Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Extremely versatile multifunctional circular instrument from the Swiss quality supplier Veratron (formerly VDO). Can display one or two pieces of boat data each on five scrollable screens with digits, icons and bar charts. A total of up to 30 digital data from the on-board system (e.g. speed, course, engine speed, tank levels, depth, cooling water temperature) can be processed.

You can scroll by touching the glass display. The screens and desired data are simply selected and configured via the app. The device can process data from the NMEA 2000 network and also has two analog sensor inputs (resistance 0-400 Ohm and 0-1500 Ohm).

On delivery, the VMH Flex is suitable for all measured values listed in the technical data below and is simply programmed once for the desired function on board using the Veratron smartphone app (Android or Apple). This works via the NFC function (Near Field Communication) of your own smartphone. The device does not even need to be connected to the on-board power supply. Simply hold your smartphone to the back of the display, start the app and make the settings. The app can also be used to enter units, tank numbers or desired alarm thresholds.

Operation via 2 softkeys. Integrated GPS chip, 12 or 24 V, 4 analog inputs. As the main device, the device can supply up to 14 smaller VMH 14 slave displays with data. NMEA 2000 connection.

Mineral glass with brushed stainless steel bezel, waterproof to IPX7 (min. 30 minutes 1 m under water), therefore also suitable for the cockpit. The 1.44 inch TFT display, 14 programmable alarms


Technical data

  • Operating voltage 12/24 V
  • Power consumption 65mA
  • Screen: 1.44 inch TFT display, 125x125 pixels
  • Installation dimensions: 52mm hole, depth: 45 mm
  • Connection: Tyco / Hirschmann MQS connector 8 pin / Micro-C M12 5Pin
  • Digital ports: NMEA 2000, LIN bus
  • Analog inputs: 2x resistor
  • Waterproof according to IPx7
  • Wireless interface: AirWave (NFC)
  • Supported data: Battery (volt-ampere meter), RPM, engine operating hours, SOG, COG, depth, trim, engine coolant, boost pressure, engine oil temperature and pressure, transmission oil temperature and pressure, fuel level, fresh water level, holding tank level, rudder position, time, exhaust gas temperature,




more information

€146.91*

Prices incl. VAT plus shipping costs

net: €123.45
Art. No.: 3491-304

In stock

The item is in stock ready for shipping. The delivery time is approx. 1 to 3 working days.
Stk

Description

Extremely versatile multifunctional circular instrument from the Swiss quality supplier Veratron (formerly VDO). Can display one or two pieces of boat data each on five scrollable screens with digits, icons and bar charts. A total of up to 30 digital data from the on-board system (e.g. speed, course, engine speed, tank levels, depth, cooling water temperature) can be processed.

You can scroll by touching the glass display. The screens and desired data are simply selected and configured via the app. The device can process data from the NMEA 2000 network and also has two analog sensor inputs (resistance 0-400 Ohm and 0-1500 Ohm).

On delivery, the VMH Flex is suitable for all measured values listed in the technical data below and is simply programmed once for the desired function on board using the Veratron smartphone app (Android or Apple). This works via the NFC function (Near Field Communication) of your own smartphone. The device does not even need to be connected to the on-board power supply. Simply hold your smartphone to the back of the display, start the app and make the settings. The app can also be used to enter units, tank numbers or desired alarm thresholds.

Operation via 2 softkeys. Integrated GPS chip, 12 or 24 V, 4 analog inputs. As the main device, the device can supply up to 14 smaller VMH 14 slave displays with data. NMEA 2000 connection.

Mineral glass with brushed stainless steel bezel, waterproof to IPX7 (min. 30 minutes 1 m under water), therefore also suitable for the cockpit. The 1.44 inch TFT display, 14 programmable alarms


Technical data

  • Operating voltage 12/24 V
  • Power consumption 65mA
  • Screen: 1.44 inch TFT display, 125x125 pixels
  • Installation dimensions: 52mm hole, depth: 45 mm
  • Connection: Tyco / Hirschmann MQS connector 8 pin / Micro-C M12 5Pin
  • Digital ports: NMEA 2000, LIN bus
  • Analog inputs: 2x resistor
  • Waterproof according to IPx7
  • Wireless interface: AirWave (NFC)
  • Supported data: Battery (volt-ampere meter), RPM, engine operating hours, SOG, COG, depth, trim, engine coolant, boost pressure, engine oil temperature and pressure, transmission oil temperature and pressure, fuel level, fresh water level, holding tank level, rudder position, time, exhaust gas temperature,




Downloads

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
VERATRON VMH 14 multifunction display
VERATRON VMH 14 multifunction display
Daughter display for the main display VMH 35-D from the Swiss quality manufacturer Veratron (formerly VDO). A VMH 35-D must be installed for the VMH 14 to function; it does not work as a stand-alone solution. The compact 56 mm display made of mineral glass with a brushed stainless steel frame can display one of the following 8 measured values: Fuel level, trim, battery voltage, cooling water temperature, oil temperature and oil pressure in the engine or gearbox. The power supply and the necessary measurement data are provided via the VMH 35 main display.The measured values are shown via a round graphic display as well as icons and digits. Alarm thresholds can be set; when these are reached, the values and graphics on the display start to flash.The VMH 14 is suitable for all of the above data on delivery and is simply programmed once for the desired function on board using the Veratron smartphone app (Android or Apple). This works via the NFC function (near field communication) of your own smartphone. The device does not even need to be connected to the on-board power supply. Simply hold your smartphone to the back of the display, start the app and make the settings. The app can also be used to enter units, tank numbers or desired alarm thresholds.Up to 16 additional VMH 14s can be connected to one VMH 35-D. The display is suitable for the cockpit and is waterproof to protection class IPX 7 (30 minutes in 1 m of water). A 52 mm hole in the bulkhead/instrument carrier is required for mounting the display.The scope of delivery includes display, mounting plastic nut, wiring harness and rubber seal.Technical data VMH 14Operating voltage : 12/24 V via main displayPower consumption: ≤ 15 mA/12Display: Optically bonded IBN segment display. Mineral glass.Diameter: 56 mm (display), 52 mm (mounting hole)Installation depth: 40 mmPlug/connection: AMP SuperSeal 1.5 Male: 282105-1 / Female: 282087-1Operating temperature: -20°C to + 60 °C

€71.90 *
Details

More Products from Category VERATRON

Amperemeter VDO VIEWLINE
Amperemeter VDO VIEWLINE
VDO-VIEWLINE ammeter.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal, pursuant to IP67, in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box (ammeter including shunt). Instrument diameters 52 mm. Operating power supply 8-32 V. Dial and front ring: black.. Accessories: warning point controller.

€139.00 *
Details
GPS speedometer VDO VIEWLINE
GPS speedometer VDO VIEWLINE
Multifunctional speedometer gauge with integrated GPS receiver.The speed and COG are measured by the GPS receiver (with built-in antenna)without the need for an additional throuhg hull sensor. The digital display indicates course over ground, distance made good, a trip odometer or time.Units available for speed are kn, km/h or mph. A speed alarm can be set.The diameter of the instrument is 110 mm.

€229.00 *
Details
Oil pressure gauge black VDO VIEWLINE
Oil pressure gauge black VDO VIEWLINE
VDO VIEWLINE oil-pressure gauge.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal, pursuant to IP67, in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box. Instrument diameters 52 mm. Operating power supply 8-32 V. Dial and front ring: black.. Accessories: warning point controller.

From €65.90 *
Details
Quartz clock VDO VIEWLINE
Quartz clock VDO VIEWLINE
VDO-VIEWLINE quartz clock.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal, pursuant to IP67, in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box. Instrument diameters 52 mm. Dial and front ring: black.. For power 12 V or 24 V. Dial and front ring: black..

From €119.90 *
Details
Resistor for 24V for VDO VIEWLINE /KIENZLE Classic
Resistor for 24V for VDO VIEWLINE /KIENZLE Classic
Resistor (in series) for VDO-VIEWLINE or KIENZLE Classic instruments.Required to use the instruments in a 24 volt system.

€19.90 *
Details
Rudder angle indicator 10-32V VDO VIEWLINE
Rudder angle indicator 10-32V VDO VIEWLINE
VDO-VIEWLINE rudder angle gauge.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal pursuant to IP67 in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment. Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box.Instrument diameters 52 mm. Operating power supply 10-32 V. Dial and front ring: black.

€65.90 *
Details
Tachometer VDO VIEWLINE
Tachometer VDO VIEWLINE
VDO-VIEWLINE tachometer gauge provides information engines RPM.Large instrument with white analogue pointer and digital operating hours display.Modern, clear black dial, watertight seal, pursuant to IP67 in the front, curved double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring.Instrument comes complete with wiring sets, configuration switch and attachement material.Instrument diameters 85 mm.Operating power supply 8-32 Volt.

From €179.90 *
Details
Tank gauge blackwater capacitive VDO VIEWLINE
Tank gauge blackwater capacitive VDO VIEWLINE
VDO-VIEWLINE capacitive tank gauge for waste water / black water tanks. This gauge may be used only with the capacitive tank sensor, with no moving parts.A perfect instrument series from this German company with over 50 years of experience in the marine industry.VDO-VIEWLINE offers modern technology, high product quality, and technical perfection: modern, clear dial design, watertight seal, pursuant to IP67, in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Comes with red warning LED.8-pin MQS plug for attachment.Black dial and black round front ring. Instrument diameters 52 mm.Operating power supply 8-32 Volt. Dial and front ring: black.The capacitive sensor must be ordered separately at "Suitable items".

€65.90 *
Details
Tank gauge fuel VDO VIEWLINE
Tank gauge fuel VDO VIEWLINE
VDO-VIEWLINE tank gauge for fuel tanks.Different gauges to be used with either lever sensor or tubular sensor.A perfect instrument series from this German company with over 50 years of experience in the marine industry.VDO-VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal pursuant to IP67 in the front, curved double window of scratch-proof plastic prevents fogging.Dials with backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment. Standard version with black dial and black round front ring. Instrument diameter 52 mm.Operating with power supply 8 - 32 Volt. Dial and front ring: black.. Tank sensors must be ordered separately (check "Suitable items").

From €65.90 *
Details
Tank gauge water capacitive VDO VIEWLINE
Tank gauge water capacitive VDO VIEWLINE
VDO-VIEWLINE tank gauge for fresh water tanks.This gauge may only be used with a capacitive sensor.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO-VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, watertight seal, pursuant to IP67 in the front, curved double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Instrument diameters 52 mm.Operating power supply 8-32 Volt. Dial and front ring: black.Capacitive sensor must be ordered separately, please check "Suitable items".

€65.90 *
Details
Thermometer black VDO-VIEWLINE
Thermometer black VDO-VIEWLINE
VDO-VIEWLINE thermometer. VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal pursuant to IP67 in the front, convex double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box. Instrument diameters 52 mm. Operating power supply 8-32 V. Dial and front ring: black.. Accessories: warning point controller.

From €65.90 *
Details
Trim indicator VDO-VIEWLINE
Trim indicator VDO-VIEWLINE
The VDO-VIEWLINE trim gauge provides information about the position of the engine or trim flaps in relation to the boat's stern.In this way the skipper always knows whether the flaps are in the raised or lowered position. Thereby he can optimise the boat's trim. Compatible with an 8 pole Tyco / Hirschmann MQS plug. With an angle degree accuracy over the entire display range of + / - 3.6°.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO-VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, watertight seal, pursuant to IP67 in the front, curved double window of scratch-proof plastic prevents fogging.Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Instrument diameters 52 mm.Operating power supply 8-32 Volt. Dial and front ring: black.

€65.90 *
Details
VDO VIEWLINE Hour meter/Voltmeter
VDO VIEWLINE Hour meter/Voltmeter
The VDO VIEWLINE hour meter voltmeter alternately displays the engine operating hours and the battery voltage every 10 seconds.VDO VIEWLINE offers state-of-the-art technology, the highest quality workmanship and technical perfection. The front section of the instruments is waterproof to IP67. The curved double glass made of scratch-resistant plastic prevents fogging from the inside. The LED illumination ensures good readability at night.Specifications:Operating voltage 9-48 VDCPower consumption <50 mAPolarity reversal protectionLoad dump protectionOperating temperature - 40°C + 80°CStorage temperature - 40°C + 85°C°Connection via 8-pin MQS connectorProtection class IP67 at the front and IP52 at the back.Design: black dial with round black front ring.Scope of delivery: display unit and mounting material in carton.

€65.90 *
Details
VERATRON VIEWLINE FLEX Multifunction instrument
VERATRON VIEWLINE FLEX Multifunction instrument
Freely configurable (via smartphone app) display instrument. The 1.44-inch TFT color display is sun-readable and supports a variety of configurations, such as tachometer, speed or fill level values. Two values can be displayed simultaneously. Analog inputs enable data reception (resistance or frequency value) directly from the encoder. Alternatively, the data can be fed into the NMEA 2000 network or data can be read in from this network. In addition, the app can be used to set individual warning thresholds for each value, which are indicated by visual and acoustic signals. Operating voltage 8-32 volts. Protection class IP67. Analog input: Resistive (0-400 Ohm), frequency (W, Ind., Hall, generator).All supported configurations can be found in the data sheet under "Downloads & Information".

€129.90 *
Details
VERATRON VMH 14 multifunction display
VERATRON VMH 14 multifunction display
Daughter display for the main display VMH 35-D from the Swiss quality manufacturer Veratron (formerly VDO). A VMH 35-D must be installed for the VMH 14 to function; it does not work as a stand-alone solution. The compact 56 mm display made of mineral glass with a brushed stainless steel frame can display one of the following 8 measured values: Fuel level, trim, battery voltage, cooling water temperature, oil temperature and oil pressure in the engine or gearbox. The power supply and the necessary measurement data are provided via the VMH 35 main display.The measured values are shown via a round graphic display as well as icons and digits. Alarm thresholds can be set; when these are reached, the values and graphics on the display start to flash.The VMH 14 is suitable for all of the above data on delivery and is simply programmed once for the desired function on board using the Veratron smartphone app (Android or Apple). This works via the NFC function (near field communication) of your own smartphone. The device does not even need to be connected to the on-board power supply. Simply hold your smartphone to the back of the display, start the app and make the settings. The app can also be used to enter units, tank numbers or desired alarm thresholds.Up to 16 additional VMH 14s can be connected to one VMH 35-D. The display is suitable for the cockpit and is waterproof to protection class IPX 7 (30 minutes in 1 m of water). A 52 mm hole in the bulkhead/instrument carrier is required for mounting the display.The scope of delivery includes display, mounting plastic nut, wiring harness and rubber seal.Technical data VMH 14Operating voltage : 12/24 V via main displayPower consumption: ≤ 15 mA/12Display: Optically bonded IBN segment display. Mineral glass.Diameter: 56 mm (display), 52 mm (mounting hole)Installation depth: 40 mmPlug/connection: AMP SuperSeal 1.5 Male: 282105-1 / Female: 282087-1Operating temperature: -20°C to + 60 °C

€71.90 *
Details
VERATRON VMH 35 D multifunction display
VERATRON VMH 35 D multifunction display
Attractive, very versatile digital round instrument from the Swiss quality supplier Veratron (formerly VDO), which can display up to 30 digital data sets from the on-board system. Both NMEA 2000 data and analog measured values can be used. TFT display made of mineral glass with brushed stainless steel bezel, waterproof to IPX7, therefore also suitable for the cockpit.Speed, heading, course, rpm, tank levels, depth, etc. can be displayed on 20 screen surfaces. It is also possible to set alarm thresholds, for example for engine monitoring or depth. A total of 10 via warning icons (e.g. fuel/water tank level, cooling water temperature, oil pressure, oil level, battery voltage, GPS signal loss).Operation via two softkeys, which is easy even when wearing gloves. A GPS chip is integrated in the device, which calculates speed and course. It has an NMEA 2000 input as well as four additional analog inputs, two frequency inputs (engine rpm, logger) and two resistance inputs. The VMH 35 can also be used as the main unit for controlling up to 14 VMH 14 daughter displays via the Veratron EasyLink standard.The menu can be used to set whether the speed should be displayed up to 3000 or 4000 revolutions.Technical dataAnalog inputs: 2x resistance/2X frequencyDigital inputs: 1x NMEA 2000, 1x SAE J193912/24 Volt (9-32 V)Position: GPS, GLONASS, GallileoDiameter: Outside 100mmMounting hole: 85 mmDisplay 1.44 inch TFTEasy-Link output for VMH 16The 100mm display 12 or 24 V, 4 analog inputs. As a main device, the device can supply up to 14 smaller VMH 14 daughter displays with data wirelessly.Power consumption ≤ 170 mA/12V

€349.90 *
Details
Voltmeter VDO VIEWLINE
Voltmeter VDO VIEWLINE
VDO-VIEWLINE voltmeter.VIEWLINE is an instrument series from the German company VDO, with over 50 years of experience in the marine industry.VDO VIEWLINE offers modern technology, high processing quality, and technical perfection: modern, clear dial design, a variety of installations (flush mounting is also possible), watertight seal pursuant to IP67 in the front, convex double window of scratch-proof plastic prevents fogging. Dials and hands use backlight-technology - clear to read, even at night, thanks to LED lighting.Most instruments are also equipped with a red warning LED.8-pin MQS plug for attachment.Standard equipment includes a black dial and black round front ring. Included: display unit and installation material in a box. Instrument diameters 52 mm. Operating power supply 8-16 or 18-32 Volts. Dial and front ring: black.. Accessories: warning point controller.

From €62.95 *
Details

Last seen products