Keeping the place below deck well organized is essential seamanship, especially when sailing with a larger crew. If important things cannot be found in unpredictable situations, it can be dangerous. In the cabin, everything should have a fixed place and be secured against falling. Things that have to be quickly at hand can best be hung on board with a hook. For this, we offer solid, maritime hooks made of brass or stainless steel. They are stylish for classic or modern interiors on ships or for house and apartment. We have towel hooks and wardrobe hooks and special cup hooks for the galley. These are available with or without a base plate for screwing in. Fixed or swivel coat hooks ensure that oilskins and sweaters are always ready to hand. Swivel hooks or retractable hooks offer optional use. Otherwise, they are folded in and do not get in the way.
Hooks
Rotating, 3 hooks. Base plate D = 40 mm, height = 44 mm.Rolled or nickeled brass.
Solid, heavy coat hook.Chrome plated or high gloss polished surface.
Clothes hook with hat hook.Three-part, pivoting.Brass, polished or chromed finish.
The small version of the classic hat and coat hook. The hat holder is shorter and does not protrude far into the room, which is an advantage if the coat rack is to be placed in a passageway, for example.Base plate with countersunk holes, diameter 4mmMade of brass, available in four different surface finishes.Made in Germany.
Heavy swivelling wardrobe hook, traditionally sand-cast of brass, polished finish.Small dents in the finish are signs of thenon-industrial manufacturing processand give the hook exceptional charm.
Three-part clothes hook.Brass, polished or chromed finish.Practical pivoting hook.
Clothes hook with hat hook.Three-part, pivoting.Brass, chromed finish.
Sturdy, foldable coat hook made from hand polished sand cast brass.The ground plate is lily shaped, the foldable stake is equipped with six notches to take up coat hangers.Folded the hook extends only 30 mm.
Heavy swivelling wardrobe hook, traditionally sand-cast of brass, polished finish.Small dents in the finish are signs of thenon-industrial manufacturing processand give the hook exceptional charm.
Small design of cast brass.Polished or chromed finish.
Elegantly shaped coat hook made of brass, available in polished brass, chrome-plated brass and matt chrome-plated brass.The simple and shapely design in combination with the chosen finish makes the hanger look good in almost any interior.Made in Germany.
Flush spring-loaded hook, which remains closed when not in use. With two hidden screw holes in the backing plate. Comes in polished, chromed or matte-chromed finishes.
Clothes hook with hat hook.Three-part, pivoting.Brass, polished or chromed finish.
Heavy swivelling wardrobe hook, traditionally sand-cast of brass, polished finish.Small dents in the finish are signs of thenon-industrial manufacturing processand give the hook exceptional charm.
Three-part clothes hook.Brass, polished or chromed finish.Practical pivoting hook.
Clothes hook with hat hook.Three-part, pivoting.Brass, chromed finish.
Heavy countersunk hook of cast brass with two brass bolts and threaded counterplates. The extracted hook is vertical, so that nothing can fall from the hook when heeling. Available finishes: matt and chromed brass.
Beautiful, delicate, swinging design hook with a small ball on the point of the hook.Ground plate is 35 x 20 mm and it pivots only 7mm when folded.
Sturdy, foldable coat hook made from hand polished sand cast brass.The ground plate is lily shaped, the foldable stake is equipped with six notches to take up coat hangers.Folded the hook extends only 30 mm.
Heavy swivelling wardrobe hook, traditionally sand-cast of brass, polished finish.Small dents in the finish are signs of thenon-industrial manufacturing processand give the hook exceptional charm.
Brass cup hook with steel set screw (lenght approx. 25 mm).Finish: rolled, polished, chromed or matt chromed brass.
Rotating, 3 hooks. Base plate D = 40 mm, height = 44 mm.Rolled or nickeled brass.
Flush spring-loaded hook, which remains closed when not in use. With two hidden screw holes in the backing plate. Comes in polished, chromed or matte-chromed finishes.
The small version of the classic hat and coat hook. The hat holder is shorter and does not protrude far into the room, which is an advantage if the coat rack is to be placed in a passageway, for example.Base plate with countersunk holes, diameter 4mmMade of brass, available in four different surface finishes.Made in Germany.
Heavy, classic knob made of solid brass. The knob is fastened with a blind hole M4. Available in polished brass or chrome-plated brass.Weight: 70 g.
Strong, sturdy coat hook with two arms made from brass with 4 screw holes.In the surfaces polished brass, chrom plated or matt chromed brass available.Weight: 170 g.
Heavy, classic double hook with beautifully shaped base plate and slender drop shape. Made of sand-cast brass. Available with polished or chrome-plated surface.
Elegant drawer knob from brass in a concave design.The surface is polished or chromed brass.The handle is mounted from the back by means of two M4 blind hole bores.
Small wall hook made from 2 mm thick A2 stainless steel flat stock.
Brass cup hook with steel set screw (lenght approx. 25 mm).Finish: rolled, polished, chromed or matt chromed brass.
The practical and beautiful screw hooks made from stainless steel with a ball at the end point can be used manifold.
The practical and beautiful screw hooks made from stainless steel with a ball at the end point can be used manifold.
Practical and beautiful screw hooks made from stainless steel with a ball at the end point. Can be used manifold.
Small, shapely hooks from polished brass with a stud screw made from steel. Length of thread: 25 mm.
