Go to homepage
€0.00*
Jobs
Catalogue
Quick order


Stainless steel holder for life rings.
Also well suited for hanging rope, fenders, tools, etc.

Description

Stainless steel holder for life rings.
Also well suited for hanging rope, fenders, tools, etc.

Questions about the product?

Last seen products

More articles from this category

Air pump BRAVO 4
Air pump BRAVO 4
Heavy-duty double action hand pump with hose and various nozzles.Intended for inflatable dinghies, fenders, etc. Sucks both air and water.Cylinder diameter 100 mm,height about 450 mm,power approx. 4 l of air per pump.

€37.00 *
Details
SCOPREGA BRAVO 2 / 10 foot pumps
SCOPREGA BRAVO 2 / 10 foot pumps
Universally employable foot pump for rubber dinghys, fenders and much more.The model BRAVO 2 is a strong one chamber pump with 6.5 l air volume and various attachment pieces. The model BRAVO 10 is a two chamber pump. With the second chamber (1,65 l) a pressure of 0,8 bar is reached; also suitable for removing air.

From €42.00 *
Details
Fender board mahagony plywood
Fender board mahagony plywood
The fender plank is an important tool when berthing in tidal waters, along sheet pile walls or on dolphin posts.High quality water-proof marine plywood AW 100 from mahogany with rounded corners and four holes for cordage.Varnished with UV resistant matte varnish.

€145.00 *
Details
Plaited fender line with eye splicing
Plaited fender line with eye splicing
Made from high quality, double braided polyester cordage with a spliced eye on one end.Eye length 200 mm, colour white.Also employable as ratline or as seizing with many uses on board.

From €5.50 *
Details
Boathook holder for lashing at the shrouds
Boathook holder for lashing at the shrouds
Stainless steel bracket for attachment with tape, cable ties or whipping at the shrouds.

€20.50 *
Details
Boathook holder basket for lashing at the shrouds
Boathook holder basket for lashing at the shrouds
Stainless steel bracket for attachment with tape, cable ties or whipping at the shrouds.

€34.90 *
Details
Boathook holder for screwing at the shrouds
Boathook holder for screwing at the shrouds
Stainless steel bracket for mounting at the shrouds. Attachment with welded stainless steel clamp and screw M4. Maximum wire thickness 7 mm.

€26.91 *
Details
Boathook holder basket for screwing at the shrouds
Boathook holder basket for screwing at the shrouds
Stainless steel bracket for mounting at the shrouds. Attachment with welded stainless steel clamp and screw M4. Maximum wire thickness 7 mm.

€45.90 *
Details
Plastic spring clip
Plastic spring clip
Made from plastic suitable for boat hooks, spinnaker poles as well as tiller extension.Colour: anthracite.

From €2.90 *
Details
Spring clip, plastic
Spring clip, plastic
Solid spring clip made from black plastic with two screw holes for mounting.

From €3.11 *
Details
Boathook holder / spring clip
Boathook holder / spring clip
Strong tube clamps (white or black) made from plastic, that can be employed as boathook holders, door handle clamps or bracket für the tiller. Up to size 55 x 22 mm the clamps are fixed with one central screw, the larger sizes are fixed with two side screws.Material: UV stabilised plastic SANTOPRENE.Shipping in pairs as a set.Colour: black or white.

From €2.65 *
Details
Folding boathook holder
Folding boathook holder
Sturdy fold out holder made from black plastic with a spring lock-in position, the base plate is made from stainless steel.

€19.90 *
Details
Fender cleat CLAMCLEAT®
Fender cleat CLAMCLEAT®
With the loop cleat it is easy to hang and tighten heavily loaded straps.Intended, for example, for hanging fenders on the railing or for securing tarpaulins.Robust manufacture, cleanly molded from black seawater-resistant nylon.These practical cleats, which have been available in England for over 40 years, are now indispensable onboard. In the mean time, CLAMCLEAT® has produced more than 200 different models and designs, not only for sailors, surfers or hang-gliders, but also for many uses in daily life.

From €5.90 *
Details
POLYFORM fender pump
POLYFORM fender pump
Powerful fender pump, made of plastic with a wooden handle. Cylinder diameter: 60 mm. Cylinder length: 400 mm. Tip diameter: 7 and 10 mm.

€44.90 *
Details
POLYFORM Fender pump MINI
POLYFORM Fender pump MINI
Small fender pump, made of plastic. Cylinder diameter: 34 mm. Cylinder length: 110 mm. Tip diameter: 7 mm.

€34.00 *
Details
POLYFORM valve adapter
POLYFORM valve adapter
With the valve adapter POLYFORM fenders can also be inflated with an air pump or at the gas station.You can check which adapter you need for your fender by looking at the logo on the fender head or the shape of the valve screw.

From €4.90 *
Details
Boathook holder
Boathook holder
Teak chock 70 x 30 x 40 mm with integrated rubber ring for securing boat hooks.Comes in pairs with 10 mm bungs.

€41.95 *
Details
Fender baskets NAWA
Fender baskets NAWA
Fender basket, made from stainless steel wire (4 mm), matches POLYFORM long fenders.For installation: The twistable universal connection of black polyamide allows attachment on 25 mm railing pipe (two connectors required). To attach two or more baskets, you need a pair of parallel connectors for each. The connectors come with matching stainless steel screws, all you need is a screwdriver.Please note that the connectors are not supplied with the fender baskets and must be ordered separately!

Price on request
Details
Fender Cover for Ball Fender
Fender Cover for Ball Fender
Protect your boat with fender socks. A fender cover offers protection against scratches and rubbing marks from the fender on the boat hull, and effectively prevents squeaking and fender abrasion. The covers also prevent the fenders from getting dirty and protect them from UV radiation.The fender cover is stretchable and can be easily pulled over the fender. The hems are held together with ribbons.The fender socks are washable and fit perfectly with POLYFORM ball fenders or corresponding fenders from other manufacturers.

From €22.50 *
Details
Fendercover for Long Fender
Fendercover for Long Fender
Protect your boat with fender socks. A fender cover provides protection against scratches and fender rubbing marks on the hull, squeaking and fender abrasion are effectively prevented. The covers also prevent fenders from getting dirty and protect them from UV light.The fender socks are washable and fit exactly to the POLYFORM long fenders or to corresponding fenders of other manufacturers.Color: darkblue.Sizes F4 (item 1888-204) and F8 (item 1888-208) are made of a smooth polyester knit sock, for all other sizes the fender sock is made of a fleecy acrylic fabric.The fender cover is stretchable and easy to pull over the fender. The hems of the smooth polyester version are held together with ties.The acrylic fabric version has an elastic band on one side.

From €16.70 *
Details