On most sailing and motor yachts, liquids such as fuel, fresh water, wastewater, greywater and possibly heating oil are carried in tanks. Refilling water, refuelling diesel and pumping out wastewater are tasks done from the deck of the boat. To avoid confusion and inconvenience when filling, appropriate deck fills and pump out deck fills are to be sensibly positioned, spatially separated and clearly marked. At Toplicht you will find shapely, solid filler caps for traditional ships and yachts. Cranked or straight models of water and fuel fillers are available in polished or chrome-plated brass, bronze and stainless steel. Besides, some special marine deck filler caps are secured by a wire and have an engraved, foldaway handle. For pumping out holding tanks, we offer pump out adapters which can be screwed into corresponding wastewater deck fills.
Deck fills & waste pump out fittings
Pump out deck fill made of durable composite plastic. The colored marking of the nozzles prevents confusion during filling.The caps are made of polished stainless steel, with a black plastic ring engraved with the tank marking. The screw cap can be opened with a winch crank.Complies with ISO 8099 and is suitable for suction stations.Corresponding plastic deck fills for fresh water and fuel can be found under similar products.
Pump out adapter ISO 4567, for waste water deck fittings with 1 1/2 inch threaded inlet. With O-ring seal.This nozzle is screwed into the deck connection to make an adapter for pumping holding tanks, in connection with a pump-out station.The gland conforms to the general norm for pump-out stations.Deck-fill piece sold separately.
Essential deck fitting for emptying holding tanks: Exhaust port size ISO 4567, so conventional suction hoses will fit precisely.Heavy brass design, polished or chromed.Unmistakable inscription "Pump Out".Hex fitting D = 38mm. A plastic universal key is included.
Elegant design with overhanging cap, which also conceals the fastening screws, available with polished brass or chrome-plated surface.The deck fittings with a diameter of 38 mm are suitable for faeces tank suction at shore-side pump-out stations in conjunction with the screw-in pump-out adapter (item no. 1998-100, see accessories), which must be ordered separately.The lid is secured with a wire rope and has a retractable handle engraved with the word "WASTE", which allows it to be opened and closed without tools. The wire rope safety device cannot be used when using the pump-out adapter. In this case, it can be easily removed.You will find deck filler necks for fresh water and fuel corresponding to the version under similar products.
Elegantly designed brass pump out deckfitting for faeces tank suction. Available with polished or chrome-plated surface. With overhanging closure that conceals the fastening screws and rim. The cover also has a retractable, labelled handle so that no tools are required to open it.The suction hoses of standard land-based faeces suction systems (ISO 8099:2000) can be inserted tightly.Deck filler necks for fresh water and fuel corresponding to the design can be found under similar articles.
Sturdy deck plate made of bronze with brushed or chrome-plated surface. Suitable as a classic deck filler. Large versions can also be used as a deck opening for the passage of crane gear for ships with inboard hot eyes or as a mounting flange for cowls.The deck plate is fitted with an O-ring seal and can be sealed tightly. The internal thread (BSP) runs through the entire opening so that corresponding fittings with an external thread can be screwed in on the underside.Cover versions either with slot or with two recessed holes Ø 5mm (see table). Suitable keys for opening are available under accessories & spare parts.
Filler caps made of A4 stainless steel (AISI 316), polished finish.The caps are available with four different inscriptions depending on the tank content. In addition, a small, coloured plastic label with icon is included in the scope of delivery, which can be glued into the corresponding deck fill to prevent confusion. The hinged handle is captive with spring-loaded pins.Supplied without the deck fill. You can find the matching stainless steel deck fills under similar products. These must be ordered separately.
Deck fill of A4 stainless steel (AISI 316), polished finish.The matching covers (sold separately) are available with various inscriptions and a foldable handle held captive with spring-loaded studs.The deck fill is suitable for waste tank suction in conjunction with the screw-in pump-out adapter, item no. 1998-100 (see under accessories & spare parts).In combination with pump-out adapter Article-No. 1998-100, the deck fill can also be used to empty wastewater tanks.Comes without cover and screw sockets. You can find these articles similar products.
Sturdy brass deck fill, with hose nozzle and cast-in labelling in the rim, "WATER", "DIESEL" or "FUEL" can be selected depending on the intended use.Cover with O-ring seal and chain, as well as slotted recess for opening at the top.Polished brass or chrome-plated brass finish.
Filler neck for water or diesel made of durable composite plastic. The colored marking of the nozzles prevents confusion during filling.The caps are made of polished stainless steel, with a black plastic ring engraved with the tank marking. The screw cap can be opened with a winch crank.Corresponding plastic pump out deck fills for blackwater and wasterwater can be found under similar products.
Graceful designed deck fill with a cantilevered cap, that also covers the mounting screws.The cover is secured with a thin wire rope and has a foldaway handle that allows it to be opened and closed without tools. The corresponding tank designation is engraved in the handle.Available in polished brass or chrome-plated.You will find deck fills with the engraved label "WASTE" for waste water and blackwatertanks corresponding to this design under similar products.
Fill fitting.Made of polished or chromed brass.For water or fuel.Cover with folding handle and molded writing. The cover is secured against loss with a stainless steel wire.With straight flange for the hose.
Simple PVC hose tail with cap and rubber cap seal. Hose connection for hoses with an internal diameter of 38 mm. Practical when a water connection is needed via a “loose” hose without a deck fitting.
Deck fill of A4 stainless steel (AISI 316), polished finish.The matching covers (sold separately) are available with various inscriptions and a foldable handle held captive with spring-loaded studs.In combination with screw sockets Article-No. 1998-100, the deck fill can also be used to empty holding tanks.Comes without cover and screw sockets. You can find these articles under accessories.
Elegant, lockable brass fuel filler neck. Complete with a wide, flattened-sided cap with integrated plastic lock and two keys. The lock is protected from sand and dirt by a hinged, engraved plate. In addition, there is a small spring-loaded plastic protective flap in the lock slot, which is pushed to the side when the key is inserted. The cover is secured to the filler neck with a thin wire rope to prevent it from being lost.Available in two sizes for fuel hoses with an internal diameter of 38 mm or 50 mm, optionally with a polished brass or chrome-plated brass finish.When locked, the cap can be turned without resistance. When unlocked, it snaps into place and the fuel cap can be removed by unscrewing it.
Universal key for deck plates.Stainless steel spring construction, of 5mm wire.For hole distance 20mm - 110mm.
For clear recognition of deck fills: Curved cast-brass sign with cleanly milled (very long lasting) lettering. Available for "WATER" or "DIESEL". Dimensions: L = 67 mm, B = 13 mm, Radius = approx. 50 mm.
Deck plate key, made of blue plastic.For deck plates octagon 11/16" (the same as standard winch handles).
Deck plate key made of chrome plated brass.For deck plates with two holes.Pin 6 mm, pin distance 26 mm.
Deck plate key, made of stainless steel.For deck plates octagon 11/16" (like standard winch handles).
Deck plate key made of brass.For deck plates with two holes.Pin 6 mm, pin distance 31 mm.
Universal deck plate spanner for deck fills.Functional plastic tool.Fits current covers. Slit clips: 32 x 3,5 mm und 38 x 4 mm.
Universal deck plate key. Functional plastic tool. Fits current slit, hex and two-hole covers. Measurements: - Two-hole: Pin 6mm, Distance 26mm. - Slit 23 x 3,5mm. - Hexagone 16mm.
High-quality plastic funnel with strainer.Particularly suited for filling fuel into a can, when the strainer stops unwanted contamination with dirt.Colour white.
A practical, traditional tank key for heavy deck fillers with a wide slot, as commonly found on many older traditional vessels, fishing boats, workboats, and classic yachts. The drive for insertion into the slot measures 5.5 mm in width and 40 mm in length. Elegantly manufactured from seawater-resistant bronze with a matt tumbled surface. The cross handle provides excellent torque transmission and allows the use of an extension bar when tightly fastened deck caps are difficult to loosen.Handle and shaft: Ø 14 mmHandle width: 85 mmHeight: 108 mmDrive: 40 × 5.5 mmNote: This key does not fit deck and tank fillers from the current TOPLICHT range.
