A great alternative for classic wood oil systems suited especially for resinous tropical wood types and American pine. This high-gloss, one-component clear varnish with UV filter adheres very well to sanded, oil-containing wood types such as teak or iroco.With a layer build of less than five coats, the varnish oil still remains breathable. With more layers of varnish, the wood closes completely. Applicable for coating solid and plywood indoors and outdoors above the waterline, as well as for reworking existing one- and two-component varnish systems.Thinner: EPIFANES Paint Thinner, EPIFANES 1K Spray ThinnerYield approx. 12m²/l.
A one-component varnish that provides optimal protection in all climate conditions. EPIFANES Rapidclear gives a high-quality satin finish for long-term protection and care of all maritime woods, both inside and outside above the waterline.The paint is based on a modified alkyd-urethane resin. It adheres extremely well to teak and other oily woods, is very water-repellent, very breathable and flexible. It provides a lightly pigmented UV-protection finish, protects against discoloration and supports the natural wood grain. On weathered surfaces, RAPIDCLEAR can restore a uniform appearance. With its quick drying, grain filling properties, it is suitable for fast and easy build-up of varnish without sanding needed between layers. This makes it a great base coating for the final application with EPIFANES Clear Gloss Varnish or EPIFANES Woodfinish Gloss. Can be applied on existing one- and two-component varnishes as well. EPIFANES Rapidclear is for those who want the best in a quick and easy satin finish system with maximum UV resistance and durability.Suitable Thinner: EPIFANES Brush Thinner for Paint and Varnish, EPIFANES 1-K spray thinner Coverage: ca. 13m²/l
Clear varnish oil with satin finish and UV filter especially suitable for teak and other oily woods. A one-component, breathable finish for interior and exterior use based on urethane/alkyd resin and tung oil.The varnish oil has excellent flow properties and is suitable as a matte finish over EPIFANES Woodfinish Gloss as well as other clear varnish systems. Suitable thinner: EPIFANES Paint ThinnerYield: approx. 13 m²/l.
Fast-drying, silk matt varnish with good weather resistance and UV protection.Adheres well to teak and other oily woods and protects against discoloration due to its brownish pigmentation.On weathered surfaces, EPIFANES Rapidcoat can restore a uniform appearance.Suitable for filling and priming wood in preparation for e.g. EPIFANES Clear Varnish or EPIFANES Woodfinish-Gloss. Can also be used for overcoating existing one-component clearcoats and can also be overcoated with all one-component lacquers. Use indoors and outdoors above the waterline.Thinner: EPIFANES Brush Thinner for Paint and VarnishYield approx. 13m²/l.
Matte-drying, deeply penetrating impregnation oil that prevents graying and contamination of teak woods for months. Based on alkyd resin and linseed oil. Can be easily applied with a wide brush or cloth until the wood is saturated.Suited for Maintenancse of exterior teak such as bar decks, rub rails, gratings and jetty planks. Attention: due to the possible risk of self ignation, keep the used cloth soaked in water.Coverage: approx. 9 m.sq./l.
Water-based cleaner for teak and other tropical hardwoods. Cleans and brightens weathered and dirty wood surfaces. Renews original color tone without attacking deck caulking sealant.Can be applied quickly and easily, suitable for both salt and fresh water areas. Ideal for preparing the wood for further treatment with EPIFANES Teak-O-Bello Teak Protector.Coverage: ca. 7 qm/l.
Deep-penetrating, solvent-free, water-based teak protectant.TEAK-O-BELLO offers long-holding protection for teak and other hardwoods preventing it from weathering and graying for an extended period of time. It's water-based, environmentally friendly formulation lasts longer than solvent-based teak oils and sealers and protects against the formation of mold.Contains no solvents and VOC's and doesn't attack the caulking sealant on teak decks. Dries to a matte finish.Coverage. approx. 5 - 12 sq.m/l.
A solvent-free wood oil based on natural vegetable oils that refreshes the natural color of teak and emphasizes the grain of the wood. It also offers long-lasting protection against sea and fresh water, as well as UV radiation and weathering.SIKA Teak Oil Neutral has been specially tested to ensure that it does not attack teak decks sealed and grouted with SIKAFLEX-290 DC Pro.The light amber-colored oil is characterized by easy application and very low consumption.
The product uses natural active ingredients to remove weather-related graying and soilingstains from wooden surfaces and brightens the wood again. Ideal for pretreating old wooden surfaces that are to be oiled afterwards. Application: Shake the container well before use, then apply with a brush and leave it for 15 minutes. Wash off with water and a brush. Do not use in direct sunlight. Allow the surface to dry well afterwards.
Intensive cleaner to remove old wood oils, stains and etchants.DEEP CLEANER dislodges beautifully and thoroughly old oil paints and worn out glazes, oils and waxes, as well as weathering, on wood surfaces and gelcoats. Ideally suited for renovating teak decks.Applicable on all woods, that are used in boat building, it removes greying and grease spots and prepares the wood optimally for new impregnating by OWATROL DECK-SEALER for example.DEEP CLEANER contains sodium chloride (alkaline) as active component and is free of chlorine and sodium hydroxide. Please read the safety instructions and end user recommendations! Post-treatment and neutralisation with OWATROL DECK-CLEANER is recommended.
Especially efficient, alkaline cleaner, which removes old and persistent dirt and traces of decay, as well as dissolving remains of old oil treatments of teak.This treatment is surface-friendly since the old coats of paint do not have to be sanded off. Afterwards the wood is clean and ready for subsequent conditioning like brightening with TEAK-BRIGHTENER 2 and maintenance with TEAK-OIL 3. - it cleans timber pores deep-down of dirt. - removes remains of former oil treatments from below the surface. - Stained surfaces regain their former homogeneous, uniform look from the treatment. Shade of colour: green shaded, milky transparent.Yield approx.. 200 ml/m².
TEAK-BRIGHTENER 2 is a cleaner as well as brightener for weathered and greyed wood. It penetrates deep below the surface and cleans pores deep-down. It does not bleach or damage the wood in the process, but returns its former natural and full colour. The treatment with TEAK-BRIGHTENER 2 is surface-friendly since the old coats of paint do not have to be sanded off. Coats of paint, adhesive bondings or sealings will not be damaged by the cleaning process. - It cleans timber pores deep-down of dirt. - The original wood hue will return without sanding. - The wood will regain its former natural and full colour. Yield: when the wood is heavily greyed, undiluted approx. 200 ml/m², when cleaning (diluted 1:5 with water) approx. 50 ml/m².
Description Yachtcare Teak Oil 3 is an air-drying natural oil for the protection and care of teak wood. Thanks to its excellent penetration properties, it protects the wood exposed to weathering from the inside. It is particularly well suited for use on teak outdoor use. Teak Oil 3 penetrates completely into the wood and protects it effectively against moisture and weather conditions. It also contains UV protection and slows down greying. The oil does not form a layer on the surface and the non-slip safety especially on treads on board is retained. Consumption: approx. 100 – 200 ml/m², depending on the wood.
High-quality cleaning agent for teak and especially teak decks that are grouted, glued and sealed with SIKAFLEX.It removes dirt, salt residues and algae and at the same time brightens up grayed and weathered teak. It is also ideal for cleaning teak furniture. Complies with REACH guidelines and is biodegradable (EC 648/2004).Application: The wood to be treated should be soaked in water before use. Depending on the degree of soiling, the cleaner is worked in directly or diluted with water using a brush or an abrasive pad in the direction of the grain. After a short exposure time, the surface can then be rinsed with fresh water.
