On ships, safe use of ropes and cordage requires proper handling and appropriate use. With suitable accessories, boat lines can be prevented from abrasion and strain. Their service life can thus be considerably extended. One of the main causes of abrasion is the chafing of the ropes on hard uneven spots or sharp edges. A yacht is constantly moving in the water. Friction occurs and in the worst case, the rope chafes right through. Synthetic fibre ropes can melt due to frictional heat. Chafe protection, chafe guards and rope covers like polyester hoses or fire hoses also help to prevent squeaking of the mooring lines. Mooring compensators provide cushioned relief for mooring lines, pier and deck fittings. The dampers prevent possible creaking and at the same time they protect the ropes from overstretching.
- Rigg & sail
-
Rope & cordage
- Traditional hemp coloured rope
- Natural fibre rope
- Rope for handrails
- Fender rope
- Recycled rope GREENLINE rPET
- Mooring, anchoring & towing line
- Rope for working boats
- Modern yacht rope
- Safety lines & floating lines
- Heaving lines & heaving weights
- Shock cord, webbings & sail ties
- Cordage & whipping twine
- Railing net
- Accessories for ropes
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Accessories for ropes
An indispensable aid when mooring in harbours with a tidal range.Our MOORING dalben mooring line prevents the boat from getting "stuck" on the dalben.Attached to a mooring line, the dalben mooring line is placed over the dalben. The round floats ensure that the line can roll up and down unhindered with the tidal range.Made from 14 mm SPUNFLEX rope, with eyes spliced in on both sides and 18 sturdy, white floats made from PE plastic.The rope is manila brown and has a breaking load of 2790 daN, total length 1.30 m.
Very stable mooring compensator made of A4 stainless steel (AISI 316).The mooring spring is particularly suitable for permanently installed mooring lines in problematic, unprotected berths with a lot of swell.The jerk springs are also suitable for high ship weights (see specifications in the table below).
Proven mooring compensator made of very elastic, weather- and seawater-resistant, black EPDM rubber - boat and ropes are protected.With very effective rope clamping mechanism. The line can be easily fitted and adjusted around the mooring compensator.The damping can be adjusted based on the number of wraps.Installation instructions and information on determining the additional cordage consumption can be found in the data sheet further down on this page under "Downloads & Information".
Shock absorber made of elastic, black polymer plastic. Protects against impacts and shocks, does not discolour.Can be attached in seconds to any line with a diameter between 10 mm and 20 mm. You can see the procedure in the photos. Can be used for mooring lines, mainsheets or anchor lines.Optimum shock absorption when using 4 pieces next to each other, or 6 pieces for longer mooring times. Two shock absorbers are recommended for use in the mainsheet.Supplied as a set of 2.
Patented, highly elasticated mooring compensator with removable, high-strength clamping bridges (U-Cleats) at the ends. This allows the mooring compensator to be easily attached to a mooring line or repositioned without having to pull one end of the line through.Material: particularly weather- and seawater-resistant EPDM rubber.
Mooring compensator made from seawater-proof and UV-resistant EPDM rubber.Very simple mounting (slides onto the docklines) and good efficacy.Colour: black.
The rat guard from commercial shipping is an indispensable protection against unwanted rodents on board in many harbours around the world. The rat guard is made of 0.8 mm thick, galvanised sheet steel and has a diameter of 600 mm.It is opened on one side with a wing nut and attached to the mooring line as a barrier for the rats. As it is infinitely adjustable, it is suitable for mooring lines with a diameter of 50 mm to 68 mm.Weight: 1.5 kg.The rat guard is also available in a stronger version (1.0 mm thick, galvanised sheet steel). You will find this version (Article-No. 2811-001) further down on this page under "Similar products".
Extremely effective protection against rodent pests!The rat plate is a further development of the well-known rat guard used in commercial shipping. The rat plate made of red, very smooth polystyrene hard plastic can be stowed to save space and is very easy to install without tools.The plate is mounted rotatably on the two-part PVC centre piece, which encloses the mooring line. The centre piece is locked magnetically.If the rats try to climb over the locking disc, they will inevitably fall off.Weight: 350gEspecially for use on larger ships, you will find two larger, black versions of the rat plate (Article-No. 2811-036 and 2811-045) further down on this page under "Similar products".
Extremely effective protection against rodent pests!The rat plate is a further development of the well-known rat guard used in commercial shipping. The rat plate made of black, very smooth polystyrene hard plastic can be stowed to save space and is very easy to install without tools.The plate is rotatably mounted on the two-part PVC centrepiece, which encloses the mooring line. The centre piece is locked magnetically.If the rats try to climb over the locking plate, they will inevitably fall off.Especially for use on (smaller) yachts, you will find a smaller version of the rat plate (Article-No. 2811-034) further down on this page under "Similar products".
The rat guard from commercial shipping is an indispensable protection against unwanted rodents on board in many harbours around the world.The rat guard is made of 1.0 mm thick, particularly strong, galvanised sheet steel and has a diameter of 540 mm.It is opened on one side, attached to the mooring line as a barrier for the rats and secured with two wing nuts. As it is infinitely adjustable, it is suitable for mooring lines with a diameter of 50 mm to 100 mm.Weight: 2.5 kg.The rat guard is also available in a lighter version (0.8 mm thick, galvanised sheet steel). You will find this version (article no. 2811-000) further down on this page under "Similar products".
Easy-to-use chafe guard tube made from a preformed black, elastic plastic mat in a spiral shape. This is made of soft, UV-resistant polyurethane.The plastic mat is simply wrapped around the mooring line and pushed to the area that is to be protected from pubic mould. Thanks to the special manufacturing process, the material rolls around the rope and does not need to be attached separately.The SPIROLL chafe guard also prevents the polyester mooring line from squeaking in the lip.
Chafe guard made of extremely abrasion-resistant, UV-resistant polyester fabric.The fabric protects the mooring line from chafing on sharp edges, hawse holes or rough concrete piers.With the practical Velcro fastener and fastening straps, the mooring line protector can be attached in seconds and stays in place on the mooring line to be protected.Colour: white.
Fire hose has long been recognised in commercial shipping as the most robust and effective abrasion protection for ropes.The hose is made of high-strength polyester fabric and is coated on the inside with EPDM rubber.The protective sleeve can be pulled onto the mooring eye before splicing. Available by the metre in your desired length.Colour: white with identification thread.
Adhesive film to protect gelcoat, varnish and paint on the edge of the boat from mooring lines.The transparent, abrasion-resistant and UV-resistant adhesive films are quickly and easily applied to the areas to be protected.Set consisting of the following adhesive films:2x 125 x 150 mm1x 100 x 125 mm1x 75 x 125 mm
Comfortable tying up to mooring buoys or rings. This sturdy stainless steel mooring hook provides a reliable connection between mooring buoy and vessel. The connection can be conveniently secured and released on board by means of an internal, spring-loaded remote release.The strong construction has a total length of about 90 cm and consists of a hook made of 12 mm round steel and a welded-on tubular rod (Ø 17 mm) with an internally guided 12 mm spring-loaded bolt as a remote release. The hawser or mooring line is attached directly to the eye of the hook and guided on deck via a fairlead (Ø 28 mm) welded to the upper end of the rod.
Short hook to hold the boat near slippery steps and rings, helps in locks and and other mooring situations.Strong stainless steel rod (D = 10 mm) with handle.
Practical hook as a mooring aid, for example when mooring in locks, on dolphins, on bollards or to hold the ship on slippery stairs and rings. Strong V4A stainless steel round material (D = 10 mm) with welded line eye.
Long hook with hand grip to hold the boat near slippery steps and rings, helps in locks and other mooring situations.Strong stainless steel rod (D = 10 mm) with handle.
Aluminium basket with feet, into which the mooring lines are placed and can then be neatly sorted and stored clear of the deck.An important product from the commercial shipping industry to ensure that the deck is always clear.Other sizes on request.
Cover made of heavy, green PVC cloth for our rope basket.Protects the mooring lines from UV radiation.
Made from strong matte bronze for the hanging-up of rope, fenders, boat hooks, oars, etc.Delivery without the pictured cordage.
Stainless steel holder for life rings.Also well suited for hanging rope, fenders, tools, etc.
