fixed.The pipe clamp is designed for a pipe diameter of 25 mm.It can be used, for example, to attach a liferaft bracket (see ‘Accessories’) to the pushpit or a solid railing. Four pipe clamps are recommended for this.The double pipe clamp can also be used in many other ways: for example, for laying (aerial) cables on the pushpit or along the railing. Or for attaching an equipment carrier (for solar panels) to the pushpit.
Heat shrinkable tubing, coated inside with hot melt adhesive, halogen-free.Supplied in whole lengths of 1.20 m.Color: black.Application range: -55°C to +125°C.
Clamp cable lug made of copper. Cable connection without tools, without soldering.For cable cross-sections from 10 mm² to 90 mm².
WAGO terminal blocks for connecting cables in various sizes. The modern and simple version of the luster terminal. No screwdriver required, simply open the terminal, insert the cable and close it again. Very high holding force, the transparent design allows you to see whether the cable has been pushed through to the end. Versions with different numbers of cable connections. Available in packs of 10 or larger.For solid, fine or stranded cables from 0.14 to 4 mm diameter. Certified by DNV (GL), Lloyds and others. Rated current max. 32 A, rated voltage max. 450 V, max. through-temperature 105 °C
Cable shoe with receptacle and partial plastic coating, full coating or with V-connection. Different colours for different currents.Come in sets of 10 or 100 pcs.
Black heat shrink tubing with a shrink ratio of 2:1 sold by the metre.
196-piece set of shrink tubing with a shrink ratio of 2:1 with 6 different sizes.Sizes range from 2.0 to 12.0 mm. Multiple designs in a practical plastic box.Colour: black.
Cable shoe with eyelet and plastic coating in different sizes and colours.Shipping in sets of 10 or 100.
Flat cable shoe with plastic coating in different colours.Shipping in sets of 10 or 100.
Cable shoe joint connector with plastic coating in different colours.Shipping in sets of 10 or 100.
Practical assortment of 430 isolated wire end ferrule, in five sizes.Dispenser box with rotating top for practical removal.For wire diameters 0.75/1.5/2.5/4.0/6.0mm².Refill bags of 100 of any size are available.
A set to make cable connections that are simple to separate (mast installations, equipment circuits) up to 2,5 sq. mm.The 12 connections can be shortened according to demand. Shipping with core end sleeves (1 sq. mm), contraceptive coil and cable retainers. The contact elements are made from galvanized brass, the screws are from stainless steel.
Two part pipe clamp from stainless steel for fitting with two scews, washers and nuts
Cable fitting made from plastic, issued for cables 7-13 mm. Colour: grey.
Cable shoe with fork and plastic coating in different sizes and colours.Shipping in sets of 10 or 100.
