Electronic display instruments enable reliable, clear monitoring of the important operating data of a watercraft and provide an interface between the ship and skipper. Marine instruments for engine monitoring provide information on the operating status of the ship or boat engine. Individual engine displays provide information on engine temperatures, fuel, cooling water and oil levels, on-board voltage, engine speed, oil pressure and oil temperature. Displays for on-board monitoring and control displays provide information on the status of ...
- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
-
Electrics & engine
- Batteries & accessories
- Onboard monitoring
- Onboard power systems
- Cables & accessories
- Network & NMEA2000
- Battery chargers
- Inverters & voltage converters
- Wind chargers, solar panels & fuel cells
- Electric engines
- Engine control & push pull cables
- Engine cooling & exhaust system
- Accessories for engines
- Fuel system
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Display instruments
Reasonably priced RPM gauge (0-4000 U/min) with integrated hour meter from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.The rev counter can be connected to the terminal W or to a inductive rev transmitter.Circular instrument with a fitting diameter of 85mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced oil pressure gauge (0-5 bar) from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.Circular instrument with a fitting diameter of 52mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced water temperature gauge (40-120°) from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.Circular instrument with a fitting diameter of 52mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced tank gauge from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.Circular instrument with a fitting diameter of 52mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced rudder angle indicator (0-190 Ohm) from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.Circular instrument with a fitting diameter of 52mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced voltmeter (8-16V bzw. 18-32V) from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.Circular instrument with a fitting diameter of 52mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced oil temperature gauge (50-150°) from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.Circular instrument with a fitting diameter of 52mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced 4-way alarm display (volts, engine, temperature and oil) from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.Circular instrument with a fitting diameter of 52mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced tank gauge fresh water from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.Circular instrument with a fitting diameter of 52mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced tank gauge water from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20mm.Circular instrument with a fitting diameter of 52mm.The instrument is available with a dial in black with white characters or white with black characters.
Reasonably priced control display for the navigation lights from one of the worldwide leading instrument manufacturers.Waterproof up to 1 metre (IP67), with a curved glass cover, excellent anti-fog property and stainless steel ring.The lighting can be switched between orange-red and yellow, the operating voltage is 12 V or 24 V. Mounting is possible in a panel with a thickness of up to 20 mm.Circular instrument with a fitting diameter of 52 mm.The instrument is available with a dial in black with white characters.
Technically perfected marine instrument in the large installation dimension (D = 85) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. RPM gauge 4000 r/min with engine hour meter. The RPM gauge has to be connected to an inductive sensor or to the terminal W on the alternator.Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Klassische WEMA-Tankanzeige der Silverline-Reihe für Schmutzwasser mit NMEA2000 Anschluss im Standard-Einbaumaß (Durchmesser 52 mm). Hochwertige Edelstahlblende sowie Antibeschlag-Echtglaslinse. Das Display ist wasserdicht (nach IP67) und wird nachts von einer roten Hintergrundbeleuchtung illuminiert. Einfache Installation mit einem Montagering im Cockpit oder unter Deck. Die Stromversorgung findet über das NMEA-Kabel statt, es ist einen Meter lang.Hinweis: soll das Display mit einem WEMA-Tankgeber verbunden werden, muss auch dieser NMEA2000 fähig sein (siehe ähnliche Artikel unten).Technische Daten Außen-Durchmesser 56 mm/Einbaumaß 52 mmSpannung 12 VSchutzklasse IP67Daten-Verbindung: NMEA-Stecker
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Digital amperemeter kit with shunt (0,5-4,5 Ohm) included in the shipment, colour of the front ring: black or white. Shipment: instrument with mounting material, shunt and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Water tank gauge, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
GPS instruments with full digital display and individually adjustable units: Course, speed (in km/h, mph or kn) and stage distance (in km, M or NM). A high-quality 32-channel receiver in combination with a separate antenna ensures good reception even in problematic installation conditions.The instruments are a very good alternative to conventional speedometers, since no hull penetration is required and no fouling influences the display.The installation diameter (85 mm) corresponds to that of the classic instruments, a change to new technology is therefore possible without any problems.The illumination color is adjustable in red/orange or yellow.Delivery includes waterproof, separate GPS antenna (45 x 40 x 15 mm) with 4.80 m cable.For power supply 12 V.With the optional exchangeable front rings the design of the instruments can be adapted.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Fuel gauge, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically optimized marine instrument in the large installation dimension (D = 85) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Rudder angle indicator 40°-0°-40°, colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
The WEMA water level alarm gives you an acoustic warning when the water level rises above the normal level, e.g. in the bilge.The robust switch for the alarm is mounted in the bilge at a height where there is normally no water and connected to the buzzer included. If the water inside the sensor tube rises to 80 mm, the warning buzzer switches on.Jamming of the float by foreign objects is impossible due to the surrounding V4A tube. The switching unit can be easily pulled out of the holder and cleaned. The durable design also includes the encapsulated electronics and a 3 m long connection cable with a cable cross-section of 2 x 0.75mm².The switch can also be optionally connected to a signal lamp.The maximum load capacity is 0.3 amps at 12 volts and 0.15 amps at 24 volts.The water alarm is suitable for 12 and 24 volts.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Water temperature 40-120°, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Wastewater tank gauge, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Pressure range: 0-2 bar, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Digital hour meter, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Oil temperature 40-120°, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Analog voltmeter 8-16V, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Analog quartz clock, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Digital hour meter, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Rudder angle indicator 40°-0°-40°, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Engine trim gauge Up&Down, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Analog voltmeter 18-32 V, Colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Technically perfected marine instrument in the standard installation dimension (D = 52) at an attractive price.The design is customisable, since it is very easy to change the front ring with its bayonet lock. It is possible to mount the instrument in dashboards up to 20mm deep.The operating voltage can be 12V or 24V. Digital voltmeter 8-32 V, colour of the front ring: black or white. Shipment: instrument with mounting material and 40cm cables.
Tank gauge WATER for fresh water tanks.Works with tube indicator type TGW, 5 - 180 Ohm.Sturdy instrument with salt water resistant inox housing.Black plastic front ring.Black scale with white letters. Background light. Diameter 52 mm.
Tank gauge FUEL for fuel tanks.Works with tube indicator type TGT, 5 - 180 Ohm.Sturdy instrument with salt water resistant inox housing.Black plastic front ring.Black scale with white letters. Background light. Body diameter 52 mm.
Non-contact tank level gauge. For water, grey water, and waste tanks.The use of ultrasonic technology means that there are no moving parts required in the tank.Work perfectly in plastic tanks. Not suitable for metal tanks.High quality gauges with sea water proof stainless steel housing and a front ring of black plastic.Black dial with while lettering and background lighting. Instrument diameter: 52 mm.The matching gauges are listed below (check "Suitable items"):
Analog round gauge from the TUROTEST series for displaying the fill level of water tanks. Compatible with TGW series tank sensors for water. The gauge has a diameter of 52 mm and is designed for 12-volt DC. The series resistance Rturo is required for operation at 24 volts DC.The seawater-resistant stainless steel housing features a front ring made of chrome-plated brass. The black dial features white numerals and is backlit.FeaturesFor TGW Series tank level sensorsInstrument diameter 52 mmSeawater-resistant stainless steel housingChrome-plated brass front ringBlack dial with white numeralsBacklightTechnical SpecificationsOperating voltage: 12 V DC24 V operation with additional series resistor RturoDiameter: 52 mm
Extremely versatile multifunctional circular instrument from the Swiss quality supplier Veratron (formerly VDO). Can display one or two pieces of boat data each on five scrollable screens with digits, icons and bar charts. A total of up to 30 digital data from the on-board system (e.g. speed, course, engine speed, tank levels, depth, cooling water temperature) can be processed.You can scroll by touching the glass display. The screens and desired data are simply selected and configured via the app. The device can process data from the NMEA 2000 network and also has two analog sensor inputs (resistance 0-400 Ohm and 0-1500 Ohm).On delivery, the VMH Flex is suitable for all measured values listed in the technical data below and is simply programmed once for the desired function on board using the Veratron smartphone app (Android or Apple). This works via the NFC function (Near Field Communication) of your own smartphone. The device does not even need to be connected to the on-board power supply. Simply hold your smartphone to the back of the display, start the app and make the settings. The app can also be used to enter units, tank numbers or desired alarm thresholds.Operation via 2 softkeys. Integrated GPS chip, 12 or 24 V, 4 analog inputs. As the main device, the device can supply up to 14 smaller VMH 14 slave displays with data. NMEA 2000 connection.Mineral glass with brushed stainless steel bezel, waterproof to IPX7 (min. 30 minutes 1 m under water), therefore also suitable for the cockpit. The 1.44 inch TFT display, 14 programmable alarmsTechnical dataOperating voltage 12/24 VPower consumption 65mAScreen: 1.44 inch TFT display, 125x125 pixelsInstallation dimensions: 52mm hole, depth: 45 mmConnection: Tyco / Hirschmann MQS connector 8 pin / Micro-C M12 5PinDigital ports: NMEA 2000, LIN busAnalog inputs: 2x resistorWaterproof according to IPx7Wireless interface: AirWave (NFC)Supported data: Battery (volt-ampere meter), RPM, engine operating hours, SOG, COG, depth, trim, engine coolant, boost pressure, engine oil temperature and pressure, transmission oil temperature and pressure, fuel level, fresh water level, holding tank level, rudder position, time, exhaust gas temperature,
VDO-VIEWLINE tank gauge for fuel tanks.Different gauges to be used with either lever sensor or tubular sensor.A perfect instrument series from this German company with over 50 years of experience in the marine industry.VDO-VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal pursuant to IP67 in the front, curved double window of scratch-proof plastic prevents fogging.Dials with backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment. Standard version with black dial and black round front ring. Instrument diameter 52 mm.Operating with power supply 8 - 32 Volt. Dial and front ring: black.. Tank sensors must be ordered separately (check "Suitable items").
VDO VIEWLINE oil-pressure gauge.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal, pursuant to IP67, in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box. Instrument diameters 52 mm. Operating power supply 8-32 V. Dial and front ring: black.. Accessories: warning point controller.
VDO-VIEWLINE voltmeter.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal pursuant to IP67 in the front, convex double window of scratch-proof plastic prevents fogging. Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box. Instrument diameters 52 mm. Operating power supply 8-16 or 18-32 Volts. Dial and front ring: black.. Accessories: warning point controller.
VDO-VIEWLINE thermometer. VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal pursuant to IP67 in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box. Instrument diameters 52 mm. Operating power supply 8-32 V. Dial and front ring: black.. Accessories: warning point controller.
VDO-VIEWLINE ammeter.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal, pursuant to IP67, in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box (ammeter including shunt). Instrument diameters 52 mm. Operating power supply 8-32 V. Dial and front ring: black.. Accessories: warning point controller.
VDO-VIEWLINE rudder angle gauge.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal pursuant to IP67 in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment. Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box.Instrument diameters 52 mm. Operating power supply 10-32 V. Dial and front ring: black.
The VDO VIEWLINE hour meter voltmeter alternately displays the engine operating hours and the battery voltage every 10 seconds.VDO VIEWLINE offers state-of-the-art technology, the highest quality workmanship and technical perfection. The front section of the instruments is waterproof to IP67. The curved double glass made of scratch-resistant plastic prevents fogging from the inside. The LED illumination ensures good readability at night.Specifications:Operating voltage 9-48 VDCPower consumption <50 mAPolarity reversal protectionLoad dump protectionOperating temperature - 40°C + 80°CStorage temperature - 40°C + 85°C°Connection via 8-pin MQS connectorProtection class IP67 at the front and IP52 at the back.Design: black dial with round black front ring.Scope of delivery: display unit and mounting material in carton.
VDO-VIEWLINE quartz clock.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal, pursuant to IP67, in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box. Instrument diameters 52 mm. Dial and front ring: black.. For power 12 V or 24 V. Dial and front ring: black..
VDO-VIEWLINE tachometer gauge provides information engines RPM.Large instrument with white analogue pointer and digital operating hours display.Modern, clear black dial, watertight seal, pursuant to IP67 in the front, curved double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring.Instrument comes complete with wiring sets, configuration switch and attachement material.Instrument diameters 85 mm.Operating power supply 8-32 Volt.
Resistor (in series) for VDO-VIEWLINE or KIENZLE Classic instruments.Required to use the instruments in a 24 volt system.
VDO-VIEWLINE tank gauge for fresh water tanks.This gauge may only be used with a capacitive sensor.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO-VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, watertight seal, pursuant to IP67 in the front, curved double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Instrument diameters 52 mm.Operating power supply 8-32 Volt. Dial and front ring: black.Capacitive sensor must be ordered separately, please check "Suitable items".
VDO-VIEWLINE capacitive tank gauge for waste water / black water tanks. This gauge may be used only with the capacitive tank sensor, with no moving parts.A perfect instrument series from this German company with over 50 years of experience in the marine industry.VDO-VIEWLINE offers modern technology, high product quality, and technical perfection: modern, clear dial design, watertight seal, pursuant to IP67, in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Comes with red warning LED.8-pin MQS plug for attachment.Black dial and black round front ring. Instrument diameters 52 mm.Operating power supply 8-32 Volt. Dial and front ring: black.The capacitive sensor must be ordered separately at "Suitable items".
Multifunctional speedometer gauge with integrated GPS receiver.The speed and COG are measured by the GPS receiver (with built-in antenna)without the need for an additional throuhg hull sensor. The digital display indicates course over ground, distance made good, a trip odometer or time.Units available for speed are kn, km/h or mph. A speed alarm can be set.The diameter of the instrument is 110 mm.
The VDO-VIEWLINE trim gauge provides information about the position of the engine or trim flaps in relation to the boat's stern.In this way the skipper always knows whether the flaps are in the raised or lowered position. Thereby he can optimise the boat's trim. Compatible with an 8 pole Tyco / Hirschmann MQS plug. With an angle degree accuracy over the entire display range of + / - 3.6°.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO-VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, watertight seal, pursuant to IP67 in the front, curved double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Instrument diameters 52 mm.Operating power supply 8-32 Volt. Dial and front ring: black.
Attractive, very versatile digital round instrument from the Swiss quality supplier Veratron (formerly VDO), which can display up to 30 digital data sets from the on-board system. Both NMEA 2000 data and analog measured values can be used. TFT display made of mineral glass with brushed stainless steel bezel, waterproof to IPX7, therefore also suitable for the cockpit.Speed, heading, course, rpm, tank levels, depth, etc. can be displayed on 20 screen surfaces. It is also possible to set alarm thresholds, for example for engine monitoring or depth. A total of 10 via warning icons (e.g. fuel/water tank level, cooling water temperature, oil pressure, oil level, battery voltage, GPS signal loss).Operation via two softkeys, which is easy even when wearing gloves. A GPS chip is integrated in the device, which calculates speed and course. It has an NMEA 2000 input as well as four additional analog inputs, two frequency inputs (engine rpm, logger) and two resistance inputs. The VMH 35 can also be used as the main unit for controlling up to 14 VMH 14 daughter displays via the Veratron EasyLink standard.The menu can be used to set whether the speed should be displayed up to 3000 or 4000 revolutions.Technical dataAnalog inputs: 2x resistance/2X frequencyDigital inputs: 1x NMEA 2000, 1x SAE J193912/24 Volt (9-32 V)Position: GPS, GLONASS, GallileoDiameter: Outside 100mmMounting hole: 85 mmDisplay 1.44 inch TFTEasy-Link output for VMH 16The 100mm display 12 or 24 V, 4 analog inputs. As a main device, the device can supply up to 14 smaller VMH 14 daughter displays with data wirelessly.Power consumption ≤ 170 mA/12V
Daughter display for the main display VMH 35-D from the Swiss quality manufacturer Veratron (formerly VDO). A VMH 35-D must be installed for the VMH 14 to function; it does not work as a stand-alone solution. The compact 56 mm display made of mineral glass with a brushed stainless steel frame can display one of the following 8 measured values: Fuel level, trim, battery voltage, cooling water temperature, oil temperature and oil pressure in the engine or gearbox. The power supply and the necessary measurement data are provided via the VMH 35 main display.The measured values are shown via a round graphic display as well as icons and digits. Alarm thresholds can be set; when these are reached, the values and graphics on the display start to flash.The VMH 14 is suitable for all of the above data on delivery and is simply programmed once for the desired function on board using the Veratron smartphone app (Android or Apple). This works via the NFC function (near field communication) of your own smartphone. The device does not even need to be connected to the on-board power supply. Simply hold your smartphone to the back of the display, start the app and make the settings. The app can also be used to enter units, tank numbers or desired alarm thresholds.Up to 16 additional VMH 14s can be connected to one VMH 35-D. The display is suitable for the cockpit and is waterproof to protection class IPX 7 (30 minutes in 1 m of water). A 52 mm hole in the bulkhead/instrument carrier is required for mounting the display.The scope of delivery includes display, mounting plastic nut, wiring harness and rubber seal.Technical data VMH 14Operating voltage : 12/24 V via main displayPower consumption: ≤ 15 mA/12Display: Optically bonded IBN segment display. Mineral glass.Diameter: 56 mm (display), 52 mm (mounting hole)Installation depth: 40 mmPlug/connection: AMP SuperSeal 1.5 Male: 282105-1 / Female: 282087-1Operating temperature: -20°C to + 60 °C
The electronic rudder indicator by KOBELT will display the realtime position of the rudder on a tri-coloured 52 mm display. Both the master and repeater have a backlit translucent display. Operating voltage 12 V/24 V (illumination 12 V, may be changed to 24 V on request). Approx. weight: 0.25 kg. Whether you are manoeuvring, power steering or changing course, an accurate readout of the rudder position will be displayed. Up to five additional repeater stations (KOBELT 7180-S) may be connected with the master instrument 7180-M.The master may also be connected with the bigger KOBELT 7175-SY slave - or vice versa.We recommend to use the optional KOBELT feedback unit 7168 or 7174 (check "Suitable items").
Sturdy feedback unit KOBELT 7168, e.g. for the electronic rudder indicators KOBELT 7175 or 7180. This feedback unit is used to transmit rudder angle positions to a rudder angle indicator,an autopilot or to electronic steering components. Its compact design and watertight construction will allow it to be installed in tight quarters. With its all bronze and stainless steel construction it is well suitable for operation in rough environment. Comes as: 7168-P: 1 potentiometer to transmit data to one device (e.g. rudder indicator) 7168-PP: 2 potis to transmit data to two devices (e.g. rudder indicator and autopilot). Standard potentiometer is 1 kOhm.Operating voltage 12 V / 24 V.Weight: 1 kg.Comes with connection rod 250 mm with ball joint terminals.
The large electronic KOBELT rudder indicator 7175 M, with 80 mm visible display.The rudder indicator system will continuously monitor and indicate the position of your rudder in realtime.It has a tricolour backlit translucent display. Operating voltage 12V/24V (illumination 12V, may be changed to 24V on request). Whether you are manoeuvring, power steering or changing course, an accurate readout of the rudder position will be displayed on a tricoloured three-inch display (visible 80 mm). Body diameter 85 mm.Up to five additional repeater stations 7175-S may be connected to the master instrument 7175-MY.Also the smaller repeaters 7180-S may be connected to the master - or vice versa. We recommend to use the optional KOBELT feedback unit 7168 or 7174 (check "Suitable items").
Sturdy feedback unit KOBELT 7174, e.g. for the electronic rudder indicators KOBELT 7175 or 7180. Made of bronze and stainless steel, it will withstand vibration and corrosion for years.This feedback unit has two microswitches and may be used if a switch function at max. rudder position is required. The unit also feeds back the rudder angle position to the rudder angle indicator or to the autopilot or Full Follow Up control systems.Available versions: 7174-AD: 2 microswitches, 1 poti to transmit data to one device (e.g. rudder indicator), to be calibrated with 1 trimpot. 7174-B: 2 microswitches, 2 potis to transmit data to two devices (e.g. rudder indicator and autopilot). Standard potentiometer is 1 kOhm.Operating voltage 12 V/24 V.Weight: 3,4 kg.
Rudder-angle meter (Label: "Rudderangle") from the MMB RETRO instrument series. The MMB RETRO marine instruments are designed for the retro look of the 1930s. This series combines modern technology from a quality German manufacturer with traditional design.The housing (of galvanized and then chromed steel) and the front ring (of brass) will not corrode. The dial is aluminum coated, the glass window is shatter-proof.With back-lighting.Only for 12V electrical systems.Compatable with VDO generator sensors. Installation diameter = 60 mm. Designs: Gilded brass front ring with ivory dial or chromed brass front ring with white dial.
Hour meter (Label: "Hourmeter") from the KIENZLE CLASSIC instrument series. The MMB RETRO Marine Instruments are designed for the retro look of the 1930s. This series combines modern technology from a quality German manufacturer with traditional design.The housing (of galvanized and then chrome plated steel) and the front ring (of brass) will not corrode. The dial is aluminum coated, the glass window is shatter-proof.With back-lighting.Only for 12V electrical systems.Compatable with VDO generator sensors. Installation diameter = 60 mm. Designs: Gold plated brass front ring with ivory coloured dial.
Oil pressure indicator with the label "oil pressure".Classic instrument series in retro design of the 1930s, combined with modern technology from high quality manufacturing. Made in Germany.Technical data:Housing made of galvanized steel, galvanically chromated,corrosion-resistant front ring, brass gold-plated or chrome-plated,aluminum coated dial in white or ivory,black metal pointer,cover glass of construction glass, anti-fog treated,operating voltage 12 volts,operating temperature -20°C to + 70°C,protection class IP 65 at the front when installed,transmitter/sensor technology: VDO compatible,Installation diameter 60 mm.
Ammeter (inscription "Amperemeter") from the MMB marine instrument series in the retro design of the 1930s. This series of instruments combines modern technology from high-quality manufacturing, made in Germany, with traditional design.Housing (made of galvanized and then chromated steel) and the front rings (made of brass) are corrosion-free, dial aluminium-coated, cover glass with anti-fog coating. Protection class (built-in): IP65.With backlight. Supplied complete with shunt.Operating voltage 12 volts only. Encoder/sensor VDO-compatible, installation diameter = 60 mm. Versions: Gold-plated brass front ring with ivory-colored dial.
Trim indicators from the MMB Marine Instruments RETRO series in the Retro design of the 30s. This series of instruments combines modern technology from high-quality manufacturing, made in Germany, with traditional design.The housing (made of galvanized and then chromated steel) and the front rings (made of brass) are corrosion-free, Dial aluminum-coated, cover glass with anti-fog coating.With backlight.Operating voltage 12 volts only.Encoder/sensor VDO-compatible, installation diameter = 60 mm.Finishes: Chrome-plated brass front ring with white dial.
